Contents: A. File Description B. Driver Installation for NetWare Server 4.11 C. Driver Installation for DOS32 D. Driver Installation for Microsoft Windows 3.x E. Driver Installation for Microsoft Windows 95 F. Parameters Description for ENW07.LAN A. File Description -------------------- ------------------------------------------------------------------------------- Filename Description ------------------------------------------------------------------------------- README.TXT This file. Presents a summary of the contents for NetWare Client32 driver installation. ENW07.LAN PLANET Client32 ODI driver for ENW07. This driver complies with NetWare ODI Serverdriver SPEC 3.3. ( in \NETWARE\ODI ) ENW07.LDI The driver (ENW07.LAN) installation information file for NetWare Server 4.11, NeDOS32, Microsoft Windows 3.x. ENW07.INF The driver (ENW07.LAN) installation information file for Microsoft Windows 95. ------------------------------------------------------------------------------- B. Driver Installation for NetWare Server 4.11 1. Change directory to NetWare Server directory (for example: CD\NWSERVER ) 2. Load NetWare Server System by typing SERVER, then press <Enter>. 3. When the Server prompt appears, load the NetWare Server Installation Utility. That is, :LOAD INSTALL 4. Select "Driver options" from "Installtion Options" menu, then press <Enter>. 5. Select "Configure network drivers" from "Driver Options" menu, then press <Enter>. 6. Select "Select a driver" from "Additional Driver Actions" menu, then press <Enter>. 7. Press <Ins> to install an unlisted driver, then press <F3> to specify a different path. 8. Insert PLANET ENW07 Driver Diskette to your PC's floppy drive and specify the drive (A: or B:). 9. Select "ENW-9501Plus PCI Series Ethernet driver" from "Select a driver to installed:" menu, then press <Enter>. 10. If necessary, select "Select/Modify driver parameters and protocols" from "Board ENW07_1 (Driver ENW07) Actions" menu, then press <Enter> to set up the driver parameters. (Please refer to content F.) Otherwise, select "Save parameters and load driver", then press <Enter>. 11. Following instructions to complete the driver installation. 12. Sample AUTOEXEC.NCF for NetWare Server 4.11 AUTOEXEC.NCF (one board) ======================== LOAD C:ENW07 FRAME=ETHERNET_802.2 NAME=E_8022 LOAD C:ENW07 FRAME=ETHERNET_802.3 NAME=E_8023 LOAD C:ENW07 FRAME=ETHERNET_II NAME=E_II LOAD C:ENW07 FRAME=ETHERNET_SNAP NAME=E_SNAP BIND IPX E_8022 NET=10 BIND IPX E_8023 NET=20 BIND IPX E_II NET=30 BIND IPX E_SNAP NET=40 AUTOEXEC.NCF (two boards) ========================= LOAD C:ENW07 SLOT=10001 FRAME=ETHERNET_802.2 NAME=E_8022_1 LOAD C:ENW07 SLOT=10001 FRAME=ETHERNET_802.3 NAME=E_8023_1 LOAD C:ENW07 SLOT=10001 FRAME=ETHERNET_II NAME=E_II_1 LOAD C:ENW07 SLOT=10001 FRAME=ETHERNET_SNAP NAME=E_SNAP_1 LOAD C:ENW07 SLOT=10002 FRAME=ETHERNET_802.2 NAME=E_8022_2 LOAD C:ENW07 SLOT=10002 FRAME=ETHERNET_802.3 NAME=E_8023_2 LOAD C:ENW07 SLOT=10002 FRAME=ETHERNET_II NAME=E_II_2 LOAD C:ENW07 SLOT=10002 FRAME=ETHERNET_SNAP NAME=E_SNAP_2 BIND IPX E_8022_1 NET=10 BIND IPX E_8023_1 NET=20 BIND IPX E_II_1 NET=30 BIND IPX E_SNAP_1 NET=40 BIND IPX E_8022_2 NET=50 BIND IPX E_8023_2 NET=60 BIND IPX E_II_2 NET=70 BIND IPX E_SNAP_2 NET=80 C. Driver Installation for DOS32 1. If you have installed the NetWare Client 32 for DOS, all you have to do is modify STARTNET.BAT. Please see the sample STARTNET.BAT below these installation instructions. 2. Run INSTALL.EXE from NetWare DOS 32 diskette (or from NetWare 4.11 CD). When the product manual appears, check the "NetWare Client 32 for DOS" item, then press <Enter>. 3. Select "OTHER DRIVERS" item from "32-bit Network Board Drivers" menu, then press <Enter>. 4. Insert PLANET ENW-9501Plus Driver Diskette into your floppy diskette drive, then specify the driver path like A: or B:. 5. Select "ENW-9501Plus PCI Series Ethernet driver", then press <Enter>. 6. Refer to Content F. and set the correct driver parameters to comply with your network environment, then press <F10> to continue. 7. Following instructions to complete the Client32 for DOS software installation. 8. Reboot your machine. Sample STARTNET.BAT for DOS32. ============================== SET NWLANGUAGE=ENGLISH C:\NOVELL\CLIENT32\NIOS.EXE LOAD C:\NOVELL\CLIENT32\LSLC32.NLM LOAD C:\NOVELL\CLIENT32\CMSM.NLM LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM LOAD C:\NOVELL\CLIENT32\ENW07.LAN FRAME=ETHERNET_802.2 LOAD C:\NOVELL\CLIENT32\ENW07.LAN FRAME=ETHERNET_802.3 LOAD C:\NOVELL\CLIENT32\ENW07.LAN FRAME=ETHERNET_II LOAD C:\NOVELL\CLIENT32\ENW07.LAN FRAME=ETHERNET_SNAP LOAD C:\NOVELL\CLIENT32\IPX.NLM LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM D. Driver Installation for Microsoft Windows 3.x Please refer to Content C., in step 2, mark "Netware Client 32 for DOS" and "Client 32 for Windows", then follow step 3..8 to complete the installation. E. Driver Installation for Microsoft Windows 95 If you have installed the Microsoft Client in your Windows 95 system, you should remove the adapter object and NDIS 2/3 driver for the ENW-9501Plus adapter from Windows 95 system. No matter if you have installed the DEC DC21x4 based driver or PLANET's ENW-9501Plus NDIS 2/3 driver, before you install ENW-9501Plus Client 32 driver, you should take the following steps. E.1 Remove adapter object & driver for DECchip 21143 or ENW-9501Plus ===================================================== 1. Click the "My Computer" icon in the Main Program Group. 2. Click the "Control Panel" icon in My Computer window. 3. Click the "System" icon in the Control Panel window. 4. Click the "Network adapter" icon in System window. 5. Click the "PCI Fast Ethernet DECchip 21143 Based Adapter" or "ENW-9501Plus PCI fast Ethernet Adapter" icon in System window. 6. Click <Remove> button, then click <OK> button. 7. Close the opened windows. Note: If you NEVER pluged an ENW-9501Plus PCI adapter into your PC, Procedure E.1 is not necessary. And you just start from Procedure E.2. E.2 Install the Client 32 driver installation information file ========================================================== 8. Switch to an MS-DOS Command Prompt window. 9. Insert the PLANET ENW-9501Plus Driver Diskette into your PC's floppy drive (A: or B:) 10. Type the following DOS commands: CD \WINDOWS\INF RENAME NETPCI.INF *.IN_ RENAME ENWPCI.INF *.IN_ COPY A:\LANDRV32\ENW07.INF EXIT Notice: The above commands are collected in the SetWin95.BAT file in the directory \LANDRV32. That is you can execute the following program to install the Client 32 driver installation information file. A:\LANDRV32\SETWIN95 C:\WINDOWS where C:\WINDOWS is your Windows 95 system directory. 11. Shutdown and turn off the machine. E.3 Client 32 Driver Installation on Windows 95 ===================================================== 12. Plug PLANET's ENW-9501Plus adapter into one of the Master PCI slots of your PCI platform. 13. Turn the power on and then boot from Windows 95. 14. Windows 95 will prompt with PCI Ethernet Controller in the New Hardware Found dialog box. 15. Windows 95 will prompt with "ENW-9501Plus PCI Fast Ethernet Adapter" in the New Hardware Found dialog box. 16. Follow instructions to complete the installation. Note: Windows 95 will ask you to key in the proper path of the following diskette: a. NetWare Client 32 for Windows 95 Disk b. PLANET ENW-9501Plus PCI Series Ethernet Adapter Driver Diskette --> Insert PLANET ENW-9501Plus Series Driver Diskette, then, assign the path to A:\LANDRV32 or B:\LANDRV32 c. Windows 95 CD-ROM F. Parameter Description for ENW07.LAN The following parameters are used in ENW07.LAN. 1. SLOT: specifies which adapter is enabled when multiple ENW-9501Plus adapters are found in your computer. The SLOT keyword is an index value corresponding to PCI BIOS. The value of SLOT is different from one machine to the other. Ex: LOAD ENW07 SLOT=10001 FRAME=ETHERNET_802.2 LOAD ENW07 SLOT=10004 FRAME=ETHERNET_II 2. FRAME : specifies which frame type is used by the driver. Accepted values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and Ethernet_SNAP. Multiple frame types can be enabled by the driver by loading the same driver with different FRAME types. Ex: LOAD ENW07 FRAME=ETHERNET_802.2 LOAD ENW07 FRAME=ETHERNET_802.3 LOAD ENW07 FRAME=ETHERNET_II LOAD ENW07 FRAME=ETHERNET_SNAP 3. NODE : Use a different address to replace the node address burned in EEPROM. Ex: LOAD ENW07 NODE=0200E8001122 4. Attachment: Specifies the connection type of the ENW-9501Plus adapter. Default value is AUTODETECT. Driver Parameters Description ================= ===================================== AUTODETECT (Autodetect) for ENW-9501Plus, run-time autosenses the connection type and line speed. TP (Twisted Pair) Connector type is RJ-45. When Line_Speed=10, it is 10BaseT and when Line_Speed=100, it is 100BaseTx. TP_FULL_DUPLEX (Twisted pair - Full Duplex) Connector is RJ-45 with Full Duplex mode enabled. The throughput is 20Mbps for 10BaseT and 200Mbps for 100BaseTx. TP_NO_LINK_TEST (Twisted pair with link test disabled) Connector is RJ-45, but the link test function of the transceiever is disabled. This function should be enabled if your repeater does not support the link test function. Ex: LOAD ENW07 TP LOAD ENW07 TP LINE_SPEED=100 LOAD ENW07 BNC LOAD ENW07 AUTODETECT LOAD ENW07 TP_FULL_DUPLEX LINE_SPEED=100 5. LINE_SPEED: (Line_Speed) Specify the speed of your network adapter. Accepted values are 10 and 100. No default value is assigned. 6. TURBO : (Turbo mode) Enhances the performance when your PCI platform uses DEC chip. 7. SNOOZE : (Snooze mode) With ENW-9501Plus new NIC, Snooze mode can reduce power consumption. The NIC stops most of its internal clock operation except when network activity is detected. This is not a default function of ENW07.LAN. 8. CAPTURE_EFFECT: (Enables the function for solving the Capture Effect problem.) The driver offers a vendor supported function to avoid starvation when multiple collisions occur on the line. But this function is not part of the Ethernet SPEC. You can use this parameter to enable the function. -- End of File --Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.