1. aDIO_windows_v2.00.00.zip Driver
2. aDIO.inf File Contents

aDIO.inf Driver File Contents (aDIO_windows_v2.00.00.zip)

# 'aDIO.inf' file for the RTD aDIO driver

[Version]
Signature="$WINDOWS NT$"
Class=RTD cpuModules
ClassGUID={B2A369C9-CBD9-40e3-8A22-66266FF0D617}
Provider=%Provider%
DriverVer=11/03/2006,2.0.0.14072

[ControlFlags]
ExcludeFromSelect=ACPI\RTD_aDIO, ACPI\RTD_BRG_aDIO 


[DestinationDirs]
DefaultDestDir = 10,System32\Drivers
aDIO_Device_CoInstaller_CopyFiles = 11

; ================= Class section =====================

[ClassInstall32]
Addreg=aDIO_ClassReg


[aDIO_ClassReg]
HKR,,,0,%ClassName%
HKR,,Icon,,-5
HKR,,DeviceCharacteristics,0x10001,0x100     ;Use same security checks on relative opens
HKR,,Security,,"D:P(A;;GA;;;SY)(A;;GA;;;BA)" ;Allow generic all access to system and built-in Admin.
                                             ;This one overrides the security set by the driver


;*****************************************
; aDIO Device  Install Section
;*****************************************

[Manufacturer]
%MfgName%=Standard,NTx86

; For Win2K
[Standard]
; DisplayName                   Section           DeviceId
; -----------                   -------           --------
%aDIODevice.DeviceDesc%=aDIO_Device, aDIO
%aDIODevice886.DeviceDesc%=aDIO_Device886, ACPI\RTD_aDIO
%aDIODeviceBRG.DeviceDesc%=aDIO_DeviceBRG, ACPI\RTD_BRG_aDIO

; For XP and later
[Standard.NTx86]
%aDIODevice.DeviceDesc%=aDIO_Device, aDIO
%aDIODevice886.DeviceDesc%=aDIO_Device886, ACPI\RTD_aDIO
%aDIODeviceBRG.DeviceDesc%=aDIO_DeviceBRG, ACPI\RTD_BRG_aDIO


[aDIO_Device.NT]
CopyFiles=aDIO_Device.NT.Copy
LogConfig=aDIO_Config

[aDIO_Device.NT.Copy]
aDIO.sys


[aDIO_Device886.NT]
CopyFiles=aDIO_Device886.NT.Copy

[aDIO_Device886.NT.Copy]
aDIO.sys


[aDIO_DeviceBRG.NT]
CopyFiles=aDIO_DeviceBRG.NT.Copy

[aDIO_DeviceBRG.NT.Copy]
aDIO.sys


;-------------- Service installation

[aDIO_Device.NT.Services]
AddService = aDIO, %SPSVCINST_ASSOCSERVICE%, aDIO_Service_Inst

[aDIO_Device886.NT.Services]
AddService = aDIO, %SPSVCINST_ASSOCSERVICE%, aDIO_Service_Inst

[aDIO_DeviceBRG.NT.Services]
AddService = aDIO, %SPSVCINST_ASSOCSERVICE%, aDIO_Service_Inst

[aDIO_Service_Inst]
DisplayName    = %aDIO.SVCDESC%
ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
StartType      = 3               ; SERVICE_DEMAND_START
ErrorControl   = 1               ; SERVICE_ERROR_NORMAL
ServiceBinary  = %10%\System32\Drivers\aDIO.sys
LoadOrderGroup = Extended Base


[SourceDisksNames]
1 = %DiskId1%,,,""

[SourceDisksFiles]
aDIO.sys  = 1,,


;------- Logical Configuration --------
[aDIO_Config]
ConfigPriority=HARDRECONFIG
;I/O Registers
IOConfig=300-303(FFFF::),310-313(FFFF::),340-343(FFFF::),350-353(FFFF::),400-403(FFFF::),410-413(FFFF::),440-443(FFFF::),450-453(FFFF::)
; Interrupt
IRQConfig=5,7,10,11,12

;
;--- WDF Coinstaller installation ------
;
[aDIO_Device.NT.CoInstallers]
AddReg=aDIO_Device_CoInstaller_AddReg
CopyFiles=aDIO_Device_CoInstaller_CopyFiles

[aDIO_Device886.NT.CoInstallers]
AddReg=aDIO_Device_CoInstaller_AddReg
CopyFiles=aDIO_Device_CoInstaller_CopyFiles

[aDIO_DeviceBRG.NT.CoInstallers]
AddReg=aDIO_Device_CoInstaller_AddReg
CopyFiles=aDIO_Device_CoInstaller_CopyFiles

[aDIO_Device_CoInstaller_AddReg]
HKR,,CoInstallers32,0x00010000, "wdfcoinstaller01001.dll,WdfCoInstaller"

[aDIO_Device_CoInstaller_CopyFiles]
wdfcoinstaller01001.dll

[SourceDisksFiles]
wdfcoinstaller01001.dll=1 ; make sure the number matches with SourceDisksNames

[aDIO_Device.NT.Wdf]
KmdfService = aDIO, aDIO_wdfsect
[aDIO_Device886.NT.Wdf]
KmdfService = aDIO, aDIO_wdfsect
[aDIO_DeviceBRG.NT.Wdf]
KmdfService = aDIO, aDIO_wdfsect
[aDIO_wdfsect]
KmdfLibraryVersion = 1.1

[Strings]
SPSVCINST_ASSOCSERVICE= 0x00000002
Provider = "RTD Embedded Technologies Inc."
MfgName = "RTD Embedded Technologies Inc."
ClassName = "RTD cpuModules"
DiskId1 = "aDIO Device Installation Disk #1"
aDIODevice.DeviceDesc = "RTD aDIO Device"
aDIODevice886.DeviceDesc = "RTD aDIO Device"
aDIODeviceBRG.DeviceDesc = "RTD aDIO Device"
aDIO.SVCDESC = "aDIO Device Driver"

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.