1. 7045_THBDAv1.0.6.3_WHQL.zip Driver
2. ReleaseNote.txt File Contents

ReleaseNote.txt Driver File Contents (7045_THBDAv1.0.6.3_WHQL.zip)

Twinhan BDA driver for VP7045/VP7046 DVB-T  v1.0.6.3

1. Driver installation,
   You may install 7045 BDA driver with either UDTT2BDA.inf or UDTT2BDA_HID.inf.
   UDTT2BDA.inf ("Twinhan USB2 DVB-T BDA adapter") does not support remote controller HID driver, while
   UDTT2BDA_HID.inf ("Twinhan USB2 DVB-T BDA adapter with HID Driver") supports.

2.Various INF files in folder \INF
   For differnet applications, please install with the corresponding INF files.

   2.1. For MCE2005 in Australia, please install with "UDTT2BDA_MCE_AU.inf".
   2.2. For MCE2005 in UK(VHF/UHF:8MHz, like UK), please install with "UDTT2BDA_MCE_UK.inf".
   2.3. For MCE2005 in Europe(VHF:7/UHF:8MHz, like Germany), please install with "UDTT2BDA_MCE_EU.inf".
   2.4. For MCE2005 in Taiwan, please install with "UDTT2BDA_MCE_TW.inf".
   2.5. For non-MCE but BDA based application, like ShowShift, please install with "UDTT2BDA.inf".

   By default, the above INF files do not support remote controller HID driver .   
   For each INF file, there is a corresonding one INF (named as XXXXXXXX_HID) with HID support.

3.THBDAConsole.EXE
   A BDA utility (THBDAConsole.exe) is included. With this utility, users may change the BDA default settings after
   driver installed. 

   Usage for THBDAConsole.exe:
   If THBDAConsole.exe is launched with the parameter -S, it's started in minimized mode on the task bar.

   For Windows MediaCenter (MCE2005) DVB-T users,
      If the option "Auto setting by country (for MCE)" is enabled, the driver settings will be changed for 
      MCE2005 accroding to the location of Windows XP installation.
      The location setting can be changed in "Control Panel" -> "Regional & Language options" -> "Location". 
      To enable this option, users should make sure if the location is set correctly.
   Note:By default, the option "Auto setting by country (for MCE)" is enabled.

      The option "ShiftFreqScan" determines if off center frequency scan(+-167KHz) will be done or not in MCE2005.
      For each DVB-T channel MUX, MCE will scan triple times, the central frequency F, F-167Khz, then  F+167Khz.
      Our tuner's frequncy range tolerance is larger than +-167KHz, so there will be triple programs found.
      Disabling this option can improve channel scan speed and eliminate the duplicated programs found.

   For non-MCE BDA applications, like Showshifter, PowerCinema 4, WinDVR6...,
      The option "Auto setting by country (for MCE)" "MUST" be un-checked.
      Two other options "MCE_FreqTranslate" & "FixedBandwidth" "MUST" be set to "None".


4. Regarding Remote Controller HID driver,
   There are 5 RC mapping tables supported.
   You may set the default mapping by changing the value of "RC_Configuration" in UDTT2HID.INF before driver
   installation.
      "RC_Configuration"=0, RC table for Twinhan
      "RC_Configuration"=1, RC table for Cyberlink PCM4
      "RC_Configuration"=2, RC table for IVI
      "RC_Configuration"=3, RC table for MCE
      "RC_Configuration"=4, RC table for Twinhan new HID RC

   After driver install, you may change the mapping with ThBDAConsole.exe, but the USB box should be unplugged and 
   pluged for the new mapping to take effect.

5. 64 bit driver
  AMD64 & IA64 driver binary is included in this package, bit it's not well tested yet.
================================================================================================
Revision History
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.6.3
1. Fix issue: System crash when Win2000 install driver.
2. Modify HID driver for MCE application.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.6.2
1. Fix issue: Driver fail to init when update driver from device manager.
2. HID issue: Reduce HID driver installation process.
   Add registry key "RC_Report" in UDTT2HID.inf
   ;0:Twinhan Hotkey table only, 1:All RC table
3. Modify (Merge) HID INF fiiles.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.6.1
1. Fix issue: System crash when install driver.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.6.0
1. Add MCE remote control device support. 
   To support MCE RC, please set the following registry keys in UDTT2BDA_HID.INF,
	; //IR Stanard (NEC:0x01, RC-6:0x04)
	HKR,"DriverData","IR_Standard",0x00010001, 0x04,0x00,0x00,0x00
	; //IR system code checklist1 (NEC:0x00FF, MCE:0x0004)
	HKR,"DriverData","IRSYSCODECHECK1",0x00010001, 0x04,0x00,0x00,0x00
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.5.9
1. Fix issue: THDTV can't get driver information when filter is in the running state.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.5.8
1. Fix MT353 issue: Update tuner control code with new Samsung latest sample code.
2. Fix MT353 issue: Modify signal quality presentation.
3. Modify device plug/unplug event only on the second driver loading time.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.5.7
1. Fix MT353 issue: Add more time to check locked status when frequnecy is shift +-125.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.5.6
1. Fix MT353 issue: Device #2 can't playback when THDTV3.0 first startup.
2. Fix MT353 issue: Can't lock non-integral frequency.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.5.5
1. Fix THDTV sometimes playback fail issue by modify PH10046 lock function.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.5.4
1. Add new THBDACmd32 for x64
2. Modify PH10046 checking lock status function.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.5.3
1. Fix tuner power control bug that will cause fail to lock at first time.
2. Update HID driver to 1.0.1.2 (Ctrl+'n' for Play)
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.5.2
1. Support Samsung PH10046 channel decoder
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.5.1
1. Fix HCT test fail issue
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.5.0
1. Modify THBDACMD structure to support THBDA_Ioctl under x64 platform.
2. Fix HID driver failure under x64 platform.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.4.9
1.HID driver update to V1.0.1.1.
2.Add THBDA_IOCTL_SET_HID_RC_CONFIG and THBDA_IOCTL_GET_HID_RC_CONFIG.
3.Fix HID can't access multi_devices issue.
4.Remove RC_Configuration from UDTT2HID.inf to UDTT2BDA.inf
5.Modify RC_Configuration setting by AP from HID driver to BDA driver
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.4.8
1.HID driver update to V1.0.1.0.
2.Update HID to support IOCTL for RC_Configuration setting.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.4.7
1.Fix MyTheatre can not play bug.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.4.6
1."SupportHWInfo" & "Device_Name" Import from Registry key.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.4.5
1.Rename "VP" to "UDTT" on INF,Firmware.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.4.4
1.TwinhanDTV 2.607 Test OK!
2.TS Read routine buffer modified!
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.4.3
1. Combine INF to only one INF.
2. Remove Firmware "Twinhan" Vendor string!
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.4.2
1. Add MT353 code in Firmware & Driver to support MT353.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.4.1
1. Fix the issue: System will crash when play HDTV with DNTV or Intervideo decoder.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.4.0
1. Fix the issue: THDTV2.61 can't play when channel lock fails,  but signal is back later.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.3.9
1. Fix the issue: System will crash when install more than one HID driver.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.3.8
1. For 7045HID WHQL testing
2. Add replay/skip key support for Twinhan RC ("RC_Configuration"=0).
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.3.7
1. Add Shift_Frequency +/-125 KHz
2. Multiple instances access control
3. Add IR system code control 
4. Add Custom defined virtual key for HID
5. Support firmware on EEPROM
6. Filter name changed to "DTV-DVB USB2 DVB-T receiver"
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.3.6
1. Improve R/C key receiving behavior
General key receive time    < 0.3 sec
Repeated key receive time < 0.3 sec
Second repeated key recive time: 1 sec
Large second repeated key recive time < 0.3 sec
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.3.5
1.Fix firmware bug: TUNER_SIGNAL_READ_2 return error
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.3.4
1.Modify firmware with adding serial number
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.3.3
1.Name changed
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.3.2
1.Use only one ProductID (Fireware doesn't increase one)
2.Update Fireware 1.0.1.0: Fix tuner sometimes will be unlock in France.

7045 HID Feature:
1. Add DNTVLive RC mapping table
2. Update Cyberlink RC mapping table
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.3.0
1.System crash when THDTV play -> stop -> unplug device.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.2.9
1.Remove PID filter, support MCE2005 beta02
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.2.8
1.RC repeat key support
2.Adjust Signal quality index 
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.2.7
Fix Running Setup to remove or install system crash.
 =>IoRegisterDeviceInterface are done for both ID 3205 and 3206.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.2.6
1. Fix bug: System crash when closing THDTV and unplug device at the same time.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.2.5
1. Register with GUID {9D835C9C-F025-44ac-90BA-BC5379264442}
2. Fix bug: Do_THBDA_IOCTL_GET_REMOTE_CONTROL_VALUE return value
3. Fix the lock status check for locking the same frequency
4. New Twinhan HID RC support (type:4).
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.2.3
1.Increase tuner power on delay to 1 second.
2.XP WHQL certified
3.Trial build driver binary for AMD64 & IA64.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.2.2
Fix bug: System crash when THDTV Play -> Stop -> unplug device
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.2.1
1. Fix bug: Some devices can't play when restart THDTV again.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.2.0
1. Modify THBDA_IOCTL_SET_TUNER_POWER: wait time
2. Fix Win2K support bug
3. Add THBDA_IOCTL_HID_RC_ENABLE
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.1.9
1. THBDA IOCTL USB bus speed
#define Device_Speed_PCI                    0xff
#define Device_Speed_LOW                    0   //USB 1.1 low
#define Device_Speed_FULL                   1   //USB 1.1 full
#define Device_Speed_HIGH                   2   //USB 2.0 high
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.1.8
BDA driver Feature
1. Fireware version updated to v1.07
2. USBD verder request command function modified
3. Tuner power policy,
   When driver loaded, tuner power is off.
   When the first channel lock is requested,  tuner power is turned on.
   When application is stopped, tuner is put in software sleep mode.
   When application is started again, tuner is waked up from sleep mode. (This will take almost zero time)
   When system suspends (S1/S2/S3/S4), tuner power is turned off. 
   When system wakes up to S0, tuner power will be restored to previous state.
4. Driver can't be reload when doing the folling steps 
   "start PCM4 -> play TV without signal -> close PCM4 -> unplug device -> plugin device" 
Remote controller HID driver v1.01
1. Support Cyberlink PCM4
2. Support MS MediaCenter 
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0.1.7
1. Support Remote controller for Twinhan, Cyberlink, IVI's applications.
2. Tuner Power control policy,
   When driver loaded, tuner power is off.
   When the first channel lock is requested,  tuner power is turned on.
   When application is stopped, tuner is put in software sleep mode.
   When application is started again, tuner is waked up from sleep mode.
   When system suspends (S1/S2/S3/S4), tuner power is turned off.
   When system wakes up to S0, tuner power will be restored to previous state.
 --------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0 beta16
1. Fix device reset failure with OEM's device ID's.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0 beta15
1. Update fireware version 1.06 for OEM's device ID's.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0 beta14
Bugs fixed and new features,
1. Fix the bug: System crashes when play program directly without scanning program first.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0 beta13
Bugs fixed and new features,
1. In some Platform, install or update driver will crash system.
2. Update INF file version num.
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0 beta12
Bugs fixed and new features,
1. Some device may failed to capture TS when tthe tuner is turned off and on.
2. Modify Get_Signal_Mapping() (use the same mapping as THDTV)
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0 beta11
Bugs fixed and new features,
1. Speed up the bulk transfer
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0 beta10
Bugs fixed and new features,
1. Fix band bandwidth to 7MHz or 8 MHz when it's not properly set 
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0 beta09
Bugs fixed and new features,
1. Speed up Bulk_Transfer by modify thread priority and BULK_TRANS_BUF_SIZE.
2. Modfiy registry rule for "MCE_FreqTranslate" and "FixedBandwidth".
3. Mofity directx component registry for PCM4 (Add "BDA Receive Component")
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0 beta08
Bugs fixed and new features,
1. Increase lock status check delay (from 100ms to 300 ms)
2. Ddebug message for lock status
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0 beta06
Bugs fixed and new features,
1. ADD IOCTL access
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0 beta05
Bugs fixed and new features,
1.       Remove component from ¡§BDA receiver component¡¨
2.       Add ¡§Signal Strength¡¨ query information
3.       Enlarge the BULK_TRANS_BUF_SIZE from 10240 to 81920
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0 beta04
Bugs fixed,
1.       Modify INF & Driver for HCT test
2.       Fix HCT test failure
3.       Improve scan speed (scan 14 programs, only need 115 seconds)
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0 beta03
Bugs fixed,
1. Fix ShowShift can¡¦t playback bug
--------------------------------------------------------
Twinhan BDA driver for VP7045/VP7046 DVB-T  v 1.0 beta02
Bugs fixed,
1. Power control failure in firmware
================================================================================================
Known issues with MCE2005
1. MCE2005 DVB does not support AC3 audio. (only ATSC AC3 is supported)
2. The HDTV display supoorts up to 1280x768 only, (many HD programs are up
to 1920x1080i or 1440x1080i)
3. MCE2005 does not include any MPEG2 decoder, so you should install a MPEG2
   decoder first, either IVI, Cyberlink, Elecard, or NvDVD.
4. Not all VGA cards can support MCE2005 well, the only VGA card we test ok
   is Nvidea GeForce4 MX440 & MX4000.
5. Please be sure to install Audio driver well before running MCE.
6. Known bug: Uner WinXP-SP1, update driver will crash system.