MDP3880SP-U Data/Fax/Voice/Speakerphone 56K Modem IMPORTANT NOTES =============== A. FEATURES. B. WINDOWS 98 INSTALLATION. C. WINDOWS 95 OSR2 INSTALLATION. D. WINDOWS 95 & WINDOWS 95 SR1 INSTALLATION. E. WINDOWS NT4.0 INSTALLATION. F. WINDOWS 2000 INSTALLATION. G. HOW TO INSTALL FAX IN WINDOWS 98? H. WINDOWS 98 RELATED ISSUE. I. MODEM DIAGNOSTIC PROGRAM FOR WINDOWS 98. J. HOW TO UNINSTALL MODEM? ------------------------------------------------------------------------------------- A. FEATURES. ============= 1. This product is compatible to any Windows 95 platform. It is not meant for Windows 3.x and DOS platform. 2. Silent Detection is currently not supported in this release. 3. Windows DOS Terminal Emulation is supported. Due to the PCI way of assigning IRQ to the Modem, please do not use old DOS applications in WINDOWS 95 DOS Emulation Box. Try to use Up-To-Date DOS applications such as PROCOMM PLUS - Version 2.0 etc. To setup DOS Box support, please check the DOS Support Box under Modem Properties for this feature. ------------------------------------------------------------------------------------- B. WINDOWS 98 INSTALLATION. ============================ Installation of modem drivers in Windows 98 is similar to Win95. Note that Unimodem Drivers are not required for Windows 98. 1. Windows 98 will automatically detect "PCI Comunication Devices". Click "Next" to continue. "PCI Communication Devices" will be prompted by all MDP3880. 2. Insert the MDP3880 Modem Installation Disk provided into the CD-ROM Drive. 3. Select "Search for the best drivers for your device. (Recommended)" and click "Next" to continue. 4. Enable "CD-ROM drive" selection and click "Next" to continue. 5. Modem Driver will be found on the MDP3880 Installation Disk. Click "Next" to continue. 6. Click "Finish" to complete modem installation. 7. System will then automatically load all the necessary drivers and files needed. ------------------------------------------------------------------------------------- C. WINDOWS 95 OSR2 INSTALLATION. ================================= 1. Windows 95 will automatically detect "PCI Communication Devices". Click "Next" to continue in the "Upgrade Driver Wizard" dialog box. "PCI Communication Devices" will be prompted by the MDP3880 modem. 2. Insert the MDP3880 Installation Disk provided into the CD-ROM Drive. 3. Click "Next" and the system will search for an updated driver. 4. Click "Finish" to use the updated driver. 5. Click "Ok" when prompted to insert the installation disk. 6. Change path to D:\ (assuming the CD-ROM Drive is at D:) and click OK. 7. System will then automatically load all the necessary drivers and files needed. 8. Please reboot the system if prompted. ------------------------------------------------------------------------------------- D. WINDOWS 95 & WINDOWS 95 SR1 INSTALLATION. ============================================= 1. Windows 95 will automatically detect the PCI Modem and displays the "New Hardware Found" dialog box. 2. Insert the MDP3880 Installation Disk provided into the CD-ROM Drive. 3. Select the "Driver from disk provided by Hardware manufacturer option" and click OK. 4. Type the path to the Drive, eg. "D:\" (where your CD-ROM Drive is assigned) in the combo box and click OK. After loading the PCI modem device, if you encounter resource conflicts (especially when there are non-Plug & Play adaptors installed in your system), please follow the steps below to alter the resource configuration : 1. Go to Control Panel - System - Device Manager and click on "Modem". 2. Choose the modem device and click on "Properties". You can change the settings to resolve the conflict device. For further details, please refer to Trouble-shooting section in Windows 95. ------------------------------------------------------------------------------------- E. WINDOWS NT4.0 INSTALLATION. =============================== 1. Start Windows NT 4.0. 2. Insert the Installation Disk into the CD-ROM Drive (assuming the CD-ROM Drive is at D:). 3. Type "D:\Winnt4\Setup.exe" in the RUN option. 4. Follow any on-screen instructions to complete the software installation. 5. Restart your system after the installation. ------------------------------------------------------------------------------------- F. WINDOWS 2000 INSTALLATION. ============================== 1. Windows 2000 will automatically detect "PCI Simple Communications Controller". Click "Next" to continue. 2. Insert the MDP3880 Installation Disk provided into the CD-ROM Drive. 3. Select "Search for a suitable driver for your device. (Recommended)" and click "Next" to continue. 4. Enable "CD-ROM drive" selection and click "Next" to continue. 5. Modem Driver will be found on the MDP3880 Installation Disk. Click "Next" to continue. 6. Click "Finish" to complete modem installation. 7. System will then automatically load all the necessary drivers and files needed. ------------------------------------------------------------------------------------- G. How to install Microsoft Fax in WINDOWS 98? =============================================== If you are staying in US, go to directory D:\Tools\oldwin95\message\us in Windows 98 installation CD (assuming the CD-ROM Drive is at D:). For other countries, go to D:\Tools\oldwin95\message\intl 1. First run wms.exe under the directory to install Microsoft Messaging. 2. Next run awfax.exe under the same directory to install Microsoft Fax. For further information on Microsoft Messaging and Microsoft Fax, read wms-fax.txt under the same directory in Windows 98 CD. ------------------------------------------------------------------------------------- H. WINDOWS 98 RELATED ISSUE. ============================= User may encounter problem such as modem cannot dial out under Windows 98. Please close all modem applications and restart the Windows. Make sure you have connected the Phone Line before re-running the application again. ------------------------------------------------------------------------------------- I. MODEM DIAGNOSTIC PROGRAM FOR WINDOWS 98. ============================================ Note that this diagnostic program is applicable for MDP3880SP-U Modem. Select "Diagnose Modem" under the "Support & Customer Care" option. OS Support ========== This Diagnostic Utility works under WINDOWS 98 environment ONLY. This diagnostic program assumed that appropriate modem drivers are installed accordingly as stated in its installation guide. Important Notes: ================ Please closed all modem applications before running the diagnostic. As this diagnostic is CPU intensive, it is advisable that you also closed all other applications to avoid system slow down. The test includes: - Basic Modem Test Suite This test performs all basic tests to make sure that your modem is properly connected and setup. - Internet Dial-up Test Suite This test will make a dialup to your Internet Service Provider, it will check and report the current connection speed (connection speed is very dependent on the line conditions at the time of your connection). ------------------------------------------------------------------------------------- J. HOW TO UNINSTALL MODEM? =========================== For Windows 9x and NT4.0, product is installed with Uninstall Program allowing user to remove modem completely from the system. To perform an un-installation, proceed to Control Panel / Add/Remove Program icon. To complete, for Windows 9x and Windows NT4.0 you need to remove the "MDP3880SP-U Modem" and "MDP3880SP-U Modem Files". For Windows 2000, proceed to the Device Manager. Choose the "MDP3880SP-U Modem", right click on the mouse and select uninstall. Then go to Control Panel / Add/Remove Program icon and remove the "MDP3880SP-U Modem Files". ------- The End ---------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.