[RunTime] IniVersion=0059 // INI Version FWVersion=0032 // Firmware(9320FW.bin) Version DriverVersion=0057 // LLD(9320LLD.dll) Version GrayDefaultGamma=1.0 // for initial gamma table (in rtscan.dll) DefaultGamma=1.0 // for initial gamma table (in rtscan.dll) TADefaultGamma=1.0 // for initial gamma table (in rtscan.dll) Calibration_Forward_Step=288 //288 (not used) CheckLockOnce=0 // 0: alawys check Lock but CheckLockenable = 1 // 1: CheckLockonce ProductID=147 [Debug] Quota_debug=0 // avoid the photoshop occupy the memory problem RGB_Line_Shift=24 // Line space COLOR_SEQUENCE=1 // 1: RGB 0:BGR Motor_Select=0 // For leon to debug motor TA_Motor_Forward=0 StartX=1300 // TA scan mode search start position startx StartY=2175 // TA scan mode search start position starty EndX=1800 // TA scan mode search start position endx EndY=2325 // TA scan mode search start position endy Enable_Motor_Current_Control=0 ShowMessageBox=0 FStartX=0 // Flatbed scan mode search start position startx FStartY=150 // Flatbed scan mode search start position starty FEndX=1000 // Flatbed scan mode search start position endx FEndY=300 // Flatbed scan mode search start position endy Flat_Preview_ExposureTime=7.5 // the preview scan speed = 8.3*11.7*50 = 4855 ms Flat_ExplosureTime_Half=4 // 800 scan mode exposure time Flat_ExplosureTime_Full=6.2 // 1600 scan mode exposure time Flat_ExplosureTime_Stagger=12 // 3200 scan mode exposure time Factory_Test_Lamp=0 // 1 : all of the lamp is on [PTA] SearchPosOnce=0 // 0: disable 1: enable CalibrationAlways=1 // 1 : Each time calibration ExplosuretimeFactor=1.0 PTA_NoStaggerModePixelDarkOffset_R=-512 PTA_NoStaggerModePixelDarkOffset_G=-512 PTA_NoStaggerModePixelDarkOffset_B=-512 PTA_StaggerModePixelDarkOffset_R=-512 PTA_StaggerModePixelDarkOffset_G=-512 PTA_StaggerModePixelDarkOffset_B=-512 PTA_ScanHalfModePixelDarkOffset_R=-512 PTA_ScanHalfModePixelDarkOffset_G=-512 PTA_ScanHalfModePixelDarkOffset_B=-512 PTA_Preview_Shading_Factor_R=1000 PTA_Preview_Shading_Factor_G=1000 PTA_Preview_Shading_Factor_B=1000 PTA_NoStagger_Shading_Factor_R=1000 PTA_NoStagger_Shading_Factor_G=1000 PTA_NoStagger_Shading_Factor_B=1000 PTA_Stagger_Shading_Factor_R=1000 PTA_Stagger_Shading_Factor_G=1000 PTA_Stagger_Shading_Factor_B=1000 PTA_Half_Shading_Factor_R=1000 PTA_Half_Shading_Factor_G=1000 PTA_Half_Shading_Factor_B=1000 PTAMaxGainAmpBit=6 PTAMaxOffsetAmpBit=6 PTABitAllocation=0 // (Gain/Offset) 0:8/8, 1:10/6, 2:12/4 PTA_Scan_Mode_Offset_R=104 PTA_Scan_Mode_Offset_G=96 PTA_Scan_Mode_Offset_B=88 Half_X_Adjust=0 Half_Y_Adjust=0 Full_X_Adjust=-40 //12 Full_Y_Adjust=-12//16 Stagger_X_Adjust=-64 Stagger_Y_Adjust=0 Half_BK_Threshold_R=64 Half_BK_Threshold_G=32 Half_BK_Threshold_B=32 Full_BK_Threshold_R=64 Full_BK_Threshold_G=32 Full_BK_Threshold_B=32 Stagger_BK_Threshold_R=128 Stagger_BK_Threshold_G=64 Stagger_BK_Threshold_B=64 Half_BK_MovingPixelNum=50 Full_BK_MovingPixelNum=100 Stagger_BK_MovingPixelNum=100 PTA_Adjust_Offset_R=97 PTA_Adjust_Offset_G=63 PTA_Adjust_Offset_B=72 PTA_Adjust_Gain_R=145 PTA_Adjust_Gain_G=253 PTA_Adjust_Gain_B=28 PTA_Adjust_ExplosureTime=29 [NTA] SearchPosOnce=0 NTA_Gamma_Enable=1 // 1: Negative ta will implement gamma ExplosuretimeFactor=1.0 NTA_NoStaggerModePixelDarkOffset_R=0 NTA_NoStaggerModePixelDarkOffset_G=0 NTA_NoStaggerModePixelDarkOffset_B=0 NTA_StaggerModePixelDarkOffset_R=0 NTA_StaggerModePixelDarkOffset_G=0 NTA_StaggerModePixelDarkOffset_B=0 NTA_ScanHalfModePixelDarkOffset_R=0 NTA_ScanHalfModePixelDarkOffset_G=0 NTA_ScanHalfModePixelDarkOffset_B=0 NTA_Preview_Shading_Factor_R=1000 NTA_Preview_Shading_Factor_G=1000 NTA_Preview_Shading_Factor_B=1000 NTA_NoStagger_Shading_Factor_R=1000 NTA_NoStagger_Shading_Factor_G=1000 NTA_NoStagger_Shading_Factor_B=1000 NTA_Stagger_Shading_Factor_R=1000 NTA_Stagger_Shading_Factor_G=1000 NTA_Stagger_Shading_Factor_B=1000 NTA_Half_Shading_Factor_R=1000 NTA_Half_Shading_Factor_G=1000 NTA_Half_Shading_Factor_B=1000 NTAMaxGainAmpBit=8 NTAMaxOffsetAmpBit=5 NTABitAllocation=0 // (Gain/Offset) 0:8/8, 1:10/6, 2:12/4 Half_X_Adjust=0 Half_Y_Adjust=0 Full_X_Adjust=-36//50 Full_Y_Adjust=-8//8 Stagger_X_Adjust=-70//76 Stagger_Y_Adjust=-4 Half_WantedExposureFactor=1.0 Full_WantedExposureFactor=1.0 Stagger_WantedExposureFactor=1.0 Half_NTALineGainFactor_R=1.8 //1.0 //0.5 //0.6 Half_NTALineGainFactor_G=3.0 //2.2 //1.1 Half_NTALineGainFactor_B=4.2 //3.4 //1.7 //2.2 Full_NTALineGainFactor_R=1.8 //1.0 //0.5 //0.6 Full_NTALineGainFactor_G=3.0 //2.2 //1.1 Full_NTALineGainFactor_B=4.2 //3.4 //1.7 //2.2 Stagger_NTALineGainFactor_R=1.8 //1.0 //0.5 //0.6 Stagger_NTALineGainFactor_G=3.0 //2.2 //1.1 Stagger_NTALineGainFactor_B=4.2 //3.4 //1.7 //2.2 NTA_Adjust_Offset_R=100 NTA_Adjust_Offset_G=66 NTA_Adjust_Offset_B=68 NTA_Adjust_Gain_R=204 NTA_Adjust_Gain_G=88 NTA_Adjust_Gain_B=108 NTA_Adjust_ExplosureTime=30.303 NTA_Final_Offset_R=104 NTA_Final_Offset_G=96 NTA_Final_Offset_B=88 NTA_Final_Gain_R=239 NTA_Final_Gain_G=218 NTA_Final_Gain_B=241 NTA_Final_ExplosureTime=34.856 [FlatBed] CalibrationAlways=0 // 1 : Each time calibration ReCalibrationTime=600 // unit : second Afe_Adjust=1 Shading_Adjust=1 // only for Afe_Adjust== 0 Default_Afe_Gain_R=75 Default_Afe_Gain_G=75 Default_Afe_Gain_B=75 Default_Afe_Offset_R=128 Default_Afe_Offset_G=128 Default_Afe_Offset_B=128 Preview_X_Adjust=0 Preview_Y_Adjust=0 Half_X_Adjust=-64 //52 Half_Y_Adjust=-70 //368 Full_X_Adjust=-64 //0 Full_Y_Adjust=-70 //384 Stagger_X_Adjust=-64 //0 Stagger_Y_Adjust=-70 //388 Half_BK_Region_Pixel=2 // Base on the neighbour pixel to select the pixel dark value. Full_BK_Region_Pixel=2 // Base on the neighbour pixel to select the pixel dark value. Stagger_BK_Region_Pixel=2 // Base on the neighbour pixel to select the pixel dark value. Half_BK_Threshold_R=64 Half_BK_Threshold_G=64 Half_BK_Threshold_B=64 Full_BK_Threshold_R=64 Full_BK_Threshold_G=64 Full_BK_Threshold_B=64 Stagger_BK_Threshold_R=128 Stagger_BK_Threshold_G=128 Stagger_BK_Threshold_B=128 Preview_Motor_Current=2 // 3 is mean : 0x11,the max motor current 200_Motor_Current=2 400_Motor_Current=2 Half_Motor_Current=2 Full_Motor_Current=1 Stagger_Motor_Current=1 Half_BK_MovingPixelNum=50 Full_BK_MovingPixelNum=50 Stagger_BK_MovingPixelNum=50 [DeviceID] DeviceID0=VID_0461&PID_0395 DeviceID1=VID_04A7&PID_0362 [LUT] Gray_LUT=9320Lut.plg Half_LUT=9320Lut.plg Full_LUT=9320LutH.plg Stagger_LUT=9320LutH.plg PTA_Half_LUT=9320_TA.plg PTA_Full_LUT=9320_TA.plg PTA_Stagger_LUT=9320_TA.plg [Property] Enable_Debug=0 // If release driver,this value should be 0 Enable_ShowTickCount=0 // If release driver,this value should be 0 RGB_Line_Shift=24 // 1200_Platform : 24 , 2400_Platform : 16 COLOR_SEQUENCE=0 HIGH_BUFFER_SIZE=2048000 // Ring Buffer size HIGH_BUFFER_NUM=12 MEDIUM_BUFFER_SIZE=2048000 // Ring Buffer size MEDIUM_BUFFER_NUM=4 LOW_BUFFER_SIZE=1024000 // Ring Buffer size LOW_BUFFER_NUM=4 Max_Diff_Of_Gain=5000 Max_Diff_Of_Dark=5000 TAWarmTime=45 FastWarmTime=5 NormalWarmTime=90 MoreWarmTime=20 // if check the lamp is not stable,wait more warm time FirstStep=5 // only for 2400 platrform SecondStep=2 // only for 2400 platrform WarmTimeValue=180 // for default gain(0x4B) and offset(0x80) TAReWarmupAgain=300 // unit : sec ReWarmupAgain=300 // unit : sec DiffValueAtCheckWarmUp=3 BWThreshold=160 TG_RCH=32 TG_GCH=32 TG_BCH=32 BackTrace_2400_Steps=128 GoHomeACCSteps=500 PreviewSlowdownSteps=63 MaxGainAmpBit=3 MaxOffsetAmpBit=8 BitAllocation=2 // (Gain/Offset) 0:8/8, 1:10/6, 2:12/4 TransferPacketSize=65536 // 128 KB = 1024 *128,the max is 1 MB Enable_EvenOddFilter=0 // Stagger mode ,even odd filter. 1 : Enable. LineArtEnableGamma=1 [Calib_Parm] // enable:1(disable:0) each scan process Calibration_Enable=1 // enable:1(disable:0) search the start position must SearchStartPos = 1 LineGain_Enable=1 // enable:1(disable:0) LineGain adjust LineDark_Enable=1 // enable:1(disable:0) LineDark adjust PixelGain_Enable=1 // enable:1(disable:0) PixelGain adjust PixelDark_Enable=1 // enable:1(disable:0) PixelDark adjust CheckLock_Enable=1 // enable:1(disable:0) Check scanner lock Gamma_Enable=1 // enable:1(disable:0) Gamma mapping LineGainStableValue=230 // For dynamic check the linegain adjust S3LimitedTime=10 // No matter dynamic afe gain adjust is stable,just go to the next step DumpCalibData=1 // Default1:Enable 0:Disable write calibration data to ini file DynamicDetectAfe=5 // 1: dynamic detect the afe is stable,then adjust afe register // 0: wait to the S3LimitedTime,then adjust afe register TargetWhite_R=232 // Target Code for calculating R channel VGA Gain TargetWhite_G=231 // Target Code for calculating G channel VGA Gain TargetWhite_B=232 // Target Code for calculating B channel VGA Gain TargetDark_R=8 // Target Code for calculating R channel DC Offset TargetDark_G=8 // Target Code for calculating G channel DC Offset TargetDark_B=8 // Target Code for calculating B channel DC Offset TA_Explosure_TargetWhite_R=200 // Target white for explosure time adjust TA_Explosure_TargetWhite_G=200 // Target white for explosure time adjust TA_Explosure_TargetWhite_B=200 // Target white for explosure time adjust TA_TargetWhite_R=230 // Target Code for calculating R channel VGA Gain TA_TargetWhite_G=230 // Target Code for calculating G channel VGA Gain TA_TargetWhite_B=230 // Target Code for calculating B channel VGA Gain TA_TargetDark_R=5 // Target Code for calculating R channel DC Offset TA_TargetDark_G=5 // Target Code for calculating G channel DC Offset TA_TargetDark_B=5 // Target Code for calculating B channel DC Offset PGAGain=1 // VGA Gain for AFE Default:1: enable 0:disable(Using ini for Setting) PGAGain[1]=75 PGAGain[2]=75 PGAGain[3]=75 DACOffset=1 // DC Offset for AFE Default:1: enable 0:disable(Using ini for Setting) DACOffset[1]=0 DACOffset[2]=0 DACOffset[3]=0 FilterFactor=0.9 CutPercent=0.05 RegionNum=2 LineGainRp=123 // Gain=1.3 LineGainGp=109 // Gain=1.2 LineGainBp=208 // Gain=2.8 ExplosureTimeTp=28 NTAExplosureTimeFactor=1.0 //1.8 //3.7 [Shading_Parm] ShadingOnce=0 // 1:enable ,only do pixel gain and offset at each mode first time, 0: disable always do pixel gain and offset PixelOffsetDPCM=1 PTAPixelOffsetDPCM=1 NTAPixelOffsetDPCM=1 WhiteShadingLines_FLB=60 WhiteDropBright_FLB=0 WhiteDropDark_FLB=30 DarkShadingLines_FLB=20 DarkDropBright_FLB=0 DarkDropDark_FLB=0 WhiteShadingLines_TA=60 WhiteDropBright_TA=0 WhiteDropDark_TA=30 DarkShadingLines_TA=30 DarkDropBright_TA=0 DarkDropDark_TA=0 Preview_Mode_Offset_R=111 Preview_Mode_Offset_G=102 Preview_Mode_Offset_B=115 Preview_Mode_Gain_R=197 Preview_Mode_Gain_G=215 Preview_Mode_Gain_B=216 Preview_Mode_Afe_Value=149 Scan_Half_Mode_Offset_R=89 Scan_Half_Mode_Offset_G=84 Scan_Half_Mode_Offset_B=88 Scan_Half_Mode_Gain_R=188 Scan_Half_Mode_Gain_G=209 Scan_Half_Mode_Gain_B=207 Scan_Half_Mode_Afe_Value=110 Scan_NoStagger_Mode_Offset_R=110 Scan_NoStagger_Mode_Offset_G=107 Scan_NoStagger_Mode_Offset_B=114 Scan_NoStagger_Mode_Gain_R=214 Scan_NoStagger_Mode_Gain_G=228 Scan_NoStagger_Mode_Gain_B=232 Scan_NoStagger_Mode_Afe_Value=147 Scan_Stagger_Mode_Offset_R=70 Scan_Stagger_Mode_Offset_G=71 Scan_Stagger_Mode_Offset_B=69 Scan_Stagger_Mode_Gain_R=140 Scan_Stagger_Mode_Gain_G=171 Scan_Stagger_Mode_Gain_B=180 Scan_Stagger_Mode_Afe_Value=251 Gray_Scan_NoStagger_Mode_Offset_R=172 Gray_Scan_NoStagger_Mode_Offset_G=163 Gray_Scan_NoStagger_Mode_Offset_B=181 Gray_Scan_Stagger_Mode_Offset_R=103 Gray_Scan_Stagger_Mode_Offset_G=96 Gray_Scan_Stagger_Mode_Offset_B=99 Gray_Scan_NoStagger_Mode_Gain_R=140 Gray_Scan_NoStagger_Mode_Gain_G=154 Gray_Scan_NoStagger_Mode_Gain_B=162 Gray_Scan_NoStagger_Mode_Afe_Value=218 Gray_Scan_Stagger_Mode_Gain_R=200 Gray_Scan_Stagger_Mode_Gain_G=178 Gray_Scan_Stagger_Mode_Gain_B=189 Gray_Scan_Stagger_Mode_Afe_Value=255 PreviewModePixelDarkOffset_R=0 PreviewModePixelDarkOffset_G=0 PreviewModePixelDarkOffset_B=0 NoStaggerModePixelDarkOffset_R=0 NoStaggerModePixelDarkOffset_G=0 NoStaggerModePixelDarkOffset_B=0 StaggerModePixelDarkOffset_R=0 StaggerModePixelDarkOffset_G=0 StaggerModePixelDarkOffset_B=0 ScanHalfModePixelDarkOffset_R=0 ScanHalfModePixelDarkOffset_G=0 ScanHalfModePixelDarkOffset_B=0 Preview_Shading_Factor_R=1020 //1054 Preview_Shading_Factor_G=1020 //1058 Preview_Shading_Factor_B=1020 //1054 NoStagger_Shading_Factor_R=1020 //1054 NoStagger_Shading_Factor_G=1020 //1058 NoStagger_Shading_Factor_B=1020 //1054 Stagger_Shading_Factor_R=1020 //1054 Stagger_Shading_Factor_G=1020 //1058 Stagger_Shading_Factor_B=1020 //1054 Half_Shading_Factor_R=1020 //1054 Half_Shading_Factor_G=1020 //1058 Half_Shading_Factor_B=1020 //1054 BK_AvePixelNum=100 BK_Threshold=64 [StartPos_Parm] SearchOnce=0 // Default 0:Search Start Position Every Time 1: Search Once. X_Position=194 Y_Position=1555 X_RealSet=640 Y_RealSet=3264 PTA_X_RealSet=11788 PTA_Y_RealSet=41984 NTA_X_RealSet=11788 NTA_Y_RealSet=41994 Default_X=260 //140 Default_Y=1500 //488 TA_Default_X=4666 //140 TA_Default_Y=12944 //488 PTA_Default_X=4666 //140 PTA_Default_Y=12944 //13800 //18000 //488 NTA_Default_X=4666 //140 NTA_Default_Y=12944 //13800 //18000 //488 X_Offset=120 // (unit : 3200 dpi) Y_Offset=1320 // (unit : half step) PTA_X_Offset=660 //828 //16 // (unit : 3200 dpi) PTA_Y_Offset=6048 //6032 //320 // (unit : half step) NTA_X_Offset=660 //16 // (unit : 3200 dpi) NTA_Y_Offset=6058 //6102 //5950 //6000 //320 // (unit : half step) TA_X_Range=10000 TA_Y_Range=10000 X_Range=10000 Y_Range=10000 [Image] Software_Average=0 [PWM_Control] PWM_Enable=0 DurationOn=100 DurationOff=100 [LOSSLESS] LosslessEnable=0 LossLessValue=7 // Use Decimal format(Combine keep bit and encode bit value) KeepBits=0 [Time] Enter DrvSetParameter Function=7324546 Enter DrvStartScan Function=7324562 Enter set scan parameter=7324562 Start check lock time=7324578 Start to download table for motorback time=4278390 End to download table for motorback time=4279484 Start to polling go home 1st time=4279484 end to polling go home 1st time=4279625 start to MotorForward time=4279625 End to MotorForward time=4283765 start to MotorBackward=4283765 End to MotorBackward time=4287687 End check lock time=7324578 Enter each scan mode set parameter function time=7324593 Start to Write afe register time=7366578 End to Write afe register time=7366578 Leave DrvStartScan Function=19302890 Start position calibration time=7324625 Start of Calibration follow time=4287750 Start of set param for Calibration follow time=7324640 End of set param for Calibration follow time=7325125 Start to read Calibration data time=7325125 End to read Calibration data time=7325953 Start to backword for calibration time=7325953 End to go home for calibration time=7326203 start to carriage is arrived time=7326203 end to carriage is arrived time=7326609 End of Calibration follow time=4295515 End position calibration time=7326656 Start Afe adjust time=7326687 Start to download table for afe time=7326703 End to download table for afe time=7326796 End Afe adjust time=7327406 Start Shading adjust time=7327421 End Shading adjust time=4300734 Start Download gamma time=4300765 Start Download red gamma time=4300765 End Download red gamma time=4300796 End Download gamma time=4300859 [Time Result] **All the Total Calibration time**(ms)=9015 ##Total check lock time##=0 Total to Write afe register time=0 Total to download table for motorback time=47 Total to polling go home 1st time=94 Total to MotorForward time=1453 Total set param for Calibration follow time=468 Total to read Calibration data time=828 Total to carriage is arrived time=407 ##Total calibration time##=2000 Total to download table for afe time=94 ##Total Afe adjust time##=719 ##Total Shading adjust time##=4406 Total Download red gamma time=31 Total Download gamma time=93Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.