UPDATE.TXT Driver File Contents (tritonf.zip)

                        U P D A T E  N O T I C E

                               for Triones
                    Bus Master EIDE/ATAPI Device Driver
                          for Intel Triton Chipset

                               Version 3.0

                             (October 1, 1995)


1.  Some ATAPI CD-ROM drives need different workarounds. These workarounds
    were added into the drivers. Now more ATAPI CD-ROM models are supported.
    The following CD-ROM drives were fully tested:
        MITSUMI FX400,FX400B,FX400C,FX400D
        SONY CDU55E,CDU76E,CDU77E,CDU78E
        HITACHI CDR-7730
        NEC CDR260R,CDR271,CDR272,CDR273
        TOSHIBA XM-5302B
        WEARNES CDD-120A,CDD-220,
        OAK EVALUATION
        PHILIPS LMS CM207

2.  New workaround about WD Caviar hard disk drives recommended by Western 
    Digital was used.

3.  In Windows 95 system, when entering the DOS mode, the original PIIX 
    configuration and drive configuration will be restored. There will be
    no more error message or garbage characters when exiting into the 
    DOS mode.

4.  The driver for Windows 95 now allows a maximum 64K data transfer size
    for one command. The performance is much better than before.

5.  For the previous versions, if a Windows 95 system was installed 
    without the DOS or Windows 3.1 pre-installed, for the following 
    device combination:
            0x1F0:  a DMA supported disk drive
            0x170:  a PIO only CD-ROM drive
    accesssing the CD-ROM sometimes would result in an "Exception 0E ..."
    error message.
    This issue now is fixed.





Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.21