1. intel_10.zip Driver
2. LANTAS60.TXT File Contents

LANTAS60.TXT Driver File Contents (intel_10.zip)

   LANtastic 6.0
                                                                    v1.00


LANtastic* 6.0 installation notes for the Intel EtherExpress(TM) 10 ISA
LAN adapter
=======================================================================
   
   Location of driver:     \NDIS\EX10.DOS


General Instructions
--------------------

The installation procedure transfers files to a specific directory on the
workstation and creates or modifies existing configuration files to fit
your specific needs. The installation utility, INSTALL.EXE, is located on
LANtastic Network Software Disk 1.

Run INSTALL.EXE from Disk 1. The LANtastic Install program screen
appears. You must complete each of the questions. These options are
specific to your needs.

   Step 1 prompts you to enter a unique Computer Name.

   Step 2 asks you to select the drive you want LANtastic installed on.
   The default is Drive C:.

   Step 3 asks you to specify the directory you want the LANtastic files
   installed. The default is \LANTASTI.

   Step 4 asks you if you want to Share your Computer's Drives or
   Printers.

   Step 5 asks you to select the Maximum Number of Connected Computers.

   Step 6 prompts you to select any other LANtastic features you may want
   to install.

   Step 7 is a summary screen of the options you selected. If it looks
   correct, continue with the installation.

   Step 8 prompts you to select a network adapter to run your LANtastic
   software on. From the list of adapters, select "NDIS Support for
   Network Adapters".

   Step 9 asks you to insert the manufacturer's driver diskette
   containing the driver files. Insert the 10 ISA LAN adapter disk into
   drive A: and specify the source path for driver files as A:\NDIS.

   Step 10 asks if you want to Set Up Permanent Drive or Printer
   Connections.

   Step 11 is another summary screen of the options you selected. If this
   looks correct, select Perform the Installation and LANtastic will
   install the files.


Tips and Hints
==============

1  Below are sample CONFIG.SYS, STARTNET.BAT and PROTOCOL.INI files.
   These are the three files with EtherExpress(TM) 10 ISA adapter
   configuration options, which the Install program creates.


Sample CONFIG.SYS file
----------------------
   
   DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
   DEVICE=C:\LANTASTI\EX10.DOS
   FILES=40
   BUFFERS=30


Sample C:\LANTASTI\STARTNET.BAT file
------------------------------------
   
   @echo off
   rem LANtastic  Version 6.00  installed 95/05/25 03:38:23
   rem (for Windows)
   C:
   cd C:\LANTASTI
   SET LAN_CFG=C:\LANTASTI
   rem If LANtastic is disabled, skip everything.
   IF EXIST DISABLED GOTO :STARTNET_DONE
   @echo ===== Begin LANtastic configuration =====
   PATH C:\LANTASTI;C:\LANTASTI\NW;%PATH%
   SET LAN_DIR=C:\LANTASTI.NET
   SET NWDBPATH=C:\LANTASTI\NW
   LOADHIGH AI-NDIS BIND_TO=EX10_NIF
   AILANBIO @STARTNET.CFG
   REDIR LAB1 @STARTNET.CFG
   IF EXIST NOSHARE GOTO :NOSHARE
   SERVER C:\LANTASTI.NET @STARTNET.CFG
   NET LOGIN \\LAB1
   GOTO :CONTINUE
   :NOSHARE
   @echo LANtastic server was installed but turned off.
   :CONTINUE
   rem If CONNECT.BAT exists, run it to set up connections.
   IF EXIST CONNECT.BAT GOTO :CONNECT
   rem Otherwise set up connections specified during install.
   NET USE LPT1: \\LAB1\@PRINTER
   NET LPT TIMEOUT 10
   GOTO :CONNECT_DONE
   :CONNECT
   @echo Setting up LANtastic connections from CONNECT.BAT
   rem Build CONNECT.BAT like this: "NET SHOW/BATCH >
   C:\LANTASTI\CONNECT.BAT"
   rem   (or run the batch file SETNET.BAT)
   call CONNECT.BAT
   :CONNECT_DONE
   NET POSTBOX
   @echo ===== End LANtastic configuration =====
   :STARTNET_DONE
   cd \


Sample C:\LANTASTI\PROTOCOL.INI file
------------------------------------
   
   ;PROTOCOL.INI for LANtastic Version 6.00
   [PROTMAN]
      DRIVERNAME = PROTMAN$
      DYNAMIC = YES
   
   ; PROTOCOL.INI section for the Intel EtherExpress 10 ISA LAN
   ; adapter.
   [EX10_NIF]
      DRIVERNAME = EX10$
      IOADDRESS = 0x300

Note:The I/O address for the EtherExpress 10 ISA adapter is specified in
     the PROTOCOL.INI with the line IOADDRESS=0x300.  If you have
     changed the adapter's I/O address from the default of 300, change
     this value to match what EX10Set indicates.



* Third-party trademarks are the property of their respective owners.