1. windows_xp_monitors.zip Driver
2. Driver_install02.txt File Contents

Driver_install02.txt Driver File Contents (windows_xp_monitors.zip)

Use the information file ( .inf)

                          for Windows 95/98/2000/Me/XP or later



Philips' monitors build in VESA DDC2B feature to support Plug & Play
requirement for Windows 95/98/2000/Me/XP . You can install this 
information file ( .inf) in order to select your Philips monitor from
"Monitor" dialog box in Windows 95/98/2000/Me/XP to activate Plug & 
Play application. The installation procedure based on Windows '95 OEM
Release 2 , 98 , Me , 2000 and XP are specified as follows,



For Windows 95
==============

1. Start Windows '95
2. Click the 'Start' button, point to 'Setting', and then click 
   'Control Panel'.
3. Double Click the 'Display' Icon.
4. Choose the 'Settings' tab then click 'Advanced...' button.
5. Choose 'Monitor' button, point to 'Change...' then click 
   'Have Disk...' button.
6. Click 'Browse...' button then choose the appropriate drive 
   F: ( CD-ROM Drive) then click 'OK' button.
7. Click the 'OK' button then choose your monitor model and click
   the 'OK'.
8. Click 'Close' button.




For Windows 98
==============

1. Start Windows 98
2. Click the 'Start' button, point to 'Setting', and then click 
   'Control Panel'.
3. Double Click the 'Display' Icon.
4. Choose the 'Settings' tab then click 'Advanced...' button.
5. Choose 'Monitor' button, point to 'Change...' then click 'Next'
6. Choose "Display a list of  all the drivers in a specific location, 
   so you can select the driver you want." then click 'Next' and then 
   click 'Have Disk...' button.
7. Click 'Browse...' button then choose the appropriate drive 
   F: ( CD-ROM Drive) then click 'OK' button.
8. Click the 'OK' button then choose your monitor model and click the
   'Next' button then click 'Next' button.
9. Click 'Finish' button then the 'Close' button.




For Windows Me
==============

1.  Start Windows Me
2.  Click the 'Start' button, point to 'Setting', and then click 
    'Control Panel'.
3.  Double Click the 'Display' Icon.
4.  Choose the 'Settings' tab then click 'Advanced...'.
5.  Choose 'Monitor' button, then click 'Change...' button.
6.  Choose "Specify the location of the driver(Advanced)" and click  
    the 'Next' button.
7.  Choose "Display a list of  all the drivers in a specific location,
    so you can select the driver you want." then click 'Next' and then
    click 'Have Disk...' button.
8.  Click 'Browse...' button then choose the appropriate drive 
    F: ( CD-ROM Drive) then click 'OK' button.
9.  Click the 'OK' button then choose your monitor model and click the
    'Next' button then click 'Next' button.
10. Click 'Finish' button then the 'Close' button.





For Windows 2000
================

1.  Start Windows 2000
2.  Click the 'Start' button, point to 'Setting', and then click 
    'Control Panel'.
3.  Double Click the 'Display' Icon.
4.  Choose the 'Settings' tab then click 'Advanced...'.
5.  Choose 'Monitor' 
    - If the 'Properties' button is inactive, it means your monitor is 
      properly configured. Please stop installation.
    - If the 'Properties' button is active. Click 'Properties' button. 
      Please follow next step continually.
6.  Click 'Driver' and then click on 'Update Driver...' then click on 
    the 'Next' button.
7.  Choose "Display a list of  the known drivers for this device so 
    that I can choose a specific driver" then click 
    'Next' and then click 'Have disk...'.
8.  Click 'Browse...' button then choose the appropriate drive 
    F: ( CD-ROM Drive).
9.  Click the 'Open' button, then click the 'OK' button.
10. Choose your monitor model and click the 'Next' button then click 
    'Next' button.
11. Click 'Finish' button then the 'Close' button.
If you can see the "Digital Signature Not Found" window then click the 'Yes' button. 





For Windows XP
================

1.  Start Windows XP
2.  Click the 'Start' button and then click 'Control Panel'.
3.  Pick and click the category 'Printers and Other Hardware'
4.  Click the 'Display' Item.
5.  Choose the 'Settings' tab then click 'Advanced' button.
6.  Choose 'Monitor' tab
    - If the 'Properties' button is inactive, it means your monitor is
      properly configured. Please stop installation.
    - If the 'Properties' button is active. Click 'Properties' button.
      Please follow next steps accordingly.
7.  Click the 'Driver' tab and then click on 'Update Driver...' button.
8.  Choose the 'Install from a list or specific location [advanced]' radio
    button and then click on the 'Next' button.
9.  Choose the ' Don't Search. I will choose the driver to install' radio
    button. Then click on the 'Next' button.
10. Click the 'Have disk...' button then click the 'Browse...' button. Then 
    choose the appropriate drive F: ( CD-ROM Drive).
11. Click the 'Open' button, then click the 'OK' button.
12. Choose your monitor model and click the 'Next' button.
    - If you can see the 'has not passed Windows Logo testing to 
      verify its compatibility with Windows XP' message please click
      the 'Continue Anyway' button. 
13. Click 'Finish' button then the 'Close' button.
14. Click 'OK' button and then the 'OK' button again to close the Display 
    Properties dialog box.



If your Windows 95/98/2000/Me/XP version is different or you need more
detailed installation information, please refer to Windows 95/98/2000/Me/XP 
user's manual.