HP DesignJet 800PS Windows driver This ReadMe file includes last-minute information. "Unrecognized error 10035" WHILE PRINTING USING IP OR IPX PRINT PATHS If you send several print jobs to the printer at the same time using the IP or IPX print paths, the following error message may be shown on the computer: "Error writing to <printer name> for <print job name>: Unrecognized error 10035. Do you wish to retry or cancel the job?" The message occurs with Windows NT 4.0 and Windows 2000, and can also be seen if several print jobs are sent to the printer at the same time from different sources. If you see this message, click "Retry" to continue with the job. If you are printing using IPX and encounter this problem frequently, we recommend that you print using the IP protocol instead. INDESIGN 1.0 You are recommended to upgrade to InDesign 1.5, which supports Windows 2000. The multiple copies option does not work correctly from the Advanced window. You should select this option in the Print window. FREEHAND The driver settings are not applied to the job. You are recommended to upgrade to Freehand 8.0.1 or Freehand 9.0. With Freehand 8.0.1, you should change the driver settings in the spooler under "Document Defaults". FREEHAND WITH LOCALIZED PPDS Freehand has problems with localized PPDs, it is not possible to change the PPD settings inside Freehand. Workaround: use English PPD instead. PROFILE NAMES The following table describes the ICC Profiles supplied with the driver: Profile name Profile Description HP105HCP.icm HP 1055/1050 CM Heavy Coated Paper HP105HGP.icm HP 1055/1050 CM High Glossy Photo HPCPHC.icm HP DesignJet CP Heavy Coated HPCPHG.icm HP DesignJet CP High Glossy HPCPSG.icm HP DesignJet CP Semi Glossy The 800 ICC profiles are suplied in the CD. You also can download them from www.hp.com. Copyright 2000 Hewlett-Packard CompanyDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.