1. v23.zip Driver
2. WIN.txt File Contents

WIN.txt Driver File Contents (v23.zip)

**
**
**  VIA Networking Velocity Family Gigabit Ethernet Adapter
**
**  NDIS Driver for Windows 95/95OSR2/98/98SE/ME/2000/XP, Server 2003
**
**  v1.39   Feb, 2005
**
**

Introduction:
=============

  This document shows you how to setup the driver in Windows operating system.

Contents of the Subdirectory:
=============================
    
    GETND5AV.SYS        The NDIS5 driver for Windows 98/98SE/ME.
    GETND5BV.SYS        The NDIS5 driver for Windows 2000/XP, Server 2003.
    GETND4.SYS          The NDIS4 driver for Windows 95OSR2.
    GETND3.SYS          The NDIS3 driver for Windows 95.
    GETNDIS.INF         The installation information file.
    WNDI.DLL            The Co-installer for Windows.
    VUINS16.DLL         The Un-installer for Windows.
    VUINS32.DLL         The Un-installer for Windows NT.
    WIN.TXT             This file.

Installation:
=============

  Before starting with the installation process, make sure that the adapter
  is properly installed and configured.

    1. Turn on the power of your PC on to boot from Windows operating system.
       Windows will auto-detect your new adapter, and the "New Hardware Found"
       dialogue box will appear. Select "Driver from disk provided by hardware
       manufacturer" to install driver from the diskette that comes with your
       LAN adapter.

    2. Insert the driver diskette into your floppy drive, and specify the
       path of the driver in the diskette(i.e. A:\) to copy the driver
       files to your system.

    3. When the driver installation is completed, restart Windows if needed.

  Note:

    1. On some machines, it is possible that some NICs fail to initialize.
       This might be caused by insufficient memory. Users can try to decrease
       Tx or Rx buffer number to solve this problem.

    2. The Flow Control setting "Hardware Default (Auto)" means the flow control
       ability depends on the auto-negotiation result with the link partner.
       In other settings ("Enable Tx", "Enable Rx", "Enable Tx/Rx"), driver will
       set the Tx or Rx flow control ability without auto-negotiation.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.