Windows* 2000 Push Install Instructions - Introduction - Setting up an install directory on the file server - Instructions for Creating Teams (Optional) - Deployment methods - Microsoft documentation for unattended installations of Windows 2000 - Sample unattend.txt file for Windows 2000 - Directory structure for unattended installation files -------------------------------------------------------------------------------- Introduction A "Push", or unattended installation of Windows 2000 provides a means for network administrators to easily install Windows 2000 on similarly equipped systems. The network administrator can create a bootable diskette that automatically logs into a central server and installs the operating system from an image of the Windows 2000 installation directory stored on that server. This document provides instructions for a basic unattended installation of Windows 2000 that includes the installation of drivers for the Intel(R) PRO/100 and Intel(R) PRO/1000 adapters. As part of the unattended installation, you can create teams. If you wish to create one or more teams as part of the unattended installation, you must also follow the instructions denoted in this page as "Instructions for Creating Teams (Optional)". The elements necessary for the Windows 2000 unattended installation are: - A Windows 2000 Server with a shared image of the \I386 directory from the Windows 2000 installation CD. - If you want to create teams as part of the unattended installation, you need to create a configuration file with the team information in it. To create this file, you need a sample system that has the same type of adapters that will be in the systems receiving the push installation. On the sample system, use Intel(R) PROSet to set up the adapters in the teaming configuration you want. This system could also be the Windows 2000 Server mentioned above. For clarity, this system is referred to in this page as the configured system. - An unattended installation configuration file that provides Windows 2000 setup with information it needs to complete the installation. The name of this file is UNATTEND.TXT. A DOS boot diskette that contains Microsoft Network Client software for connecting to the Windows 2000 server and AutoExec commands to automatically start the Windows 2000 installation. ------------------------------------------------------------------------------- Setting up an install directory on the file server The server must be setup with a distribution folder that holds the required Windows 2000 files and which clients can reach when connecting via TCP/IP or IPX. For illustration purposes, the examples on this page use the network share D:\PUSH2K. To create this share, 1) Create a directory on the server, (EX: D:\PUSH2K) and create an I386 directory beneath it. 2) Use the My Computer applet in Windows 2000 to locate the D:\PUSH2K folder. 3) Right-click the folder and select Sharing. 4) Select Share this folder. Give it a share name (EX: PUSH2K). This share name will be used to connect to this directory from the remote target systems. 5) By default, the permissions for this share will be for Everyone to have Full Control. 5) Adjust permissions as necessary and click OK. To prepare the distribution folder: 1) Copy the \I386 folder from the Windows 2000 CD to D:\PUSH2K. Use Windows Explorer or XCOPY to maintain the same directory structure as on the Windows 2000 CD. When the copy is complete, the Windows 2000 installation files should be in the D:\PUSH2K\I386 directory. 2) Copy Unattend.txt from the Intel CD (found in \APPS\SETUP\PUSH\WIN2K) into the shared directory D:\PUSH2K\I386. 3) Edit the Unattend.txt file with Notepad or another text-editor to include your customizations. At a minimum you should change the items in the [UserData] section of the file. For server installations the [LicenseFilePrintData] section should be used to specify the server type and number of users (for PerServer type). 4) Create the driver install directory structure and copy the driver files to it. NOTE: The PUSHCOPY.BAT file provided with the drivers in the \APPS/SETUP\PUSH directory copies the appropriate files for the installation. PUSHCOPY also copies the components needed to perform the automated installations contained in the [GuiRunOnce] section of the sample UNATTEND.TXT file. These include an unattended installation of the Intel PROSet configuration and diagnostic utility. Example: From a Windows 2000 command prompt where e: is the drive letter of the CD-ROM drive: e: cd \APPS\SETUP\PUSH (you must be in the \APPS\SETUP\PUSH\ directory to run PUSHCOPY) pushcopy D:\PUSH2K\I386 w2k The above command creates the $OEM$ directory structure and copies all the necessary files to install the driver and Intel PROSet. However, Intel PROSet is not installed unless the line: ; Command0="c:\drivers\net\Intel\Proset.msi/qn" is uncommented from unattend.txt. As an alternative to using the PUSHCOPY.BAT file method the following steps can be used to create the required directory structure for unattended installation of the Intel PRO/1000 and Intel PRO/100 drivers. Note that this method does not copy the files specified in the [GuiRunOnce] section of the sample UNATTEND.TXT. If this method is used, the entries in this section should be commented out. Make folders beneath the new \i386 as follows: \$OEM$\$$\System32 \$OEM$\$1\Drivers\Net\Intel From the files provided with the Intel adapter run (from the makedisk directory): "makedisk w2k Z:\PUSH2K\i386\$OEM$\$1\Drivers\Net\Intel" Alternative: run "makedisk\makedisk w2k a:" where a: is the floppy and then copy the contents of the floppy into Z:\PUSH2K\i386\$OEM$\$1\Drivers\Net\Intel. Use Xcopy /s or Windows Explorer to maintain the proper directory structure. See the "Directory structure for unattended installation files" section of this document for more information about the directory structure and file layout of the $OEM$ directory. ------------------------------------------------------------------------------- Instructions for Creating Teams (Optional) 1) Copy SavRes.vbs from the Intel CD to the configured system. The file is located in the APPS\WMI\ directory on the Intel CD. 2) Open a command prompt on the configured system and navigate to the directory containing SavRes.vbs. 3) Run the following command: cscript SavRes.vbs save. A configuration file called WmiConf.txt is created in the same directory. 4) On the Windows 2000 Server, create a directory in the $OEM$\$1 directory called WMIScrpt. For example, on Windows 2000, the directory is $OEM$\$1\WMIScrpt. 5) Copy the SavRes.vbs and WmiConf.txt files to the WMIScrpt directory. 6) Copy the Restore.bat batch file to the $OEM$\$1\WMIScrpt directory. The file is located in the APPS\SETUP\PUSH\WIN2K directory on the Intel CD. 7) Edit the GUIRunOnce section in the unattend.txt file in the following way. After the command to install Intel PROSet and the drivers, add the following command: Command1="c:\wmiscrpt\restore.bat" -------------------------------------------------------------------------------- Deployment Methods Make sure that you have a copy of a network bootable MS-DOS floppy that will connect to the Z:\PUSH2K directory, use it to boot the destination system (the one you want to push install to), and connect to this shared network directory. Run the command at the \\Server\PUSH2K\i386 prompt: winnt /u:Z:\I386\unattend.txt /s:Z:\I386 /t:c where Z: equals mapped drive. If you installed teams as part of the unattended installation, view the results of the script execution in the output.txt file. This file is in the same directory as the SavRes.vbs file. NOTE: In the above procedure, setup runs the installation in unattended mode and also detects the plug and play network adapters. All driver files are copied from the shared directory to the target system directories and installation of the OS and Network Adapters continues without user intervention. -------------------------------------------------------------------------------- Microsoft documentation for unattended installations of Windows 2000 For a complete description of the parameters supported in Unattend.txt see the UNATTEND.DOC document in the DEPLOY.CAB cabinet file on the Windows 2000 CD. To obtain the document, use Internet Explorer 5.0 or greater to open DEPLOY.CAB in the \SUPPORT\TOOLS directory on the Intel CD. For deployment suggestions using a Windows 2000 RIS server and PXE boot see the Boot Agent User's Guide. To configure and install the driver set on the RIS Server see the knowledge base article Q246184 on Microsoft's support site at: http://support.microsoft.com/support/kb/articles/Q246/1/84.ASP?LN= EN-US&SD=gn&FR=0 General information on how to preinstall an OEM driver set for Windows 2000 can be found in knowledge base article Q254078: http://support.microsoft.com/support/kb/articles/q254/0/78.asp?LN= EN-US&SD=gn&FR=0 -------------------------------------------------------------------------------- Sample Unattend.txt file for Windows* 2000 [Unattended] UnattendMode=FullUnattended OemSkipEula=Yes OemPreinstall=Yes OemPnPDriversPath=\drivers\net\INTEL TargetPath=\WINNT DriverSigningPolicy=Ignore Filesystem=LeaveAlone OverwriteOemFilesOnUpgrade=No [GuiUnattended] AdminPassword=* AutoLogon=Yes AutoLogonCount=1 OEMSkipRegional=1 TimeZone=4 OemSkipWelcome=1 ; At a minimum you should update the [UserData] section. [UserData] FullName=Name OrgName=Organization ComputerName=ComputerName ProductID=xxxxx-xxxxx-xxxxx-xxxxx-xxxxx [GuiRunOnce] ; command to install PROSet - uncomment to install PROSet after push install ; Command0="c:\drivers\net\INTEL\Proset.msi /qn" [Identification] JoinWorkgroup=WORKGROUP ; Use the following for a domain installation ; JoinDomain-MYDOMAIN ; CreateComputerAccountInDomain=Yes ; DomainAdmin=Installer [Networking] InstallDefaultComponents=Yes -------------------------------------------------------------------------------- Directory structure for unattended installation files The following directory structure is created by PUSHCOPY.BAT to place the files necessary for the installation of the driver and PROSet. The directory D:\PUSH2K refers to the location of the files from the \I386 directory on the Windows 2000 installation CD. \$oem$\$$\system32 \$oem$\$1\drivers\net\INTEL (From the \PRO100\WIN2K directory of the Intel CD) E100BNT5.INF E100BNT5.DIN E100BNT5.SYS E100BNT5.CAT E100BMSG.DLL INTELNIC.DLL PROUNSTL.EXE (From the \PRO1000\WIN2K directory of the Intel CD) e101dnt5.Inf E1000NT5.INF E1000NT5.DIN E1000NT5.SYS E1000NT5.CAT E1000MSG.DLL (From the \APPS\SETUP\PUSH\WIN2K directory of the Intel CD) UNATTEND.TXT PUSHW2K.TXT (From the \APPS\PROSET\WIN2K directory of the Intel CD) ANSPW2K.INF ANSMW2K.INF IANSMSG.DLL IANSW2K.SYS IANSW2K.CAT PROSET.MSI S8023DEV.REG *.MST ; International language files ; To activate the PROSet installation once the above directories have ; been created and populated, uncomment the line: ; Command0="c:\drivers\net\INTEL\Proset.msi /qn" ; in the [GuiRunOnce] section of Unattend.txtDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.