Latest news about your EtherExpress 10 ISA adapter
v1.01
NetWare* server, Windows NT*, and OS/2* users
---------------------------------------------
If you have a Plug and Play BIOS and are running OS/2, Windows NT, or a
NetWare server, make sure you disable Plug and Play on your adapter using
EX10SET.EXE. Having Plug and Play enabled on your adapter may cause
configuration problems because these environments don't support Plug and
Play.
Windows* 95 users
-----------------
Enabling Plug and Play
If using Windows 95, leave Plug and Play enabled on your adapter. This is
the default setting. If Windows 95 doesn't automatically recognize your
adapter, run EX10Set and make sure Plug and Play is enabled. For more
information, see the readme file called Plug and Play Computers.
Running EX10Set
If you're running Windows 95 and want to use EX10Set, run it in Windows
95's MS-DOS* mode. To enter MS-DOS mode, choose Shut Down from the Start
menu, select Restart the computer in MS-DOS mode, and click Yes.
PCI/ISA computers
-----------------
If you install the adapter in a PCI/ISA computer, you should keep the
adapter configured for 16-bit mode; it may not work properly if set to 8-
bit mode.
XT computers
------------
Intel EtherExpress 10 ISA adapters don't support XT computers (8086's
and 8088's). Try contacting your computer vendor or reseller for a
network adapter that supports XT computers.
Undetectable IRQs
-----------------
EX10Set can reliably detect most IRQs used in a computer. However, some
devices use IRQs in a way this program can't detect. If you have problems
with the computer after installing the adapter, make sure no other device
uses the same IRQ as the adapter.
NE2000 adapters
---------------
You can't run EX10Set when NE2000 drivers are loaded. If you're
installing the adapter in a computer with an NE2000 adapter, restart the
computer without loading the drivers before you run EX10Set.
* Third-party trademarks are the property of their respective owners.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.