Thank you for purchasing an Epson printer. This document contains notes regarding your new printer. ------------------------------------------------------------------------------------ README file for EPSON AL Series Printer Driver for Microsoft(R) Windows(R) 95, Windows(R) 98, Windows(R) Me, Windows NT(R) 4.0, Windows(R) 2000 and Windows(R) XP ------------------------------------------------------------------------------------ [Contents] 1. Introduction 2. Important legal information 3. Install notes 4. Notes regarding printing ------------------------------------------------------------------------------------ 1. Introduction This document contains information that you should be aware of when printing with Windows. 2. Important legal information Software called the EPSON AL Series Printer Driver (the "Software") is provided "AS IS." NO IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE ARE GIVEN. The Software may be copied and distributed without charge only to users of EPSON brand printers. All files on the disk must be copied without modification, including all proprietary marks and notices. All components of the Software must be distributed together. The Software may not be distributed for profit. Copyright (c) 2000 SEIKO EPSON CORPORATION 3. Install notes Run setup.exe in setup directory on each Operating System. make sure that, *all other applications are closed, and all print jobs are finished before installing the printer driver. *when asked by the install program whether you wish to "Keep existing driver" OR "Replace existing driver", always select the replace option. 4. Notes regarding printing (1) 1200 dpi Some applications don't support printing with 1200 dpi; therefore, if you do not get good results printing with "1200 dpi" selected as the Print Quality setting on the Basic tab, try selecting "600 dpi (Fine)" or "300 dpi (Fast)" and then printing again. (2) Setting Up Drivers From Within Applications Print setup is not available from within some applications. Setting print conditions for the driver from these applications will have no effect on printing. When using applications that do not support print setup, print only after setting the driver print conditions from the Control Panel. (3) Zoom Options Printing The edges of the original may not be printed in the Zoom Options modes. Make sure that sufficient space is available for the left, right, top and bottom margins when printing in these modes. (4) Collate in Printer When using the collate function, follow the steps below. 1.Install 64 MB or more memory in the printer and set the correct memory size in Installed Memory on the driver [Optional Settings] dialog box. 2.Turn "Collate in Printer" on in the [Basic Settings] tab in the printer driver. If you have any problems printing in the function, turn the Collate option off in applications that can select collate from the print dialog box. (5) Some applications may not produce the desired print results. Changing the print mode with the printer driver may produce the desired results in such cases. To change the print mode: 1. Click [Start] on the task bar, select [Settings], and then select [Printers]. 2. Click the icon of the printer to be altered, and select [Properties] from the [File] menu. 3. Click the [Basic Settings] tab and select [Advanced]. Select the [More Settings] button, and click it to open the [More Settings] dialog box. 4. Select the desired mode from the [Printing Mode] list in the [More Settings] dialog box. If you don't obtain the desired print results in the High Quality(PC) mode, select the High Quality(Printer) mode or the CRT mode. * Gradations of color may not be match the screen with some graphics-based applications. In such cases, changing from Photo-Realistic Accent to other settings in the Mode in [More Settings] dialog box may produce the desired result. To change the Color Adjustment, open the [More Settings] dialog box as described above, and select the method from [Mode]. * When using the various font modification functions in word processor applications select [Print TrueType fonts as bitmap] in the [Extended Settings] dialog box on the [Optional Settings] tab in the printer driver. * If you have problems with output from Adobe applications, turn Adobe Type Manager off, and print again. (6) Euro Symbol Printing The printer driver supports Euro Symbol with the following internal printer fonts; Courier SWC Dutch 801 SWM Swiss 721 SWM Dutch 801 SWC Zapf Humanist 601 SWC Ribbon 131 SWC Clarendon Condensed SWC Swiss 742 SWC Swiss 742 Condensed SWC Incised 901 SWC Original Garamond SWC Audrey Two SWC Flareserif 821 SWC Flareserif 821 Extra Bold SWC Letter Gothic SWC ITC Avant Garde SWA ITC Bookman SWA Courier SWA Swiss 721 SWA Swiss 721 Narrow SWA Century Schoolbook SWA Zapf Calligraphic 801 SWA Dutch 801 SWA ITC Zapf Chancery SWA ITC Zapf Dingbats SWA If you have problems print in Euro Symbols, check the Font Substitution Table of the printer driver. You can print Euro Symbols without using internal printer fonts if you have screen fonts which support the Euro Symbol in your system. To do that, change "TrueType fonts with substitution" to "Print TrueType fonts as bitmap" in the [Extended Settings] dialog box on the [Optional Settings] tab of the printer driver before you print. ------------------------------------------------------------------------------------ Microsoft is registered trademark and Windows is registered trademark of Microsoft Corporation in the United States and other countries. Product and Company names listed in this document are all registered trademarks of their respective Companies. ------------------------------------------------------------------------------------ This README file contains the latest information about your EPSON product. 2/7/2002 --------------------------------------------------------------------- 1. General troubleshooting solutions 1-1. If a Windows shared printer cannot be monitored, check the following: *Make sure that the printer driver is installed on the computer that is hosting the Windows shared printer and that, in the printer driver, the printer is set to be shared. Also make sure that "Allow monitoring of shared printers" is selected in the Monitoring Preferences dialog box. *(Windows Me/98/95) On the server, double-click the Network icon in Control Panel and make sure that the "File and printer sharing for Microsoft Networks" component is installed. Then, on the server AND clients, make sure that the "IPX/SPX-compatible Protocol" or the "TCP/IP Protocol" is installed. *On the server and clients, make sure that Printer Interface version 4.xxx or later is installed. To confirm the version of Printer Interface, open the EPSON Status Monitor 3 dialog box and click the icon on the left side of the EPSON Status Monitor 3 title bar. Select "About..." from the menu and confirm the version in the "Aboutc" message box that appears. 1-2. Limitation when monitoring network printers in a Windows 95 environment Windows Socket 2 must be installed. Windows Socket 2 is available from Microsoft Corporation. 1-3. If network printers cannot be monitored after returning from sleep mode in a Windows 95 environment, do the following: Close the printer driver and EPSON Status Monitor 3, then restart the Status Monitor. For information on accessing the Status Monitor, see your printer's Reference Guide. 2. Solutions for Windows XP/2000/NT environment 2-1. When uninstalling EPSON Status Monitor 3 from a multi-user Windows XP/2000/NT environment, remove the shortcut icon from all clients before uninstalling. You can remove the icon by clearing the Shortcut Icon check box in the Monitoring Preferences dialog box. 3. Solutions for network printers 3-1. To monitor a NetWare printer, connect only one print server to each queue. For directions, see the Administrator's Guide for the printer. 3-2. You cannot monitor a NetWare queue printer beyond the IPX router because the setting for IPX hops is 0. 3-3. When monitoring NetWare printers, a Novell Client that corresponds to your operating system must be used. Operation is confirmed for the versions below. *For Windows Me/98/95: Novell Client 3.31 for Windows 95/98 *For Windows 2000/NT 4.0: Novell Client 4.81 for Windows NT/2000 3-4. Limitation when monitoring NetWare printers This product supports NetWare printers configured by a queue-based printing system such as Bindery or NDS. You cannot monitor NDPS (Novell Distributed Print Services) printers. 4. Job Management Function 4-1. Connections that support the Job Management function *EpsonNet Direct Print TCP/IP connections in Windows XP/Me/98/95/ 2000/NT 4.0. *LPR connections in Windows XP/2000/NT 4.0. *Standard TCP/IP connections in Windows XP/2000. *Shared Windows 2000/NT 4.0 LPR connections and shared Windows 2000 Standard TCP/IP connections with Windows XP/Me/98/95/2000/NT 4.0 clients. Note that if the user account used to log on to a client is different from the user account used to connect to the server, the Job Management function is not available. Shared Windows XP LPR connections and shared Windows XP Standard TCP/IP connections with Windows clients do not support the Job Management function. 4-2. NetWare connections do not support the Job Management function. 4-3. "Monitor the printing status" must be selected on the printer driver's Utility tab in order to use the "Notify when printing completed" function. On condition that the client logon user is different from the connecting user for the server, the Job Management function is not available. --------------------------------------------------------------------- General notice: Product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks. (C)SEIKO EPSON CORPORATION 2002 ENDDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.