******************************************************************************* * [Default] * Title // CPL Title * * Hint // Tray Icon Hint * * SR_Limited // 0: No Limitation * // 1:48KHz * // 2:96kHz * * SPDIFIN_Connector_Select= // 0: Default 1:Support S/PDIF In connector option. 2:Disable * * [DynamicSetting] * Is_first_boot // First installation flag. * // 1:First 0:Otherwise. * SQ_Is_Enable // QSound enable value.Default is 0. * // 1:Enable 0:Disable. * CPL_SPDIFIN_wMonitorDevice= // 0:No Item Selected. * // 256:No S/PDIF * // 512:Loop Back S/PDIF In to Front Speaker * // 1024:Loop Back S/PDIF In to 7/8 ch Speaker * // 2048:Loop Back S/PDIF In to S/PDIF Out * * CPL_SPDIFIN_SpdifInSwitch= // 32768:OPtical * // 16384:Coaxial * * PerformanceMode // 1:Enalbe * // 0:Disable * * CPL_Language_Selection // Langeage value.Default value is 0.DO NOT cahneg it. * CPL_Envirnment_Selection // Envirnment value.Default value is 0.DO NOT cahneg it. * CPL_SPDIFOUT_Enable // S/PDIF Out enable/disable.Default value is 1.DO NOT cahneg it. * * CPL_SR_EN // Auto sample rate value.Default value is 0.DO NOT cahneg it. * CPL_SR_OP=0 // Sample rate value.Default value is 0.DO NOT cahneg it. * LinkedRecord_0 // Recording Linked.Default value is 268435455.DO NOT cahneg it. * LinkedRecord_1 // Palyback Linked.Default value is 268435455.DO NOT cahneg it. * LinkedRecord_2 // Master volume Linked.Default value is 268435455.DO NOT cahneg it. * TG_link_Enable // TG link enable/disable.Default value is 0.DO NOT cahneg it. * HW_Volume_Default_value // Hardware volume control.Default value is 0.DO NOT cahneg it. * Hide_HW_VolumeCtrl // Show or hide hardware volume contro option. * // Show:0 Hide:1 * Hide_Bass_management // Show or hide bass management page. * // Show:0 Hide:1 * GPIO11Status // GPIO pin 11 .Default value is 0.DO NOT cahneg it. * Hide_Auto_Sample_Rate // Show or hide auto sample rate option. * // Show:0 Hide:1 * Hide_High_Sample_Rate // Show or hide high sample rate option. * // Show:0 Hide:1 * VT1618_Reboot_Flag // Special case in VT1618 codec.Default value is 0. * * [EQ_Preset] // Do not change the key value. * [BassManagement] // Do not change the key value. * [HardwaveFilter] * DefaultOption // 0: Response 1 - half band FIR. * // 1: Response 4 - no alias linear phase. * // 2: Response 5 - No alias minimum phase. ******************************************************************************* [Default] SR_Limited=0 skin_name=skin.bmp SQ_Is_Enable=0 [DynamicSetting] Is_first_boot=0 SQ_Is_Enable=0 CPL_SpeakerCfg=2 CPL_SPDIFIN_SpdifInSwitch=32768 CPL_SPDIFIN_wMonitorDevice=0 CPL_Language_Selection=0 CPL_Envirnment_Selection=0 PerformanceMode=0 CPL_SPDIFOUT_Enable=1 CPL_SR_EN=0 CPL_SR_OP=0 LinkedRecord_0=268435455 LinkedRecord_1=268435455 LinkedRecord_2=268435455 TG_link_Enable=0 HW_Volume_Default_value=1 Hide_HW_VolumeCtrl=0 Hide_Bass_management=1 GPIO11Status=0 Hide_Auto_Sample_Rate=0 Hide_High_Sample_Rate=0 VT1618_Reboot_Flag=0 [EQ_Preset] ItemCount=4 Item0=Techno,8,17,31,44,41,20,29,36,17,1 Item1=Jazz,22,29,43,43,44,31,29,29,29,29 Item2=Pop,29,29,29,41,43,43,41,41,38,29 Item3=Classic,0,0,0,0,0,0,0,-8,-10,-8 [BassManagement] bass_speaker_item_count=5 bass_speaker_item_0=Front large and Others large bass_speaker_item_1=Front large and Others small bass_speaker_item_2=Front small and Others large bass_speaker_item_3=Front small and Others small bass_speaker_item_4=User customizable bass_speaker_item_5=Front large bass_speaker_item_6=Front small bass_speaker_item_7=All large bass_speaker_item_8=All small bass_speaker_item_9=Off bass_subwoofer_item_count=3 bass_subwoofer_item_0=LFE + Bass Out bass_subwoofer_item_1=LFE Only bass_subwoofer_item_2=Bass Out Only bass_lpf_item_count=4 bass_lpf_item_0=40 Hz bass_lpf_item_1=60 Hz bass_lpf_item_2=90 Hz bass_lpf_item_3=110 Hz Default_bBASS_MANAGE_ENABLED=0 Default_CutoffFreq=1 Default_LFESpkr=1 Default_MultiChlCofig_0=1 Default_MultiChlCofig_1=1 Default_MultiChlCofig_2=1 Default_MultiChlCofig_3=0 Default_MultiChlCofig_4=1 Default_MultiChlCofig_5=1 Default_MultiChlCofig_6=1 Default_MultiChlCofig_7=1 [HardwaveFilter] DefaultOption=0Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.