> The test I carried out is very simple at this stage. First, the kernel > need to be compiled with the following features: > > Loadable module support > SCSI support > SCSI disk support > Probe all LUNs on each SCSI device > DOS FAT fs support > VFAT fs support > Support for USB and the controller > USB Mass Storage support (as a module) > > > Once the kernel is compiled and machine is rebooted with the new > kernel, insert the mass-storage class driver module by "/sbin/modprobe > usb-storage". Then the reader can be plugged into a usb port and > recognized by the kernel. > > The memory cards are seen as SCSI devices and they can be mounted by > "mount /dev/sdx1 your_mount_point", where x can be a, b, c or d, depending > on the type of the memory card (a: CF, b: MS, c: MMC/SD, d:SM). > > What I've done to test the reader is to copy jpg files of several > hundred KB and a MP3 file of more than 10 MB. After writing, I will > unmount the card to clear the cache in the system. Then I will mount it > again and replay the MP3 and view the jpg files to check with errors. > > Hope this can answer your question. Thanks.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.