UM9800 V.90 USB Modem v4.00 Drivers 301000
=================================== ======
Section A: Important notice
Section B: Installation/Uninstallation of USB modem drivers
on Windows 98 and Windows Millennium platforms
Section C: Installation/Uninstallation of USB modem drivers
on Windows 2000 platform
Section D: How to change the modem Country Profile
Section E: Technical Support
-------------------------------------------------------------------------------------------------
Section A:
Important notice
================
1. Please install UM9800 V.90 USB modem drivers only in
Windows 98.
For Windows 2000 user, UM9800 V.90 USB modem v4.00 driver come
with Win2k driver.
2. For UM9800 V.90 USB modem, Speakerphone function is not
supported by this modem. However, Telephone Answering
Machine is supported.
3. DOS-Box games is not supported as USB Driver is using
Virtual COM Ports which is not allocated any IRQ or
Address.
4. As there is still no voice support available for UM9800 modem under
Windows 2000,in BVRP Phonetools application, user must first disable
the Answering Machine function in order to receive fax. To do this
> Go to,
Voice Mail Tab located at the front panel of the Phonetool application
and choose > Answering Machine Off.
5. Modem Diagnostic under the installation wizard can only work in Windows
98/98se.
6. Windows Millennium Driver is included in this volumne of CD. The
installation procedure is similar to that used in Windows 98 section.
As the document was not updated as the released of this WinMe driver.
Please follow the procedure recorded in Windows 98 for installing the
USB modem.
-------------------------------------------------------------------------------------------------
Section B:
Installation of USB modem drivers on Windows 98/Millennium platforms
====================================================================
1. Before powering on your Computer, connect the UM9800 V.90
USB Modem to the USB port of your Computer with a USB Cable.
2. Power on your Computer.
3. Windows 98/Me will automatically detect the USB modem.
Click 'Next' to continue.
4. Insert the installation CD provided into the CD-ROM Drive.
5. Select 'Search for the best drivers for your device.
(Recommended)' and click 'Next' to continue.
6. Enable 'Specify a location' selection and click 'Next' to continue.
In the text box, type "D:\Win98" assuming your CD-ROM is D.
7. Modem Driver will be found on the installation CD. Click
'Next' to continue.
8. Click 'Finish' to complete modem installation.
9. System will then automatically load all the necessary
drivers and files needed.
10. A "UM9800 Modem Information" Folder will be created at your
Windows 98 Start Menu, Programs Folder. You will find useful
informations and Utilities for this Modem in this folder.
11. Installation is completed.
Uninstallation your UM9800 USB Modem
====================================
1. Un-plugged the USB Modem and USB Cable from your Computer.
2. Then go to 'Add/Remove Programs' inside the 'Control Panel' to remove
"UM9800 V.90 USB Modem".
3. Modem is Uninstalled.
Alternatively,
1. Click "Deinstall Modem" in the "UM9800 Modem Information" Folder.
2. Click the "Next" button to start Uninstalling.
3. Click the "Finish" to complete Uninstalling.
4. Modem is Uninstalled.
-------------------------------------------------------------------------------------------------
Section C:
Installation of USB modem drivers on Windows 2000 platform
=========================================================
1. Before powering on your Computer, connect the UM9800 V.90
USB Modem to the USB port of your Computer with a USB Cable.
2. Power on your Computer.
3. Windows 2000 will automatically detect the USB modem.
Click 'Next' to continue.
4. Insert the installation CD provided into the CD-ROM Drive.
5. Select 'Search for the best drivers for your device.
(Recommended)' and click 'Next' to continue.
6. Enable 'Specify a location' selection and click 'Next' to continue.
In the text box, type "D:\Win2k" assuming your CD-ROM is D.
7. Modem Driver will be found on the installation CD. Click
'Next' to continue.
8. Click 'Finish' to complete modem installation.
9. System will then automatically load all the necessary
drivers and files needed.
10. Please click 'Continue' at the Microsoft signature
prompting.
11. Installation is completed.
Uninstallation your UM9800 USB Modem Win 2000 driver
====================================================
1. Un-plugged the USB Modem and USB Cable from your Computer.
2. Then go to 'Add/Remove Programs' inside the 'Control Panel' to remove
"UM9800 V.90 USB Modem".
3. A confirmation window appears. Click "OK" to proceed.
4. Select the Control Panel - System Properties - Device Manager - Modems properties.
5. Select the "uninstall Modem", this will fully remove all the modem related driver.
6. Modem is Uninstalled.
------------------------------------------------------------------------------------------
Section D:
How to change the modem country profile
=======================================
For better modem performance, please set the country profile
to the country where you are in. If the country profile is not
already set to the country where you are in, please do the
following :
Go to Control Panel => System => Device Manager. Double click on
on 'Modem'. Double click on 'UM9800 V.90 USB Modem'. Click on
'Configuration'. Choose the country where you are in and
click 'OK'.
-------------------------------------------------------------------------------------------------
Section E:
Technical Support
=================
***********************************************************
* In case you encounter any problem with our products, *
* please quote the following model(s) when calling our *
* Technical Support : *
* UM9800 V.90 USB Modem *
***********************************************************
------- The End ---------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.