;- This file gives examples of load and bind statements to ;- add to your AUTOEXEC.NCF and STARTUP.NCF files to set up ;- Adapter Fault Tolerance on Intel EtherExpress(TM) ;- PRO/100+ TX PCI Adapters. ;- Setting up Adapter Fault Tolerance ;- ================================== ;- Copy the load statements below into the appropriate ;- files and customize them for your server. Parameters for ;- these statements are defined in your user documentation ;- and in the AFT readme files. ;- Copy the following statement into your STARTUP.NCF file: ;- Load Adapter Fault Tolerance load aft ;- Copy the rest of the load statments into your ;- AUTOEXEC.NCF file, and customize them for your server: ;- Load LAN driver on 1st Adapter load e100b slot=7 frame=ethernet_802.2 name=pri_802.2 load e100b slot=7 frame=ethernet_802.3 name=pri_802.3 load e100b slot=7 frame=ethernet_snap name=pri_snap load e100b slot=7 frame=ethernet_ii name=pri_ii ;- Load LAN driver on 2nd Adapter load e100b slot=8 frame=ethernet_802.2 name=sec_802.2 load e100b slot=8 frame=ethernet_802.3 name=sec_802.3 load e100b slot=8 frame=ethernet_snap name=sec_snap load e100b slot=8 frame=ethernet_ii name=sec_ii ;- Bind ipx to 1st adapter bind ipx pri_802.2 net=2 bind ipx pri_802.3 net=3 bind ipx pri_snap net=5 bind ipx pri_ii net=11 ;- Set the 2nd adapter to be an Adapter Fault Tolerance ;- partner to the first adapter aft bind 7 8 ;- Note: No protocols should be bound to the secondary ;- adapter. All protocol bindings to the primary adapter ;- will be transferred to the secondary if the primary link ;- fails. ;- ********************************************************* ;- v1.01Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.