[Set_001] Name=LV4000 Plus CL: Free Run mode, shutter 1/50 BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=10 Timeout=1000 Cmd000=; set trigger mode to normal Cmd001=TR=0 Cmd002=; set shutter mode to normal Cmd003=SM=0 Cmd004=; set shutter speed to 1/50 Cmd005=SH=1 Cmd006= [Set_002] Name=LV4000 Plus CL: AR Edge pre-select trigger mode BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=10 Timeout=1000 Cmd000=; set trigger mode Edge Cmd001=TR=1 Cmd002=; shutter mode normal Cmd003=SM=0 Cmd004=; shutter time to 1/100 Cmd005=SH=2 Cmd006= [Set_003] Name=LV4000 Plus CL: AR Pulse Width trigger mode BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=10 Timeout=1000 Cmd000=; set trigger mode to Pulse Width Cmd001=TR=2 Cmd002=; shutter mode programmable Cmd003=SM=1 Cmd004= [Set_004] Name=LV4000 Plus CL: get status BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=0 EOT=10 Timeout=2000 Cmd000=ST? [Set_005] Name=AVIIVA M2CL: Set Test Pattern to ON BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D UseEOT=0 EOT=13 Timeout=300 Cmd000=T=1 [Set_006] Name=AVIIVA M2CL: Set Test Pattern to OFF BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D UseEOT=0 EOT=13 Timeout=300 Cmd000=T=0 [Set_007] Name=AVIIVA M2CL: Free Run mode, 1x8-bit, 20 MHz BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D UseEOT=0 EOT=13 Timeout=300 Cmd000=; set free-running mode M=1 Cmd001=M=1 Cmd002=; 8-bit Cmd003=S=2 Cmd004=; set one output multiplexed at 20 MHz data rate Cmd005=H=3 [Set_008] Name=AVIIVA M2CL: Trigerred and Integration Time Controlled, 1x12-bit, 20MHz BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D UseEOT=0 EOT=13 Timeout=300 Cmd000=; set Trigger and Integration time controlled Cmd001=M=3 Cmd002=; 12-bit Cmd003=S=0 Cmd004=; set one output at 20 MHz data rate Cmd005=H=3 [Set_009] Name=AVIIVA M2CL: Trigerred and Integration Time Controlled, 2x12-bit, 20MHz BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D UseEOT=0 EOT=13 Timeout=300 Cmd000=; set Trigger and Integration time controlled Cmd001=M=3 Cmd002=; 12-bit Cmd003=S=0 Cmd004=; set two outputs at 20 MHz data rate Cmd005=H=6 [Set_010] Name=AVIIVA M2CL: Trigerred and Integration Time Controlled, 2x8-bit, 20MHz BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D UseEOT=0 EOT=13 Timeout=300 Cmd000=; set Trigger and Integration time controlled Cmd001=M=3 Cmd002=; 8-bit Cmd003=S=2 Cmd004=; set two outputs at 20 MHz data rate Cmd005=H=6 [Set_011] Name=AVIIVA M2CL: Trigerred and Integration Time Controlled, 1x8-bit, 20MHz BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D UseEOT=0 EOT=13 Timeout=300 Cmd000=; set Trigger and Integration time controlled Cmd001=M=3 Cmd002=; 8-bit Cmd003=S=2 Cmd004=; set one output at 20 MHz data rate Cmd005=H=3 [Set_012] Name=AVIIVA M2CL: Trigerred and Integration Time Controlled, 2x12-bit, 30MHz BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D UseEOT=0 EOT=13 Timeout=300 Cmd000=; set Trigger and Integration time controlled Cmd001=M=3 Cmd002=; 12-bit Cmd003=S=0 Cmd004=; set two outputs at 30 MHz data rate Cmd005=H=8 [Set_013] Name=AVIIVA C2CL: Free Run mode, 3x8-bit, 3x20 MHz BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D UseEOT=0 EOT=13 Timeout=300 Cmd000=; set auto-writing to EEPROM to off Cmd001=E=1 Cmd002=; restore camera defaults Cmd003=!=5 Cmd004=; set free-run mode Cmd005=M=1 Cmd006=; Output format to RGB paralel 1->1 3x8-bit Cmd007=S=1 Cmd008=; set data transfer to 3x20 MHz data rate Cmd009=H=3 Cmd010=; integration time 3000 usec Cmd011=I=3000 Cmd012= [Set_014] Name=AVIIVA C2CL: Trigger and int. time controlled, 3x8-bit, 3x20 MHz BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D UseEOT=0 EOT=13 Timeout=300 Cmd000=; set auto-writing to EEPROM to off Cmd001=E=1 Cmd002=; restore camera defaults Cmd003=!=5 Cmd004=; set trigger and integration time controlled Cmd005=M=3 Cmd006=; Output format to RGB paralel 1->1 3x8-bit Cmd007=S=1 Cmd008=; set data transfer to 3x20 MHz data rate Cmd009=H=3 Cmd010= [Set_015] Name=AVIIVA C2CL 1k3: Free Run mode, 3x8-bit, 3x20 MHz BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D UseEOT=0 EOT=13 Timeout=300 Cmd000=; set auto-writing to EEPROM to off Cmd001=E=1 Cmd002=; restore camera defaults Cmd003=!=5 Cmd004=; set free-run mode Cmd005=M=1 Cmd006=; Output format to RGB paralel 3->1 3x8-bit Cmd007=S=2 Cmd008=; set data transfer to 3x20 MHz data rate Cmd009=H=3 Cmd010=; integration time 3000 usec Cmd011=I=3000 Cmd012= [Set_016] Name=Teli_CS6910CL_SXGA15: Free Run BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend= UseEOT=0 EOT=13 Timeout=1000 Cmd000=; Power off the camera before Cmd001=; sending this set of commands Cmd002=;Shutter(0x63) = 0x07 Cmd003=#026307#03 Cmd004=;Shutter(0x64) = 0x03 Cmd005=#026403#03 Cmd006=;Upload (0x60) = 0x01 Cmd007=#026001#03 [Set_017] Name=Teli_CS6910CL_SXGA30: Free Run BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend= UseEOT=0 EOT=13 Timeout=1000 Cmd000=; Power off the camera before Cmd001=; sending this set of commands Cmd002=;Shutter(0x63) = 0x07 Cmd003=#026307#03 Cmd004=;Shutter(0x64) = 0x04 Cmd005=#026404#03 Cmd006=;Upload (0x60) = 0x01 Cmd007=#026001#03 [Set_018] Name=Teli_CS6910CL_VGA30: Free Run BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend= UseEOT=0 EOT=13 Timeout=1000 Cmd000=; Power off the camera before Cmd001=; sending this set of commands Cmd002=;Shutter(0x63) = 0x04 Cmd003=#026304#03 Cmd004=;Shutter(0x64) = 0x04 Cmd005=#026404#03 Cmd006=;Upload (0x60) = 0x01 Cmd007=#026001#03 [Set_019] Name=Teli_CS6910CL_VGA30: AR Pulse Width Mode BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend= UseEOT=0 EOT=13 Timeout=1000 Cmd000=; Power off the camera before Cmd001=; sending this set of commands Cmd002=;Shutter(0x63) = 0x04 Cmd003=#026304#03 Cmd004=;Shutter(0x64) = 0x04 Cmd005=#026404#03 Cmd006=;Upload (0x60) = 0x01 Cmd007=#026001#03 Cmd008=;ShutterMode(0x66) = 0x01 Cmd009=#026601#03 Cmd010=;TriggerPol(0x67) = 0x00 Cmd011=#026700#03 Cmd012=;TriggerMode(0x68) = 0x01 Cmd013=#026801#03 Cmd014=;ExposureMode(0x69) = 0x00 Cmd015=#026900#03 Cmd016=;Upload (0x60) = 0x01 Cmd017=#026001#03 Cmd018=;Upload (0x60) = 0x01 Cmd019=#026001#03 Cmd020= [Set_020] Name=Teli_CS6910CL_SXGA30: AR Pulse Width Mode BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend= UseEOT=0 EOT=13 Timeout=1000 Cmd000=; Power off the camera before Cmd001=; sending this set of commands Cmd002=;Shutter(0x63) = 0x07 Cmd003=#026307#03 Cmd004=;Shutter(0x64) = 0x04 Cmd005=#026404#03 Cmd006=;Upload (0x60) = 0x01 Cmd007=#026001#03 Cmd008=;ShutterMode(0x66) = 0x01 Cmd009=#026601#03 Cmd010=;TriggerPol(0x67) = 0x00 Cmd011=#026700#03 Cmd012=;TriggerMode(0x68) = 0x01 Cmd013=#026801#03 Cmd014=;ExposureMode(0x69) = 0x00 Cmd015=#026900#03 Cmd016=;Upload (0x60) = 0x01 Cmd017=#026001#03 Cmd018=;Upload (0x60) = 0x01 Cmd019=#026001#03 [Set_021] Name=LV8200CL Free Run, 1x8-bit BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load factory defaults Cmd001=LD=0 Cmd002=; output select - single channel Cmd003=OS=0 Cmd004=; bit allocation - 8-bit Cmd005=BA=1 Cmd006=; shutter mode - normal Cmd007=SM=0 Cmd008=; shutter speed - off Cmd009=SH=0 [Set_023] Name=LV8200CL Free Run, 1x10-bit BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load factory defaults Cmd001=LD=0 Cmd002=; output select - single channel Cmd003=OS=0 Cmd004=; bit allocation - 10-bit Cmd005=BA=0 Cmd006=; shutter mode - normal Cmd007=SM=0 Cmd008=; shutter speed - off Cmd009=SH=0 [Set_024] Name=LV8200CL Free Run, 2x10-bit BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load factory defaults Cmd001=LD=0 Cmd002=; output select - dual-channel Cmd003=OS=1 Cmd004=; bit allocation - 10-bit Cmd005=BA=0 Cmd006=; shutter mode - normal Cmd007=SM=0 Cmd008=; shutter speed - off Cmd009=SH=0 [Set_025] Name=LV8200CL Free Run, 2x8-bit BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load factory defaults Cmd001=LD=0 Cmd002=; output select - dual channel Cmd003=OS=1 Cmd004=; bit allocation - 8-bit Cmd005=BA=1 Cmd006=; shutter mode - normal Cmd007=SM=0 Cmd008=; shutter speed - off Cmd009=SH=0 [Set_022] Name=LV8200CL AR Mode0: Pulse Width Control Mode, 1x8-bit BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load defaults Cmd001=LD=0 Cmd002=; output select - single channel Cmd003=OS=0 Cmd004=; bit allocation - 8 bit Cmd005=BA=1 Cmd006=; shutter mode normal Cmd007=SM=0 Cmd008=; shutter speed off Cmd009=SH=0 Cmd010=; pulse width trigger mode Cmd011=TR=3 Cmd012=; async LVAL sync accum. Cmd013=LS=1 Cmd014=; trigger polarity active low Cmd015=TP=0 Cmd016=; trigger input Camera Link Cmd017=TI=0 [Set_026] Name=LV8200CL AR Mode0: Pulse Width Control Mode, 1x10-bit BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load defaults Cmd001=LD=0 Cmd002=; output select - single channel Cmd003=OS=0 Cmd004=; bit allocation - 10 bit Cmd005=BA=0 Cmd006=; shutter mode normal Cmd007=SM=0 Cmd008=; shutter speed off Cmd009=SH=0 Cmd010=; pulse width trigger mode Cmd011=TR=3 Cmd012=; async LVAL sync accum. Cmd013=LS=1 Cmd014=; trigger polarity active low Cmd015=TP=0 Cmd016=; trigger input Camera Link Cmd017=TI=0 [Set_027] Name=LV8200CL AR Mode0: Pulse Width Control Mode, 2x10-bit BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load defaults Cmd001=LD=0 Cmd002=; output select - dual channel Cmd003=OS=1 Cmd004=; bit allocation - 10 bit Cmd005=BA=0 Cmd006=; shutter mode normal Cmd007=SM=0 Cmd008=; shutter speed off Cmd009=SH=0 Cmd010=; pulse width trigger mode Cmd011=TR=3 Cmd012=; async LVAL sync accum. Cmd013=LS=1 Cmd014=; trigger polarity active low Cmd015=TP=0 Cmd016=; trigger input Camera Link Cmd017=TI=0 [Set_028] Name=LV8200CL AR Mode0: Pulse Width Control Mode, 2x8-bit BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load defaults Cmd001=LD=0 Cmd002=; output select - dual channel Cmd003=OS=1 Cmd004=; bit allocation - 8 bit Cmd005=BA=1 Cmd006=; shutter mode normal Cmd007=SM=0 Cmd008=; shutter speed off Cmd009=SH=0 Cmd010=; pulse width trigger mode Cmd011=TR=3 Cmd012=; async LVAL sync accum. Cmd013=LS=1 Cmd014=; trigger polarity active low Cmd015=TP=0 Cmd016=; trigger input Camera Link Cmd017=TI=0 [Set_029] Name=LV8200CL AR Mode1: Edge Pre-select Mode, 1x8-bit, shutter off BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load defaults Cmd001=LD=0 Cmd002=; output select - single channel Cmd003=OS=0 Cmd004=; bit allocation - 8 bit Cmd005=BA=1 Cmd006=; shutter mode normal Cmd007=SM=0 Cmd008=; shutter speed off Cmd009=SH=0 Cmd010=; Edge pre-select Cmd011=TR=1 Cmd012=; async LVAL sync accum. Cmd013=LS=1 Cmd014=; trigger polarity active low Cmd015=TP=0 Cmd016=; trigger input Camera Link Cmd017=TI=0 [Set_030] Name=LV8200CL AR Mode1: Edge Pre-select Mode, 1x8-bit, shutter 1/120 BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load defaults Cmd001=LD=0 Cmd002=; output select - single channel Cmd003=OS=0 Cmd004=; bit allocation - 8 bit Cmd005=BA=1 Cmd006=; shutter mode normal Cmd007=SM=0 Cmd008=; shutter speed 1/120 Cmd009=SH=2 Cmd010=; Edge pre-select Cmd011=TR=1 Cmd012=; async LVAL sync accum. Cmd013=LS=1 Cmd014=; trigger polarity active low Cmd015=TP=0 Cmd016=; trigger input Camera Link Cmd017=TI=0 [Set_031] Name=LV8200CL AR Mode1: Edge Pre-select Mode, 1x8-bit, shutter 1/60 BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load defaults Cmd001=LD=0 Cmd002=; output select - single channel Cmd003=OS=0 Cmd004=; bit allocation - 8 bit Cmd005=BA=1 Cmd006=; shutter mode normal Cmd007=SM=0 Cmd008=; shutter speed 1/60 Cmd009=SH=1 Cmd010=; Edge pre-select Cmd011=TR=1 Cmd012=; async LVAL sync accum. Cmd013=LS=1 Cmd014=; trigger polarity active low Cmd015=TP=0 Cmd016=; trigger input Camera Link Cmd017=TI=0 [Set_032] Name=LV8200CL AR Mode1: Edge Pre-select Mode, 1x10-bit, shutter 1/60 BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load defaults Cmd001=LD=0 Cmd002=; output select - single channel Cmd003=OS=0 Cmd004=; bit allocation - 10 bit Cmd005=BA=0 Cmd006=; shutter mode normal Cmd007=SM=0 Cmd008=; shutter speed 1/60 Cmd009=SH=1 Cmd010=; Edge pre-select Cmd011=TR=1 Cmd012=; async LVAL sync accum. Cmd013=LS=1 Cmd014=; trigger polarity active low Cmd015=TP=0 Cmd016=; trigger input Camera Link Cmd017=TI=0 [Set_033] Name=LV8200CL AR Mode1: Edge Pre-select Mode, 2x10-bit, shutter 1/60 BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load defaults Cmd001=LD=0 Cmd002=; output select - dual channel Cmd003=OS=1 Cmd004=; bit allocation - 10 bit Cmd005=BA=0 Cmd006=; shutter mode normal Cmd007=SM=0 Cmd008=; shutter speed 1/60 Cmd009=SH=1 Cmd010=; Edge pre-select Cmd011=TR=1 Cmd012=; async LVAL sync accum. Cmd013=LS=1 Cmd014=; trigger polarity active low Cmd015=TP=0 Cmd016=; trigger input Camera Link Cmd017=TI=0 [Set_034] Name=LV8200CL AR Mode1: Edge Pre-select Mode, 2x8-bit, shutter 1/60 BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load defaults Cmd001=LD=0 Cmd002=; output select - dual channel Cmd003=OS=1 Cmd004=; bit allocation - 8 bit Cmd005=BA=1 Cmd006=; shutter mode normal Cmd007=SM=0 Cmd008=; shutter speed 1/60 Cmd009=SH=1 Cmd010=; Edge pre-select Cmd011=TR=1 Cmd012=; async LVAL sync accum. Cmd013=LS=1 Cmd014=; trigger polarity active low Cmd015=TP=0 Cmd016=; trigger input Camera Link Cmd017=TI=0 [Set_035] Name=LV8200CL AR Mode2: Reset Continous (smearless) Mode, 1x8-bit, shutter 1/60 BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load defaults Cmd001=LD=0 Cmd002=; output select - single channel Cmd003=OS=0 Cmd004=; bit allocation - 8 bit Cmd005=BA=1 Cmd006=; shutter mode normal Cmd007=SM=0 Cmd008=; shutter speed 1/60 Cmd009=SH=1 Cmd010=; Restart Continuous mode Cmd011=TR=2 Cmd012=; async LVAL sync accum. Cmd013=LS=1 Cmd014=; trigger polarity active low Cmd015=TP=0 Cmd016=; trigger input Camera Link Cmd017=TI=0 [Set_036] Name=LV8200CL AR Mode2: Reset Continous (smearless) Mode, 2x8-bit, shutter 1/60 BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load defaults Cmd001=LD=0 Cmd002=; output select - dual channel Cmd003=OS=1 Cmd004=; bit allocation - 8 bit Cmd005=BA=1 Cmd006=; shutter mode normal Cmd007=SM=0 Cmd008=; shutter speed 1/60 Cmd009=SH=1 Cmd010=; Restart Continuous mode Cmd011=TR=2 Cmd012=; async LVAL sync accum. Cmd013=LS=1 Cmd014=; trigger polarity active low Cmd015=TP=0 Cmd016=; trigger input Camera Link Cmd017=TI=0 [Set_037] Name=LV8200CL AR Mode2: Reset Continous (smearless) Mode, 2x10-bit, shutter 1/60 BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load defaults Cmd001=LD=0 Cmd002=; output select - dual channel Cmd003=OS=1 Cmd004=; bit allocation - 10 bit Cmd005=BA=0 Cmd006=; shutter mode normal Cmd007=SM=0 Cmd008=; shutter speed 1/60 Cmd009=SH=1 Cmd010=; Restart Continuous mode Cmd011=TR=2 Cmd012=; async LVAL sync accum. Cmd013=LS=1 Cmd014=; trigger polarity active low Cmd015=TP=0 Cmd016=; trigger input Camera Link Cmd017=TI=0 [Set_038] Name=LV8200CL AR Mode2: Reset Continous (smearless) Mode, 1x10-bit, shutter 1/60 BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D#0A UseEOT=1 EOT=13 Timeout=1000 Cmd000=; load defaults Cmd001=LD=0 Cmd002=; output select - single channel Cmd003=OS=0 Cmd004=; bit allocation - 10 bit Cmd005=BA=0 Cmd006=; shutter mode normal Cmd007=SM=0 Cmd008=; shutter speed 1/60 Cmd009=SH=1 Cmd010=; Restart Continuous mode Cmd011=TR=2 Cmd012=; async LVAL sync accum. Cmd013=LS=1 Cmd014=; trigger polarity active low Cmd015=TP=0 Cmd016=; trigger input Camera Link Cmd017=TI=0 [General] LastSetIndex=12 [Set_039] Name=Teli_CSB4000CL: Free-run mode BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend= UseEOT=0 EOT=13 Timeout=200 Cmd000=; Power off/on the camera before Cmd001=; sending this set of commands Cmd002= Cmd003=;Trigger 1 (0x6A) = 0x00 Cmd004=#026A00#03 Cmd005= [Set_040] Name=Teli_CSB4000CL: Async reset - Pulse width mode 10-bit BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend= UseEOT=0 EOT=13 Timeout=200 Cmd000=; Power off/on the camera before Cmd001=; sending this set of commands Cmd002= Cmd003=;10-bit format (0x90) = 0x00 Cmd004=#029000#03 Cmd005= Cmd006=;Shutter mode global(0x66) = 0x00 Cmd007=#026600#03 Cmd008= Cmd009=;Trigger 1 (0x6A) = 0x01 Cmd010=#026A01#03 Cmd011= Cmd012=;Trigger 2 (0x6B) = 0x01 Cmd013=#026B01#03 Cmd014= Cmd015=;Upload (0x6E) = 0x01 Cmd016=#026E01#03 [Set_041] Name=Teli_CSB4000CL: Async reset - Fixed shutter mode 10-bit BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend= UseEOT=0 EOT=13 Timeout=200 Cmd000=; Power off/on the camera before Cmd001=; sending this set of commands Cmd002= Cmd003=;10-bit format (0x90) = 0x00 Cmd004=#029000#03 Cmd005= Cmd006=;Shutter mode global(0x66) = 0x00 Cmd007=#026600#03 Cmd008= Cmd009=;Trigger 1 (0x6A) = 0x01 Cmd010=#026A01#03 Cmd011= Cmd012=;Trigger 2 (0x6B) = 0x00 Cmd013=#026B00#03 Cmd014= Cmd015=;Upload (0x6E) = 0x01 Cmd016=#026E01#03 [Set_042] Name=Teli_CSB4000CL: Get Status BaudRate=9600 Parity=0 ByteSize=8 StopBit=1 AppendToSend= UseEOT=0 EOT=13 Timeout=200 Cmd000=#0241RQ#03 Cmd001=#0295RQ#03 Cmd002= [Set_043] Name=PicSight-CL BaudRate=57600 Parity=0 ByteSize=8 StopBit=1 AppendToSend=#0D UseEOT=1 EOT=13 Timeout=1000 Cmd000=; Trigger Mode: Cmd001=; There are three trigger modes available Cmd002=; mode=1 ; Freerun Cmd003=; mode=2 ; Asynchron Reset: Edge Preselect Cmd004=; mode=3 ; Asynchron Reset: Pulsewidth Cmd005= Cmd006=; Shutter Cmd007=; The shutter can be set to fixed shutter time Cmd008=; values. The function set the nearest time Cmd009=; equal or below the requested one. Cmd010=; To verify what is really set, use the read Cmd011=; command. Cmd012=; sht=<time_in_usec> ; set the shutter time Cmd013=; sht? ; retrieves the shutter time Cmd014= Cmd015=; Gain Cmd016=; The Gain can be set according to the Cmd017=; given range of the sensor. The value Cmd018=; represents the gain in db multiplied by 100 Cmd019=; For example the gain 23.1 is set/read as 2310 Cmd020=; For verification this value have to be read Cmd021=; after the write. Cmd022=; Cmd023=; ag=<gain> ; set the analog gain Cmd024=; ag? ;retrieves the current gain Cmd025= Cmd026=; Blacklevel Cmd027=; The Blacklevel can be set if available for the Cmd028=; specific sensor Cmd029=; Cmd030=; bl=<blacklevel> ; set the blacklevel Cmd031=; bl? ;retrieves the current blacklevel Cmd032= Cmd033=; Version information about the software can be Cmd034=; retrieved with the following command: Cmd035=; ver? Cmd036= Cmd037=; Example Cmd038=; get the current software version Cmd039=ver? Cmd040=; set freerun Cmd041=mode=1 Cmd042=; set shutter to 1000 usec Cmd043=sht=4000 Cmd044=; set the gain to 23 db Cmd045=ag=2300 Cmd046=; set the blacklevel to 0 Cmd047=bl=0 Cmd048=; read back the shutter value Cmd049=sht? Cmd050=; read back the gain value Cmd051=ag? Cmd052=; read back the current blacklevel Cmd053=bl?Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.