readme.txt Driver File Contents (

(1)BootROM types(Monolithic PXE ROM)
    pxe_m.18  -- Hook Int18
    pxe_m.19  -- Hook Int19
    pxe_m.bev -- Use BEV

(2)How to test PXE ?

   1.Environment Request:
     -You should install NT server(4.0 SP3 or later)
     -Install TCP/IP and Assign a static IP for server
     -Ensure the GUEST account is enabled
     -Get PDK from Intel web site.

   2.Setup DHCP Server:
     -Add DHCP service on NETWORK PANEL
     -Start->Programs->Administrative Tools->DHCP Manager to create a range of scope

   3.If PXE service and DHCP server installed on the same machine, you MUST add this tag to your server.
     -Choose DHCP Options->Default to setting

   4.Choose NEW PXE Option Tag

   5.Assign Option 60 to Global

   6.Create the boot files: APITEST.1 and DOSUNDI.1
     -Create two 1.44 DOS format boot disk.
     -Disk1=>Label APITEST
      Copy HIMEM.SYS, RAMDRIVE.SYS, MORE.COM, and FC.COM into disk1.
     -Disk2=>Label DOSUNDI
      Copy MORE.COM into disk2
     -Change to \\PDK\system\images\x86pc\undi\APITest and run "mktest.bat"

     [Note]When system is installing, it will point the directory of NT CD,
      you should point to "root". If you point to "\i386", system will
      CANNOT find files.

     -Change to \\PDK\system\images\x86pc\undi\DOSUNDI and run "mkdos.bat"

   7.Config proxy DHCP Server

   8.Add Bootserver List

   9.Add type 3 and 65535

   PS. For the details of PXE setting in NT server,
       please refer to the PDK and SDK of PXE in Intel web site.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.65