\HELP\NETWARE\CLIENT32.TXT
PLANEX FW-110TX/TXL 10/100M PCI LAN Adapter
---------------------------------------------
Novell Client 32 Driver Installation for DOS/Windows 3.11
---------------------------------------------------------
Client 32 for DOS/ Windows 3.11
-------------------------------
Install DOS Client 32 Driver During Client 32 Installation
----------------------------------------------------------
1. Shut down the computer and install the FW110TX adapter
into the system.
2. At MS-DOS prompt, start the Client 32 installation by executing
the "INSTALL" command.
3. Follow the installation procedure of Novell NetWare Client 32.
4. In "Select a LAN Driver Type" window, select "32-bit" LAN driver.
5. In "32-Bit Network Board Drivers" window, select "USER SPECIFIED
32-BIT DRIVER".
6. In "Insert The Driver Disk" window, input the drive/directory
path to the FW110TX.LAN driver and FW110TX.LDI files on the floppy disk.
eg. A:\NETWARE\Client32
7. Select "PLANEX FW-110TX/TXL 10/100M PCI LAN Adapter" . Select the
desired parameters, eg. NetworkMedia, Frame Type, Node Address,
and continue with the installation procedure.
Note: The LineSpeed default is Auto and the other options are
Media Mode : the default is AUTO. (AUTO,
100FULL, 100HALF, 10FULL, 10HALF,)
8. After the installation, a STARTNET.BAT batch file will be created.
Please check the STARTNET.BAT file for the right parameters.
Install Windows 3.1X Client 32 Driver During Client 32 Installation
-------------------------------------------------------------------
1. In Microsoft Windows environment, run "SETUP" command to start
Client 32 installation.
2. In "ODI Driver Selection" window, select "32 bit" mode and "Other
Boards".
3. Enter the path and filename of the ODI driver in "ODI Driver Path"
window. For exmaple, C:\NETWARE\Client32\FW110TX.LAN.
4. Follow the installation setps of Novell NetWare Client 32.
5. After the installation, a STARTNET.BAT batch file will be created.
Please check the STARTNET.BAT file contains the right parameters.
Install Client 32 Driver After Novell NetWare Client 32 for
DOS/Windows 3.1x is already installed
-----------------------------------------------------------
Copy the LAN driver, FW110TX.LAN, and the LDI file, FW110TX.LDI, from the
\Client32 directory to the \Novell\Client32 directory, and use a text
editor to edit the STARTNET.BAT file directly.
Content of STARTNET.BAT (for 32-bit LAN driver)
-----------------------------------------------
SET NWLANGUAGE=ENGLISH
C:\NOVELL\DOSCLNT\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\FW110TX.LAN FRAME=ETHERNET_802.2 SLOT=??
LOAD C:\NOVELL\CLIENT32\FW110TX.LAN FRAME=ETHERNET_802.3 SLOT=??
LOAD C:\NOVELL\CLIENT32\FW110TX.LAN FRAME=ETHERNET_II SLOT=??
LOAD C:\NOVELL\CLIENT32\FW110TX.LAN FRAME=ETHERNET_SNAP SLOT=??
LOAD C:\NOVELL\CLIENT32\IPX.NLM <-- Binding driver
LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM <-- Finding server
Parameters supported by the FW110TX.LAN o driver
---------------------------------------------------------
SLOT 2 - Forces the driver to search for the specified board
Media Mode : the default is AUTODETECT.
LOAD C:\NOVELL\CLIENT32\FW110TX.LAN MEDIUMTYPE=xx FRAME=ETHERNET_802.2 SLOT=??
LOAD C:\NOVELL\CLIENT32\FW110TX.LAN MEDIUMTYPE=xx FRAME=ETHERNET_802.3 SLOT=??
LOAD C:\NOVELL\CLIENT32\FW110TX.LAN MEDIUMTYPE=xx FRAME=ETHERNET_II SLOT=??
LOAD C:\NOVELL\CLIENT32\FW110TX.LAN MEDIUMTYPE=xx FRAME=ETHERNET_SNAP SLOT=??
LOAD C:\NOVELL\CLIENT32\IPX.NLM <-- Binding driver
LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM <-- Finding server
MEDIUMTYPE=xx: 10HALF
10FULL
100HALF
100FULL
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.