D-Link Support Publishing \Netware\CLIENT32.TXT July 1996
D-Link PCI Family Ethernet Adapter Installation
Netware Client 32 for DOS/Windows 3.1x/Windows 95
Contents
ÄÄÄÄÄÄÄÄ
Introduction
Requirements
Minimum Skill Level
Compatibility List
Getting Started
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
Window 95 offers the easiest installs for any OS/NOS in the industry.
Since it has drivers that are compatible with your PCI Family, using
our drivers is not necessary. There isn't a performance difference
between the built in drivers and our drivers. Each of our PCI Family
reacts differently with Windows 95.
Requirements
ÄÄÄÄÄÄÄÄÄÄÄÄ
A PCI compatible computer
Microsoft's Windows 95
Novell Netware Client 32 for Windows 95 (OR)
Novell Netware Client 32 for DOS (OR)
Novell Netware Client 32 for Windows 3.1x
A PCI Family Series Adapter
A knowledge of basic Win 95 commands and editing text files
Minimum Skill Level
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
A knowledge of basic Win 95 commands
A knowledge of editing text files
A knowledge of Win 95 basic file structure
A knowledge of the network driver configuration being used
Please see Support Options if you are not comfortable with this
skill level
Compatibility List
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Any PCI Family Ethernet Adapter
For a Motherboard compatibility list please consult your local
D-Link Branch Office
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Client 32 for Windows 95
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
NOTE: Please install Novell Netware Client 32 for Windows 95 first.
Method 1: First-time Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
If you have previously installed D-Link DE-530/DFE-500 driver of Novell Netware Client 32
under your Windows 95 system, skip this section and see
"Follow-up Installation" below.
Make sure there is no Network Interface Card plugged on your machine.
Start Windows 95 and get into "Control Panel".
Double click "Network" icon then on "Configuration" screen remove
all items in list box after that click "Add" button.
On "Select Network Component Type" screen click "Adapter" which
locates at list box and then click "Add" button
On "Select Network Adapters" screen click "Have Disk" button.
On "Install From Disk" screen, input the path where the driver locates
ex. A:\CLIENT32.95, if floppy disk is used.
C:\CLIENT32.95, if hard disk is used.
OR
You can click "Browse" button to search for the path where the
driver locates.
Another "Select Network Adapters" will be popped up and the
following list is displayed:
Models:
D-Link DE-530CT PCI Ethernet Adapter
D-Link DE-530T+/DE-530CT+D PCI Ethernet Adapter
D-Link DFE-500TX PCI Fast Ethernet Adapter
Click the card type which you want to installed and click the "OK"
button.
Follow screen instructions until installation is finished.
Don't restart your Windows 95 system right now.
Get into "Control Panel" again.
Double click "Network" icon then at "Configuration" screen remove
all items in list box and click "OK" button.
Power off and insert DE-530/DFE-500 series adapter into machine.
Start Windows 95 and DE-530/DFE-500 adapter will be found.
In "Copying files ..." screen input the path where the driver locates
ex. A:\CLIENT32.95, if floppy disk is used.
C:\CLIENT32.95, if hard disk is used.
Follow screen instructions until installation is finished.
Reboot your system.
Method 2: Follow-up Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
If you are re-installing or updating D-Link DE-530/DFE-500 driver of
Novell Netware Client 32 under your Windows 95 system, follow the
procedure given here. If you have not previously installed
D-Link DE-530/DFE-500 driver of Novell Netware Client 32 under your
Windows 95 system, see "First-time Installation" above.
Power off and insert DE-530/DFE-500 series adapter into machine.
Start Windows 95 and DE-530/DFE-500 adapter will be found.
In "Copying files ..." screen input the path where the driver locates
ex. A:\CLIENT32.95, if floppy disk is used.
C:\CLIENT32.95, if hard disk is used.
Follow screen instructions until installation is finished.
Reboot your system.
TroubleShooting
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
If you experience the warning messages displayed when system reboot
"Command Line Parameter Prompt for DLKPCI" then follow the
instructions as below:
Start Windows 95 and get into "Control Panel".
Double click "Network" icon then on "Configuration" screen click
the driver instlled before which is listed in the list box then
click the "Properities" button.
On "Properities" screen click "Adavanced" menu item.
On "Adavanced" screen click "slot" in the list box and set
value=1 (if the first driver instance, value=2 if the second one
and so on).
Reboot your system.
Client 32 for DOS/Windows 3.1x
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Method 1: Install Driver During Install
Novell Netware Client 32 for DOS/Windows 3.1x
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Follow the installation setps of Novell Netware Client 32 for
DOS/Windows 3.1x.
When 'Insert the NETWARE CLIENT 32 FOR DOS/WINDOWS 3.1x DISK 5 -
LAN DRIVER' diskette ...etc. is prompted insert the desired
diskette and on "Insert The Driver Disk" screen input the path
where the driver locates:
ex. A:\CLIENT32, if floppy disk is used.
C:\CLIENT32, if hard disk is used.
Select the desired parameters and continue the installation procedure.
After the installation is finished the following files will be created:
"\NOVELL\DOSCLNT" is Client32 for DOS/Windows 3.1x installation path.
Content of STARTNET.BAT (for 32-bit LAN driver)
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
SET NWLANGUAGE=ENGLISH
C:\NOVELL\DOSCLNT\NIOS.EXE
LOAD C:\NOVELL\DOSCLNT\LSLC32.NLM
LOAD C:\NOVELL\DOSCLNT\CMSM.NLM
LOAD C:\NOVELL\DOSCLNT\ETHERTSM.NLM
LOAD C:\NOVELL\DOSCLNT\DLKPCI.LAN FRAME=ETHERNET_802.2
LOAD C:\NOVELL\DOSCLNT\DLKPCI.LAN FRAME=ETHERNET_802.3
LOAD C:\NOVELL\DOSCLNT\DLKPCI.LAN FRAME=ETHERNET_II
LOAD C:\NOVELL\DOSCLNT\DLKPCI.LAN FRAME=ETHERNET_SNAP
LOAD C:\NOVELL\DOSCLNT\IPX.NLM <-- Binding driver
LOAD C:\NOVELL\DOSCLNT\CLIENT32.NLM <-- Finding server
Content of STARTNET.BAT (for 16-bit LAN driver)
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
SET NWLANGUAGE=ENGLISH
C:\NOVELL\DOSCLNT\NIOS.EXE
C:\NOVELL\DOSCLNT\LSL.COM
C:\NOVELL\DOSCLNT\N16ODI.COM
C:\NOVELL\DOSCLNT\NESL.COM
C:\NOVELL\DOSCLNT\DLKPCI.COM
LOAD C:\NOVELL\DOSCLNT\LSLC32.NLM
LOAD C:\NOVELL\DOSCLNT\PC32MLID.LAN
LOAD C:\NOVELL\DOSCLNT\TCPIP.NLM
LOAD C:\NOVELL\DOSCLNT\IPX.NLM <-- Binding driver
LOAD C:\NOVELL\DOSCLNT\CLIENT32.NLM <-- Finding server
Content of NET.CFG
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Link Driver DLKPCI
Frame Ethernet_802.2
Frame Ethernet_802.3
Frame Ethernet_II
Frame Ethernet_SNAP
NetWare DOS Requester
FIRST NETWORK DRIVE = I
NETWARE PROTOCOL = NDS BIND
NOTE: You can run the Netware client installation program for each
workstation type from the CLIENT directory under SYS:PUBLIC or
directly from the CD-ROM.
Method 2: Install Driver After Novell Netware Client 32 for
DOS/Windows 3.1x is Installed
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Use text editor to edit STARTNET.BAT directly.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.