SCO5MDI.TXT Driver File Contents (rL100ATX.zip)

       ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
       º                                                              º
       º    Compex RL100ATX 10/100Base-TX PCI Fast Ethernet Adapter   º
       º        (C) Copyright PDS, 1998. All Rights Reserved.         º
       º                                                              º
       ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ GENERAL INFORMATION ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
    SCO UNIX OpenSever v5.0 installation

    Adapters supported:

      o --  Compex RL100ATX 10/100Base-TX PCI Fast Ethernet


 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

1) Login as root user. (maintenance mode)

2) Execute "custom"

    A menu selection screen will be popped up.
    Using [->] key to move cursor to "Software" menu item then
    press [] key to get into pull down menu then move to
    "Install New..." then press [ENTER] key


          ÉÍÍÍÍÍÍÍÍÍÍ Begin Installation on scoopen ÍÍÍÍÍÍÍÍÍÍ»
          º                                                   º
          º  What host (machine) do you want to install from? º
          º                                                   º
          º  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º
          º  ³<*> From scoopen                              ³ º
          º  ³< > From another host                         ³ º
          º  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º
          º                                                   º
          ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
          º[ Continue ]        [ Cancel ]         [ Help]     º
          ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

        Select From scoopen and use [TAB] key to move cursor to [ Continue ]
        then press [ENTER] key and press [] key to get into pull down menu

          ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Select Media ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
          º                                                              º
          º  Insert media, and select media device.                      º
          º                                                              º
          º               ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º
          º  Media Device:³|Floppy Disk Driver 0_____________________|v³ º
          º               ÀÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º
          º                ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º                    º
          º                º³*Floppy Disk Driver 0 ³º                    º
          º                º³ Media Images         ³º                    º
          ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
          º[ Continue ]    ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ          [  Help  ]º
          ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ


        -> Select "Floppy Disk Driver 0" and use [TAB] key to move cursor to
           [ Continue ] then press [ENTER] key then press [ENTER] key
           again

   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Install Reference on scosysv ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
   º                                                                        º
   º Installing: Compex RL100ATX 10/100Base-TX PCI Fast Ethernet Adapter    º
   º                                                                        º
   º Do you want a FULL or PARTIAL installation?                            º
   º                                                                        º
   ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
   º[  Full   ]           [ Partial ]         [ Cancel  ]         [  Help  ]º
   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

        Using [TAB] key to move cursor to [ Full ] then press [ENTER] key

        After the installation progress the following message is displayed


                       ÉÍÍÍÍÍÍÍÍÍÍÍ Question ÍÍÍÍÍÍÍÍÍÍ»
                       º     Installation complete     º
                       ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
                       º            [ OK ]             º
                       ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

       Press [Enter] key and the selected adapter,

                Compex RL100ATX 10/100Base-TX PCI Fast Ethernet

        is added to the package list

        Using [<-] key to move cursor back to "Host" menu item then
        press [] key to get into pull down menu then move to "Exit"
        then press [ENTER] key

        Now that the driver is installed in the system successfully.


4) Execute "netconfig" to configure the driver

   A menu selection screen will be popped up.
   At "Hardware" menu item press [] key to get into pull down menu then
   move to "Add new LAN adapter" then press [ENTER] key



ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add new LAN adapter ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
ºThe following adapters have been found:                                     º
ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º
º³* Compex RL100ATX 10/100Base-TX PCI Fast Ethernet adapter -PCI Bus#0, PCI#³º
º³                                                                          ³º
º³                                                                          ³º
º³                                                                          ³º
º³                                                                          ³º
ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº
º[ Configure hardware not listed above... ]                                  º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ Continue ]                       [  Cancel  ]                   [  Help  ]º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

   Use the Tab key to move to [Contiune] and then press [ENTER] key.


ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add Protocol ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
ºSelect one networking product to be added to                                º
ºCompex RL100ATX 10/100Base-TX PCI Fast Ethernet Adapter:                           º
ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º
º³ HW Compex RL100ATX 10/100Base-TX PCI Fast Ethernet Adapter               ³º
º³    - SCO IPX/SPX                                                         ³º
º³ *  - SCO TCP/IP                                                          ³º
º³                                                                          ³º
º³                                                                          ³º
ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[  Add   ]                        [ Cancel ]                      [  Help  ]º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

   Using [] key to move cursor to "SCO TCP/IP" then press [ENTER] key.

   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ SCO TCP/IP Configuration ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
   º                                                         º
   º                                                         º
   º                                                         º
   º                                                         º
   º  Local Host Name:  |scoopen_____________| [ Advanced   ]º
   º       IP Address:  |203.120.12.10_______|   Options...  º
   º          Netmask:  |255.255.255.0_______|               º
   ºBroadcast Address:  |203.120.12.255______|               º
   º      Domain Name:  |scoopen.com_________|               º
   º  TCP connections:  |256_________________|               º
   º      Pseudo ttys:  |32__________________|               º
   º                                                         º
   º                                                         º
   ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
   º                                                         º
   º [   OK   ]             [ Cancel ]            [  Help   ]º
   º                                                         º
   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
    * Note:- the values above are just examples. Contact your administrator
             for the proper information for your network.

   Input the required information then use [TAB] key to move cursor to "OK"
   then press [ENTER] key.


ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Message ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º The following products were successfully configured into the system          º
º SCO TCP/IP                                                                   º
º Compex RL100ATX 10/100Base-TX PCI Fast Ethernet Adapter - PCI Bus#0,PCI Devicº
º                                                                              º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ OK ]                                                               [ Help ] º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

   Press [ENTER] key


   At "Hardware" menu item press [] key to get into pull down menu then
   move to "Exit" then press [ENTER] key

  ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Question ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
  º     The Unix Kernel must be re-linked before the changesº
  º???  made here will have an effect.                      º
  º     Do you want to re-link the kernel now?              º
  ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
  º [  YES   ]                                      [ NO  ] º
  ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

   Press [ENTER] key

   Do you want this kernel to boot by default (y/n)    y

   Do you want the kernel environment rebuilt (y/n)    y

5) Reboot unix

   # shutdown -y -g0

6) On rebooting, Compex RL100ATX 10/100Base-TX PCI Fast Ethernet adapter
   will be initialized. Press Control-D to startup the server.
   Compex RL100ATX 10/100Base-TX PCI Fast Ethernet adapter is now ready to
   service the network.





Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.00