<================================================================> < SMC Networks, Inc. > < SMC EZ Card 10/100 (SMC1255TX) > < SOFTWARE DRIVER SUPPORT > < > < Copyright 2001 SMC Networks, Inc. > < All Rights Reserved. > < > <================================================================> FOR LINUX KERNEL 2.2 ====================== The readme file contains the following information for SMC EZ Card 10/100 (SMC1255TX) adapter Linux driver installation. A. Rebuild the SMC1255TX Linux driver B. Driver installation A. Rebuild the SMC1255TX Linux driver ====================================== 1. Copy the source code to a temporary directory, for example /tmp, #cp tulip.c /tmp 2. Rebuild the driver using the following command, #cd /tmp -- for single-processor system, #gcc -DMODVERSIONS -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c tulip.c -- for symmetric-multi-processor system, #gcc -DMODVERSIONS -D__SMP__ -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c tulip.c 3. Now, you have the new driver object code in the /tmp directory. You can go to section B, to install the new driver. B. Driver Installation ====================== 1. Copy the driver object code to net modules directory, #cp -f /tmp/tulip.o /lib/modules/2.2.XX/net where the 2.2.XX is the Linux kernel version,be careful to type the proper path. 2. Load the driver by #insmod tulip.o 3. Config your network with #netconfig or #ifconfig eth0 xxx.xxx.xxx.xxx where xxx is your IP All trademarks or brand names mentioned are properties of their respective companies. --- End of File ---Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.