3c589 3Com EtherLink III PC Card adapter
DRIVERNAME = ELPC3$
2nd driver name = ELPC32$
MEMORY = 0xEF00
adapter memory window (optional)
If parameter not present in protocol.ini, driver auto selects a
free 4K memory window. Released after initialization of card.
If specified, forces driver to use this address to map card's CIS
memory during driver initialization. Window is released after driver
finishes initializing card or fails to find card.
Use 0xC000 - 0xEF00 in steps of 0x100
IOADDRESS = 0x300
adapter base address (optional)
If parameter not present in protocol.ini, driver uses the value
saved from running Diagnostic/Configuration program.
This parameter is only used to specify a single adapter in a multi-
adapter configuration. Must match value set by Diagnostic/Config.
Use 0x200 - 0x3E0 in steps of 0x10
INTERRUPT = 0xA
interrupt channel number (optional)
Use 3,5,7,9,0xA,0xB,0xC,0xF
SLOT = 2
PCMCIA slot number (optional)
If parameter not present in protocol.ini, driver searches all slots
looking for an EtherLink3 PCMCIA Card.
This parameter is only used to specify a single adapter in a multi-
adapter configuration.
Use 0 - 8
NETADDRESS = "0020AF123456"
network address (optional, default = card's netaddress EEPROM value)
the network address is 12 hex digits enclosed in quotes
MAXTRANSMITS = 8
number of transmit queue elements (optional, default = 6)
Min = 2, Max =50
Use the default for DOS clients
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.