Windows BIOS flash for Xplore Technologies iX104C2 Tablet PC
LEVEL : MP3
SYSTEM LIST : Wildcat2
VERSION : R01-A1P (KBC: 121305-01H)
-- How to Flash BIOS:
==>Flash BIOS by Windows Utility: Wflash
1. Extract the ZIP file to HDD C:\BIOS
2. Boot to Windows XP or Windows 2K.
3. Execute C:\bios\Wflash\wt2a1P.exe
4. Following the "WFlash Warning" Message to close all other application
and then Press "OK" to start flash bios procedures.
5. After flash successful, the system will auto-shutdown.
-- How to over install:
It is the same as clean install.
-- How to check version:
1. Press F2 enter to BIOS setup screen while system POST.
2. Select System Information and see System BIOS version.
-- Special notes or Restrictions/Cautions:
None.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.