;*********************************************************************** ; ; OEMSETUP.INF ; ; Cisco Systems Wireless LAN Adapter Setup for NT 4.0/3.51 ; ; History: ; 09/28/97 Initial version written by Ned Nassar ; ;******************************************************************************* [Identification] OptionType = NetAdapter [PlatformsSupported] PCI [Options] PCI504 ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ [FileConstants] UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "Cisco" ProductMajorVersion = "1" ProductMinorVersion = "00" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "PCX504" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\PCX504.sys" NetRuleSoftwareType = "PCX504Sys ndisDriver PCX504Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """PCX504Sys"" yes no container" NetRuleSoftwareClass = {"PCX504Driver basic"} NetRuleSoftwareBindable = {"PCX504Driver PCX504Adapter non exclusive 100"} ProductHardwareName = "PCX504" RadioName = "PCX504" NetRuleHardwareBindForm = " yes yes container" ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" ; NetRuleHardwareType = "PCX504 PCX504Adapter" NetRuleHardwareClass = {"PCX504Adapter basic"} ; ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = a:\ NT350VersionConstant = "3.50" NT310VersionConstant = "3.10" NDIS4FOLDER = NDIS4 ManufacturerName = "Cisco Systems" [PCX504Defaults] InfrastructureModeValue = 1 NetworkAddressValue = "" NodeNameValue = "" PSPValue = 0 SSIDValue1 = "" SuppRatesValue = 0 [PCX504PMDefaults] InstallPMDriver = 0 ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ [date] Now = {} ? $(!LIBHANDLE) GetSystemDate ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) ; Ifcontains(i) $($0) in $(LanguageList) ; ifstr(i) $($1) == "" goto returnoptions endif ; set PlatformList = ^(PlatformsSupported, 1) ; Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif ; else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif ;------------------------------------------------------------------------------ returnoptions = + Debug-Output "-------------------------returnoptions ------------------------" set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL ;------------------------------------------------------------------------------ finish_ReturnOptions = + Debug-Output "-------------------------finish_ReturnOptions ------------------------" Return $(Status) $(OptionList) $(OptionTextList) ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ [InstallOption] set Status = STATUS_FAILED set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) Set !DebugOutputControl = 1 ;REN REN REN set LanguageList = ^(LanguagesSupported, 1) ; Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif ; set-subst LF = "\n" read-syms GeneralConstants Ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" set NDIS4FOLDER = "" ;for unattended--no directory structure needed endif read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ; ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif ; read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL set PCMCIA = 0 set PCI = 0 set PNPISA = 0 set DialogDllName = "pcx500.dll" Ifstr(i) $($1) == "PCI504" ;=================================================== set CFID = 42244 ;; 0xA504 ; set CFID = 20480 ;; 0x5000 set Vendor = 5305 ;; 14B9 i;;--------- set ProductHardwarePCI504Title = "Cisco Systems mini-PCI Wireless LAN Adapter" set ProductHardwarePCI504Description = "Cisco Systems mini-PCI Wireless LAN Adapter" set NetRuleHardwarePCI504Type = "PCX504 PCX504Adapter" set NetRuleHardwarePCI504Class = {"PCX504Adapter basic"} set AdapterPCI504Type = 5 ;; PCI board set CardOption = "PCI4800" set DLLBUSTYPE = 5 set PCI = 1 set BusInterfaceType = 5 set CardType = 3 set FormFactorValue = "PCI" endif ; EndWait ;------------------------------------------------------------------------------ Begin = + Debug-Output "-------------------------Begin ------------------------" Set ActivateDetection = FALSE OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt Ifstr(i) $(KeyNt) != "" GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue Debug-Output "$(InfFile) $(Option): WinNT CurrentVersion ="$(CurrentVersionValue) CloseRegKey $(KeyNt) Endif ifstr(i) (*($(CurrentVersionValue),4)) == $(NT310VersionConstant) ;; NT v3.10 not supported! Debug-Output "$(InfFile) $(Option): Configureadapter" set Error = "Windows NT v3.10 is not support by this product" goto fatal endif ; Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter ; else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware ; else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter ; else-Ifstr(i) $(!NTN_InstallMode) == configure set CommonStatus = STATUS_REBOOT ; set ActivateDetection = TRUE set StartLabel = configureadapter ; Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "Cannot configure the PCX504 driver software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ; ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ; set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else ; set ActivateDetection = TRUE set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif ; Debug-Output "PCX504.INF: ==================================================" Debug-Output "PCX504.INF: STF_CWDIR is: "$(!STF_CWDIR) Debug-Output "PCX504.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE) Debug-Output "PCX504.INF: Option is: "$(Option) Debug-Output "PCX504.INF: !STF_NCDETECT is: "$(!STF_NCDETECT) Debug-Output "PCX504.INF: !STF_NCOPTION is: "$(!STF_NCOPTION) Debug-Output "PCX504.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD) Debug-Output "PCX504.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO) Debug-Output "PCX504.INF: ==================================================" ; set the default values ; ; set ATTRIBMEMSIZE = 0x0400 set COMNMEMSIZE = 0x0000 Shell "" DebugConfiguration "After parameter default setting" Set from = $(fatal) Set to = $(fatal) Goto $(StartLabel) ;------------------------------------------------------------------------------ installadapter = + Debug-Output "-------------------------installadapter ------------------------" OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else ; Adding a new adapter is no problem, so don't bug the user ; Shell $(UtilityInf), CardExistedDlg ; ifint $($ShellCode) != $(!SHELL_CODE_OK) ; Debug-Output "ShellCode error: cannot get an error string." ; goto ShellCodeError ; endif ; ifstr(i) $($R1) != "OK" ; set CommonStatus = STATUS_USERCANCEL ; goto end ; endif set OldVersionExisted = $(TRUE) endif endif Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO ; Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError ; Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal ; Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif ; Set SrcDir = $($R1) install "Install-Dll" Ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" shell $(!STF_WINDOWSPATH)\inf\cadvals.inf SectionPCI504PM ifint $($ShellCode) == $(!SHELL_CODE_OK) set InstallPMDriver = $($R0) else read-syms PCX504PMDefaults endif else read-syms PCX504PMDefaults endif ifint $(InstallPMDriver) == $(TRUE) install "Install-PmDriver" OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\ciscotp" $(MAXIMUM_ALLOWED) CiscoTpKey ifstr $(CiscoTpKey) != $(NULL) ; open succeeded, so delete it CloseRegKey $(CiscoTpKey) DeleteRegTree $(!REG_H_LOCAL) "SYSTEM\CurrentControlSet\Services\ciscotp" endif CreateRegKey $(!REG_H_LOCAL) {"SYSTEM\CurrentControlSet\Services\ciscotp", 0, GenericClass} "" $(!REG_KEY_SET_VALUE) "" CiscoTpKey SetRegValue $(CiscoTpKey) {ErrorControl, 0, $(!REG_VT_DWORD), 1} SetRegValue $(CiscoTpKey) {Group, 0, $(!REG_VT_SZ), "Extended Base"} SetRegValue $(CiscoTpKey) {Start, 0, $(!REG_VT_DWORD), 2} SetRegValue $(CiscoTpKey) {Type, 0, $(!REG_VT_DWORD), 1} CloseRegKey $(CiscoTpKey) endif goto adaptersetup ;------------------------------------------------------------------------------ configureadapter = + Debug-Output "-------------------------configureadapter ------------------------" Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct ; Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif ; Endif ; Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) ; Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "PCX504.INF: FindService shell failure" Goto ShellCodeError Endif ; Ifstr(i) $($R0) != NO_ERROR Debug-Output "PCX504.INF: FindService Shell error: "$($R0) Goto fatalregistry endif ; Set KeyParameters = $($R2) CloseRegKey $($R1) ; Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) ; ;------------------------------------------------------------------------------ adaptersetup = + Debug-Output "-------------------------adaptersetup ------------------------" Shell "" DebugConfiguration "before displaying dialog" Set from = adapteroptions adapteroptions = + Debug-Output "-------------------------adapteroptions ------------------------" ;; raf Ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" set Result = "CONTINUE" shell $(!STF_WINDOWSPATH)\inf\cadvals.inf SectionPCI504 ifint $($ShellCode) == $(!SHELL_CODE_OK) set InfrastructureModeValue = $($R0) set NetworkAddressValue = $($R3) set NodeNameValue = $($R4) set PSPValue = $($R5) set SSIDValue1 = $($R6) set SuppRatesValue = $($R7) goto foundINF else read-syms PCX504Defaults goto foundINF endif endif LoadLibrary "" $(!STF_WINDOWSSYSPATH)\$(DialogDllName) hLib read-syms FileDependentDlg$(!STF_LANGUAGE) ;;;------------------------------------------new Ifstr(i) $(StartLabel) == configureadapter Debug-Output "adaptersetup:configureadapter" set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ; ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) ifstr(i) $(ValueName) == "SoftexPcmcia" set SoftexPcmcia = $(ValueData) endif ifstr(i) $(ValueName) == "FormFactor" ; ifstr(i) $(ValueData) == "ISA" ; set CardOption = "ISA4800" ; else-ifstr(i) $(ValueData) == "PCI" ; set CardOption = "PCI4800" ; else ; set CardOption = "PCMCIA4800" ; endif set CardOption = "PCI4800" LibraryProcedure Result $(hLib) SetCardOption $(CardOption) endif EndForListDo ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) ifstr(i) $(ValueName) == "BusType" set BusInterfaceType = $(ValueData) endif ifstr(i) $(ValueName) == "NetworkAddress" set NetworkAddressValue = $(ValueData) endif Debug-Output "SetValue---> "$(ValueName)" = "$(ValueData) LibraryProcedure Result $(hLib) SetValue $(ValueName) $(ValueData) EndForListDo LibraryProcedure Result $(hLib) AdapterReconfig $(CardOption) else LibraryProcedure Result $(hLib) AdapterSetup $(CardOption) Endif ifint $(PCI) != 1 LibraryProcedure IoBaseAddressValue $(hLib) GetValue IoBaseAddress LibraryProcedure IRQValue $(hLib) GetValue InterruptNumber endif ; LibraryProcedure InfrastructureModeValue $(hLib) GetValue InfrastructureMode LibraryProcedure PSPValue $(hLib) GetValue PowerSaveMode LibraryProcedure SuppRatesValue $(hLib) GetValue SupportedRates, LibraryProcedure SSIDValue1 $(hLib) GetValue SSID1 ;;LibraryProcedure NetworkAddressValue $(hLib) GetValue NetworkAddress LibraryProcedure NodeNameValue $(hLib) GetValue NodeName ; Debug-Output "PcmciaDriverValue" LibraryProcedure PcmciaDriverValue $(hLib) IsSoftexPcmcia ;;;-------------------------------------------end of new FreeLibrary $(hLib) ; foundINF = + ifstr(i) $(Result) == "CONTINUE" Debug-Output "CONTINUE" else-ifstr(i) $(Result) == "EXIT" set CommonStatus = STATUS_USERCANCEL goto end else goto end endif ifint $(PCMCIA) == 0 ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif goto installnonpcmcia endif ; ;------------------------------------------------------------------------------ skipoptions =+ Debug-Output "-------------------------skipoptions ------------------------" ifint $(OldVersionExisted) == $(TRUE) ; ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif ; endif ; StartWait ; ifint $(OldVersionExisted) == $(FALSE) ; ifstr(i) $(!NTN_InstallMode) == "install" ; Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError ; Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ; ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ; set Error = $($R0) Goto fatal ; Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif ; Set SrcDir = $($R1) Endif install "Install-Option" ; ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ; ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ; set Error = $($R0) goto fatal endif endif ; Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ; ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif ; set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) ; Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&" Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif ; set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ; ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif ; set RegistryErrorIndex = $($R0) ; Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ; ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif ; set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) ; Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif ; endif ; Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ; ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif ; set RegistryErrorIndex = $($R0) ; Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif ; set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ; ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif ; CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ; ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif ; set RegistryErrorIndex = $($R0) ; Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif ; CloseRegKey $(KeyAdapterRules) goto writeparameters ;------------------------------------------------------------------------------- ; Set MemSizeValue = 8192 ; Set MemOffsetValue = 0 ; Set AttributeMemSize = 128 ; Set AttributeMemAddress = 851968 ; Set AttributeMemOffset = 0 writeparameters = + Debug-Output "-------------------------writeparameters ------------------------" ;wtf set CardType = 3 Set NewValueList = {+ {BusType, $(NoTitle),$(!REG_VT_DWORD), $(BusInterfaceType)},+ {CardType, $(NoTitle),$(!REG_VT_DWORD), $(CardType)},+ {FormFactor, $(NoTitle),$(!REG_VT_SZ), $(FormFactorValue)},+ {IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD), $(IoBaseAddressValue)},+ {InterruptNumber, $(NoTitle),$(!REG_VT_DWORD), $(IRQValue)},+ {InfrastructureMode,$(NoTitle),$(!REG_VT_DWORD), $(InfrastructureModeValue)},+ {PowerSaveMode, $(NoTitle),$(!REG_VT_DWORD), $(PSPValue)},+ {SupportedRates, $(NoTitle),$(!REG_VT_DWORD), $(SuppRatesValue)},+ {SSID1, $(NoTitle),$(!REG_VT_SZ), $(SSIDValue1)},+ {RadioName, $(NoTitle),$(!REG_VT_SZ), $(RadioName)},+ {NetworkAddress, $(NoTitle),$(!REG_VT_SZ), $(NetworkAddressValue)},+ {NodeName, $(NoTitle),$(!REG_VT_SZ), $(NodeNameValue)}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif ifint $(PCMCIA) == 0 goto successful endif ;;ifint $(SoftexPcmcia) == 1 ;; Set NewValueList = {+ ;; {SoftexPcmcia, $(NoTitle),$(!REG_VT_DWORD), $(PCMCIA)}} ;;else ;; Set NewValueList = {+ ;; {Pcmcia, $(NoTitle),$(!REG_VT_DWORD), $(PCMCIA)}} ;;endif ;;;;Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ;---------------------- Set NewValueList = {+ {$(PcmciaDriverValue), $(NoTitle),$(!REG_VT_DWORD), $(PCMCIA)}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ;---------------------- ;;Set NewValueList = {+ ;; {SoftexPcmcia, $(NoTitle),$(!REG_VT_DWORD), $(PCMCIA)}} ;;Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ;++++++++++++++++++++++ Set NewValueList = {+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ } Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ;++++++++++++++++++++++ ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif ; set PCMCIADatabaseKeyName = $(!NTN_ServiceBase)"\Pcmcia\DataBase" Debug-Output "Opening PCMICA database key "$(PCMCIADatabaseKeyName) OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseKeyName) $(MAXIMUM_ALLOWED) PCMCIADatabaseKey ; ifstr $(PCMCIADatabaseKey) == $(NULL) Debug-Output "Pcmcia\DataBase not present" else ; PCMCIA.sys is installed and registry has database section in it. ; Try to open Aironet section. Delete it if found ;;OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseKeyName)"\Aironet" $(MAXIMUM_ALLOWED) PCMCIADatabaseAironetKey OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseKeyName)\$(ManufacturerName) $(MAXIMUM_ALLOWED) PCMCIADatabaseAironetKey ifstr $(PCMCIADatabaseAironetKey) != $(NULL) ; ;----------------------------------------------------------------------------------------------- ;;OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseAironetKey)"\PCX504" $(MAXIMUM_ALLOWED) PCMCIADatabaseAironetPCX504Key OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseAironetKey)\$(CISProductName) $(MAXIMUM_ALLOWED) PCMCIADatabaseAironetPCX504Key ifstr $(PCMCIADatabaseAironetPCX504Key) != $(NULL) ; open succeeded, so delete it CloseRegKey $(PCMCIADatabaseAironetPCX504Key) ;;DeleteRegTree $(PCMCIADatabaseAironetKey) "PCX504" ; bye bye! DeleteRegTree $(PCMCIADatabaseAironetKey) $(CISProductName) ; bye bye! endif ;;CreateRegKey $(PCMCIADatabaseAironetKey) {"PCX504", 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseAironetPCX504Key CreateRegKey $(PCMCIADatabaseAironetKey) {$(CISProductName), 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseAironetPCX504Key SetRegValue $(PCMCIADatabaseAironetPCX504Key) {DeviceType, 0, $(!REG_VT_SZ),"NET"} SetRegValue $(PCMCIADatabaseAironetPCX504Key) {Driver, 0, $(!REG_VT_SZ),"PCX504"} CloseRegKey $(PCMCIADatabaseAironetPCX504Key) ;----------------------------------------------------------------------------------------------- CloseRegKey $(PCMCIADatabaseAironetKey) ;endif else ;;CreateRegKey $(PCMCIADatabaseKey) {"Aironet", 0, 0} "" $(MAXIMUM_ALLOWED) "" PCMCIADatabaseAironetKey CreateRegKey $(PCMCIADatabaseKey) { $(ManufacturerName), 0, 0} "" $(MAXIMUM_ALLOWED) "" PCMCIADatabaseAironetKey ;;CreateRegKey $(PCMCIADatabaseAironetKey) {"PCX504", 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseAironetPCX504Key CreateRegKey $(PCMCIADatabaseAironetKey) {$(CISProductName), 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseAironetPCX504Key SetRegValue $(PCMCIADatabaseAironetPCX504Key) {DeviceType, 0, $(!REG_VT_SZ),"NET"} SetRegValue $(PCMCIADatabaseAironetPCX504Key) {Driver, 0, $(!REG_VT_SZ),"PCX504"} CloseRegKey $(PCMCIADatabaseAironetPCX504Key) CloseRegKey $(PCMCIADatabaseAironetKey) endif CloseRegKey $(PCMCIADatabaseKey) ; ; ;;;raf ; ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" ; Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters) ; endif ; CloseRegKey $(KeyParameters) ; ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif ; set RegistryErrorIndex = $($R0) ; Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif ; EndWait goto successful ;------------------------------------------------------------------------------- ;;installproduct =+ installnonpcmcia = + Debug-Output "-------------------------installnonpcmcia ------------------------" Debug-Output "$(InfFile) $(Option): installproduct" StartWait set AdapterList = $($R1) ifint $(OldVersionExisted) == $(FALSE) Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif ; ; Check to see if the Product Software key exists already in the system service keys ; before we try to add the software component. ; OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_READ) KeyNt CloseRegKey $(KeyNt) Ifstr(i) $(KeyNt) == "" Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) goto fatalregistry endif Set SoftProductKey = $($R1) Set SoftNetRuleKey = $($R2) Set SoftServiceKey = $($R3) Set SoftParameterKey = $($R4) Set SoftLinkageKey = $($R5) set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait goto fatalregistry endif endif ;; Does Services\PCX504 exist? ;;*************************************************************************************************** ;; If we are eisa, then use the EISA Enum routines to figure out how many boards we have in ;; the system. ;; ;; If we are PCI and we are v3.51 and above, we can use the PCI dection routines to figure ;; out where all the boards are (hopefully including different buses) and generate the correct ;; reg. entries. ;; ;;*************************************************************************************************** ;; ;; Are we installing an ISA , PCI or PCMCIA ;; set NTDetected = $(FALSE) ifint $(ISA) == 1 ;;ISA_BEGIN.......................................................................... Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), + $(DetectedSlotNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) == "YES" set InstallCard = "NO" ;; Don't want to re-install, it's there already endif ifstr(i) $(InstallCard) == "NO" Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) goto copyInstallationFiles endif ;------------------------------------------------------------------------ Debug-Output "$(InfFile) $(Option): Installing Card at $(DetectedBusNum):$(DetectedSlotNum)!" Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif Set HardNetCardKey = $($R1) Set HardNetRuleKey = $($R2) ;Set HardParameterKey = $($R3) Set KeyParameters = $($R3) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ; ; Set NewValueList = {+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+ {CardType,$(NoTitle),$(!REG_VT_DWORD),$(CardType)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ } Debug-Output "$(InfFile) $(Option): Set HardwareParameterKey = $(NewValueList)" ;;Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Debug-Output "$(InfFile) $(Option): HardwareRuleKey = $(NewValueList)" Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(HardNetCardKey) CloseRegKey $(HardNetRuleKey) goto copyInstallationFiles ;;ISA_END.......................................................................... else-ifint $(PCI) == 1 ;; ;; No, Then we must be installing a PCI card. ;; ;; Note: If we are are on WinNT v3.51 and above, we have PCI detection support ;; and are able to setup the adapter without user intervention. Otherwise, we can ;; only do one card at a time. ;; set TargetVersion = *($(CurrentVersionValue),4) Debug-Output "$(InfFile) $(Option): Current Version:"$(TargetVersion) ifstr $(TargetVersion) == $(NT350VersionConstant) ;; We need to ask on v3.50 Debug-Output "Running on WindowsNT 3.50" set Version350 = $(TRUE) else Debug-Output "Running on WindowsNT 3.51" set Version350 = $(FALSE) endif ifint $(Version350) == $(TRUE) Debug-Output "Running on WindowsNT v3.50, Not using PCI Detection!!!" ifstr $(!STF_GUI_UNATTENDED) == "YES" Debug-Output "$(InfFile) $(Option): Running in GUI unattended mode" ifstr(i) $(!AutoNetInterfaceType) != "" set BusInterfaceType = $(!AutoNetInterfaceType) else set BusInterfaceType = 5 endif ifstr(i) $(!AutoNetBusNumber) != "" set BusNumber = $(!AutoNetBusNumber) else set BusNumber = 0 endif set NTDetected = $(FALSE) set AdapterList = $(Option) ;; 1 Item to install Debug-Output "$(InfFile) $(Option): BusInterfaceType = $(BusInterfaceType)" Debug-Output "$(InfFile) $(Option): BusNumber = $(BusNumber)" else Debug-Output "$(InfFile) $(Option): Running 3.50 Bus Dialog" set BusInterfaceType = 5 set BusNumber = 0 set NTDetected = $(FALSE) Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set BusInterfaceType = $($R1) set BusNumber = $($R2) set AdapterList = $(Option) ;; 1 Item to install Debug-Output "$(InfFile) $(Option): BusInterfaceType = $(BusInterfaceType)" Debug-Output "$(InfFile) $(Option): BusNumber = $(BusNumber)" endif else Debug-Output "$(InfFile) $(Option): Running 3.51 using PCI Dectection" ;; ;; v3.51 has PCI detection code built in. ;; ;;set BusInterfaceType = 5 ;;set BusNumber = 0 ;; Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber) set NTDetected = $(TRUE) Debug-Output "$(InfFile) $(Option): VendorID = $(Vendor)" Debug-Output "$(InfFile) $(Option): CFID = $(CFID)" Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CFID) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif Debug-Output "DetectedBusNum: "*($($),1) Debug-Output "DetectedSlotNum:"*($($),2) ifstr(i) $($R0) == {} set CFID = 20480 ;; 0x5000 Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CFID) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R0) == {} ;;;---- Shell $(UtilityInf), GetPCIInformation, $(Vendor) 1 ;;generic id ifstr(i) $($R0) == {} ;;;---- set Error = $(CANNOT_FIND_ANY_CARD) set CommonStatus = USER_CANCEL set from = end goto nonfatal endif endif endif Debug-Output "DetectedBusNum: "*($($),1) Debug-Output "DetectedSlotNum:"*($($),2) set AdapterList = $($R0) endif ;;; NT v3.50 endif ;;; Looking for PCI cards in Option. ; "AdapterList" has the list of currently installed adatpers in the system! ; Debug-Output "$(InfFile) $(Option): Adapterlist = $(AdatperList)" ForListDo $(AdapterList) Set InstallCard = "YES" ifint $(NTDetected) == $(TRUE) set DetectedBusNum = *($($),1) set DetectedSlotNum = *($($),2) Debug-Output "$(InfFile) $(Option): DetectedBusNumber = $(DetectedBusNum)" Debug-Output "$(InfFile) $(Option): DetectedSlotNum = $(DetectedSlotNum)" Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), + $(DetectedSlotNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) == "YES" set InstallCard = "NO" ;; Don't want to re-install, it's there already endif endif ;; ;; Are we installing the card? ;; ifstr(i) $(InstallCard) == "NO" Debug-Output "$(InfFile) $(Option): Card Already at $(DetectedBusNum):$(DetectedSlotNum) already installed!" set Error = "An adapter at $(DetectedBusNum):$(DetectedSlotNum) is already installed!" Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif else Debug-Output "$(InfFile) $(Option): Installing Card at $(DetectedBusNum):$(DetectedSlotNum)!" Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif Set HardNetCardKey = $($R1) Set HardNetRuleKey = $($R2) ;Set HardParameterKey = $($R3) Set KeyParameters = $($R3) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ; ; Are we installing ISA, PCI, PCMCIA? ; ifint $(ISA) == 1 set CardType = 1 set BusTypeNum = 1 set Bus = "ISA" else-ifint $(PCI) == 1 ; set CardType = 2 set CardType = 3 set BusTypeNum = 5 set Bus = "PCI" endif ;; ;; If we used the OS to dected the card, then we already know bus and slot information. ;; ifint $(NTDetected) == $(TRUE) set BusNumber = $(DetectedBusNum) set SlotNum = $(DetectedSlotNum) set BusInterfaceType = $(BusTypeNum) ; ; Note: we need to record SlotNumber too so that we can use the ; "IsNetCardAlreadyInstalled" routine. ; Set NewValueList = {+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)}+ } ;;Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif else Set NewValueList = {+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ } ;;Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif Set NewValueList = {+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+ {CardType,$(NoTitle),$(!REG_VT_DWORD),$(CardType)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ } Debug-Output "$(InfFile) $(Option): Set HardwareParameterKey = $(NewValueList)" ;;Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Debug-Output "$(InfFile) $(Option): HardwareRuleKey = $(NewValueList)" Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(HardNetCardKey) CloseRegKey $(HardNetRuleKey) endif EndForListDo EndWait ;--------------------------------------------------------------------------- ;;ISA_BEGIN............. copyInstallationFiles =+ ;;ISA_END............... ;--------------------------------------------------------------------------- Debug-Output "-------------------------copyInstallationFiles-------------------" ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif ;;ISA_BEGIN..................... ifstr(i) $(!NTN_InstallMode) == "install" goto writeparameters endif ;;ISA_END....................... endif ; StartWait ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif goto writeparameters endif ;------------------------------------------------------------------------------- bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal ;------------------------------------------------------------------------------- removeadapter = + Debug-Output "-------------------removeadapter-----------------------" Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct ; Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif ; Endif ; Shell $(UtilityInf) FindService, $(KeyProduct) ; Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "PCX504.INF: FindService shell failure" Goto ShellCodeError Endif ; Ifstr(i) $($R0) != NO_ERROR Debug-Output "PCX504.INF: FindService Shell error: "$($R0) Goto fatalregistry endif ; Set KeyParameters = $($R2) CloseRegKey $($R1) ; Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif Set from = adapteroptions LoadLibrary "" $(!STF_WINDOWSSYSPATH)\$(DialogDllName) hLib read-syms FileDependentDlg$(!STF_LANGUAGE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ; ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) ifstr(i) $(ValueName) == "FormFactor" ifstr(i) $(ValueData) == "ISA" set FormFactor = "ISA" else-ifstr(i) $(ValueData) == "PCI" set FormFactor = "PCI" else set FormFactor = "PCMCIA" endif endif EndForListDo Debug-Output "+++++++++++++++++removeadapter+++++++++++++++++" Debug-Output "" Debug-Output "FormFactor= "$(FormFactor) Debug-Output "ProductKeyName= "$(ProductKeyName) Debug-Output "NTN_RegBase= "$(!NTN_RegBase) ; \\\\NetworkCard\1 Debug-Output "" Debug-Output "=============removeadapter=====================" ;; LibraryProcedure Result $(hLib) RemoveAdapterSetVars "PCX504" $(FormFactor) $(!NTN_RegBase) Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ; ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif ; set RegistryErrorIndex = $($R0) ; Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif ; else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ; ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif ; set RegistryErrorIndex = $($R0) ; Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\ciscotp" $(MAXIMUM_ALLOWED) CiscoTpKey ifstr $(CiscoTpKey) != $(NULL) ; open succeeded, so delete it CloseRegKey $(CiscoTpKey) DeleteRegTree $(!REG_H_LOCAL) "SYSTEM\CurrentControlSet\Services\ciscotp" endif ;; LibraryProcedure Result $(hLib) RemoveAdapterRemoveKeys goto end ;------------------------------------------------------------------------------- UpgradeSoftware = + ; OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct ; Ifstr $(KeyProduct) != $(KeyNull) ; install "Install-Update" ; ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS ; goto fatal ; endif ; SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} ; SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} ; CloseRegKey $(KeyProduct) ; else ; goto fatalregistry ; endif ; goto end ; Set DlgText = "UPDATE not supported. Please remove this NIC and reinstall it" ; Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(DlgText) Debug-Output "-------------------UpgradeSoftware-----------------------" Debug-Output ";;;;;;;;;;;;;;;;;;;((((((())))))))));;;;;;;;;;;;;;" Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif ; Shell $(UtilityInf) FindService, $(KeyProduct) Set KeyParameters = $($R2) CloseRegKey $($R1) ;; get the card name amd make sure it is PCX504 OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyCardName ;;;SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\1 GetRegValue $(KeyCardName) "ProductName" CardNameList set CardName = *($(CardNameList), 4) ; Ifstr(i) $(ProductSoftwareName) != "PCX504" set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "ShellCode error" goto ShellCodeError endif OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase)\NetRules $(MAXIMUM_ALLOWED) KeyNetRules GetRegValue $(KeyNetRules) "InfName" InfNameList set InfName = *($(InfNameList), 4) set !UG_Filename = $(InfName) Set SrcDir = $($2) Debug-Output "..............................." Debug-Output "ProductKeyName= "$(ProductKeyName) ;=SOFTWARE\Aironet\PCX504\CurrentVersion Debug-Output "NTN_RegBase= "$(!NTN_RegBase) ;=SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\1 Debug-Output $(ProductSoftwareName) ;=PCX504 Debug-Output $(RegistryErrorIndex) Debug-Output "InfNameList "$(InfNameList) Debug-Output "InfName "$(InfName) Debug-Output "SrcDir "$(SrcDir) Debug-Output "CardName "$(CardName) Debug-Output "..............................." Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif ; Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif ; install "Install-update" Set DlgText = "Updated your PCX504 driver software successfully" Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "STATUS" $(DlgText) Debug-Output ";;;;;;;;;;;;;;;;;;;((((((())))))))));;;;;;;;;;;;;;end" goto successful ; ; ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct ; Ifstr $(KeyProduct) != $(KeyNull) GetRegValue $(KeyProduct),"MajorVersion", VersionInfo set Version = *($(VersionInfo), 4) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ; ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ; set !UG_Filename = $($R0) ; ifstr(i) $(!UG_Filename) != "" install "Install-Update" ; ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif endif ; SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$( roductMinorVersion)} ifint $(Version) != $(ProductVersion) endif CloseRegKey $(KeyProduct) else goto fatalregistry endif else OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) NetworkCardKey ; Ifstr(i) $(NetworkCardKey) != $(KeyNull) GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo set ServiceName = *($(ServiceNameInfo), 4) OpenRegKey $(NetworkCardKey) "" "NetRules" $(MAXIMUM_ALLOWED) NetRuleKey ; Debug-Output $(ServiceName) Ifstr(i) $(NetRuleKey) != $(KeyNull) else goto fatalregistry endif CloseRegKey $(NetRules) CloseRegKey $(NetworkCardKey) else goto fatalregistry endif OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ServiceName) + $(MAXIMUM_ALLOWED) ServiceKey ; Ifstr(i) $(ServiceKey) != $(KeyNull) CloseRegKey $(ServiceKey) else goto fatalregistry endif endif goto end ; ;------------------------------------------------------------------------------- ; successful = + Debug-Output "-------------------------successful ------------------------" goto end ; ;------------------------------------------------------------------------------- ; abandon = + Debug-Output "-------------------------abandon ------------------------" ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ; ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif ; set RegistryErrorIndex = $($R0) ; Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif ; EndForListDo ; Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif ; set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end ; ;------------------------------------------------------------------------------- ; warning = + Debug-Output "-------------------------warning ------------------------" Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif ; ;------------------------------------------------------------------------------- ; nonfatalinfo = + Debug-Output "-------------------------nonfatalinfo ------------------------" Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL goto nonfatalmsg ; ;------------------------------------------------------------------------------- ; nonfatal = + Debug-Output "-------------------------nonfatal ------------------------" Set Severity = NONFATAL goto nonfatalmsg ; ;------------------------------------------------------------------------------- ; nonfatalmsg = + Debug-Output "-------------------------nonfatalmsg ------------------------" ; ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ; ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif ; Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ; ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif ; ;------------------------------------------------------------------------------- ; fatalregistry = + Debug-Output "-------------------------fatalregistry ------------------------" Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ; ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ; set Error = $($R0) goto fatal ; ;------------------------------------------------------------------------------- ; fataldetect = + Debug-Output "-------------------------fataldetect ------------------------" Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ; ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal ; ;------------------------------------------------------------------------------- ; fatal = + Debug-Output "-------------------------fatal ------------------------" ; ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ; ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ; set Error = $($R0) endif ; Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ; ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ; goto setfailed ; ;------------------------------------------------------------------------------- ; ShellCodeError = + Debug-Output "-------------------------ShellCodeError ------------------------" set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ; ui start "Error Message" goto setfailed ; ;------------------------------------------------------------------------------- ; setfailed = + Debug-Output "-------------------------setfailed ------------------------" set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end ; ;------------------------------------------------------------------------------- ; end = + Debug-Output "-------------------------end ------------------------" goto term ; ;------------------------------------------------------------------------------- ; term = + Debug-Output "-------------------------term ------------------------" Return $(CommonStatus) ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ [DebugConfiguration] Set InfName = "PCX504.INF" Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0) return ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-Sys $(SrcDir)$(NDIS4FOLDER) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Img $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ; ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif ; Exit ; ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ; [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" ; AddSectionFilesToCopyList Files-Sys $(SrcDir)$(NDIS4FOLDER) $(!STF_WINDOWSSYSPATH)\drivers ; AddSectionFilesToCopyList Files-Img $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Dll $(SrcDir)$(NDIS4FOLDER) $(!STF_WINDOWSSYSPATH) ; AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) ; set !STF_NCPA_FLUSH_COPYLIST = TRUE Debug-Output "Install-Update "$(SrcDir) CopyFilesInCopyList Exit ; ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ; [Install-Dll] set STF_VITAL = "" AddSectionFilesToCopyList Files-Dll $(SrcDir)$(NDIS4FOLDER) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit ; ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ; [Install-PmDriver] set STF_VITAL = "" AddSectionFilesToCopyList Files-PmDriver $(SrcDir)$(NDIS4FOLDER) $(!STF_WINDOWSSYSPATH)\drivers set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit ; ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ; [Source Media Descriptions] 1 = "Cisco Aironet PCX504 Setup Disk for NT" ; ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ; [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 ; ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ; [Files-Inf] 1,oemsetup.inf,SIZE=32044, RENAME=$(!UG_Filename) ; ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ; [Files-Sys] 1, PCX504.SYS, SIZE=94988 ; ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ; [Files-Img] 1, pcx504b.img, SIZE=131328 ; ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ; [Files-Dll] 1, pcx500.dll, SIZE=17408 ; ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ; [Files-PmDriver] 1, ciscotp.sys, SIZE=8192 ; ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ; [LanguagesSupported] ENG ; ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ [OptionsTextENG] PCI504 = "Cisco Systems mini-PCI Wireless LAN Adapter" ; ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ [FileConstantsENG] ; ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" FunctionTitle = "Cisco Systems Wireless LAN Adapter Setup" ProductSoftwareDescription = "Cisco Systems PCX504 Wireless LAN Adapter Driver" ProductSoftwareTitle = "Cisco Systems PCX504 Wireless LAN Adapter Driver" ShellCodeErrorTitle = "Error: "$(FunctionTitle) ShellCodeErrorText = "Shell Code Error." DialogDllName = "pcx500.dll" ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ; [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" ; ;@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ [FileDependentDlgENG] DlgType = "RadioCombination" DlgTemplate = "PCX504" Caption = $(FunctionTitle) HelpContext = $(!IDH_DB_OEMNADE2_INS) CBOptionsGreyed = {} NotifyFields = {NO, NO, NO, NO}Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.