1. 9501P-DriverDisk-v2.zip Driver
2. LANTASTI.TXT File Contents

LANTASTI.TXT Driver File Contents (9501P-DriverDisk-v2.zip)

  Content:
  --------

      A) Install ENW-9501Plus drivers for LANtastic 5.0

      B) Install ENW-9501Plus drivers for LANtastic 6.0


A) Install ENW-9501Plus drivers for LANtastic 5.0
   ========================================

   LANtastic 5.0 can support following driver: NDIS driver


   Using NDIS driver:
   ----------------------
   For NDIS driver, it's provided the "ENWPCI.DOS" driver for
   ENW-9501Plus Ethernet adapter.  You can use "ENWPCI.DOS" driver to
   replace AEXNDIS.DOS which is the NDIS driver offered by ARTISOFT.

   Example  -----  CONFIG.SYS

        DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
        DEVICE=C:\LANTASTI\ENWPCI.DOS      -------> of ENW-9501Plus


   Example  -----  AUTOEXEC.BAT / STARTNET.BAT

        C:\LANTASTI\AI-NDIS BIND_TO=ENWPCI_NIF
        C:\LANTASTI\AILANBIO
        C:\LANTASTI\REDIR MachineName


   Example  -----  PROTOCOL.INI

        [PROTMAN]
           DRIVERNAME = PROTMAN$
           DYNAMIC = YES

        [ENWPCI_NIF]
           DRIVERNAME = ENWPCI$

   Comments:
     If you are using PROTMAN.DOS V1.x, you must use the NO_BIND
     option on the AI-NDIS command line in the STARTNET.BAT,
     and you need to run NETBIND.EXE V1.x before AILANBIO.EXE.


B) Install ENW-9501Plus drivers for LANtastic 6.0
   ========================================

   LANtastic 6.0 can support following driver: NDIS driver


  Using NDIS driver:
  ----------------------

   To install PLANET NDIS driver "ENWPCI.DOS", you can use the
   LANtastic 6.0  install program, and select "NDIS support for
   network adapters" then insert ENW-9501Plus driver diskette, and type
   path "A:\NDIS\DOS".  The Install program will search for 
   "ENWPCI.DOS" and "PROTOCOL.INI" and copy these two files to the
   target directory.

   If you already installed LANtastic 6.0 and need to install
   ENW-9501Plus PCI Ethernet Adapter, just replace AEXNDIS.DOS with
   ENW-9501Plus NDIS driver "ENWPCI.DOS" at CONFIG.SYS

   "ENWPCI.DOS"  is an NDIS driver of ENW-9501Plus
   "AEXNDIS.DOS" is an NDIS driver which supported by ARTISOFT


   Example  -----  CONFIG.SYS

        DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
        DEVICE=C:\LANTASTI\ENWPCI.DOS        -------> of ENW-9501Plus


   Example  -----  AUTOEXEC.BAT / STARTNET.BAT

    @echo ===== Begin LANtastic configuration =====
    SET LAN_CFG=C:\LANTASTI
    PATH C:\LANTASTI;%PATH%
    SET LAN_DIR=C:\LANTASTI.NET

    rem Please obtain the NETBEUI.EXE program from Microsoft
    NETBEUI
    AI-NDIS BIND_TO=AEXNDIS_NIF
    AILANBIO @STARTNET.CFG
    REDIR THOMAS @STARTNET.CFG

    SERVER C:\LANTASTI.NET @STARTNET.CFG
    NET LOGIN \\THOMAS
    @echo ===== End LANtastic configuration =====


   Example  -----  Protocol.ini

    [PROTMAN]
    Priority=NETBEUI
      DriverName = PROTMAN$
      Dynamic = Yes

    [NETBEUI_XIF]
      DriverName = netbeui$
      Sessions = 6
      NCBS = 12
      Bindings = ENWPCI_NIF
      LANABASE = 1

    [ENWPCI_NIF]
      DriverName = ENWPCI$


--- End of File ---