ISA adapters in EISA slots
v1.00
Installing an EtherExpress(TM) 10 ISA adapter in an EISA slot
=================================================================
You can install the EtherExpress(TM) 10 ISA adapter in an EISA slot.
Installation requires three steps:
1. Put the adapter in the computer.
Follow the procedure in the Installation Guide for installing the
adapter into a slot in the computer.
2. Set the computer's EISA configuration.
A Restart the computer.
B Run the most recent version of the EISA Configuration Utility (ECU)
for this computer.
C From the Main menu, select the command for configuring the
computer.
D Choose the menu item that allows you to add an adapter to your
computer, then select the slot where the adapter is located.
E Select the command that allows the ECU to read the adapter's EISA
configuration files from the Intel diskette.
F When prompted, insert the Intel Configuration and Drivers disk,
then select the appropriate file from the list of available adapter
configuration files. For the EtherExpress 10 ISA adapter, choose
!int1100.cfg.
G Write down the settings you want to assign to the EtherExpress 10
ISA adapter and exit the program. (You must choose settings that
aren't used by any other device in the computer.)
3. Configure the adapter with EX10Set.
A Insert the Intel configuration disk into a drive, switch to that
drive, and type EX10SET.
B From the Main menu, select Change Adapter Configuration.
C Select the configuration settings you chose in the EISA
configuration program.
D Continue with the setup procedure by testing the adapter and
installing the driver as shown in the Installation Guide.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.