#################################################################### Baseboard Management Controller (BMC) Firmware - v1.52 #################################################################### Description: Baseboard Management Controller (BMC) Firmware External Release Release Date: 03-07-2006 Contents: This file contains the following sections: * Criticality (required) * Minimum Requirements (required) * Release Highlights (required) * Installation (if applicable) * Known Issues (required) * History (if applicable) #################################################################### CRITICALITY #################################################################### 2 - Recommended #################################################################### MINIMUM REQUIREMENTS #################################################################### Compatibility / Minimum Requirements: This release is intended for PE1850, PE2800, PE2850, PE1800 PE1425, PE800, PE830, PE850 WHQL certified: ___ Yes ___ No __X_ Not Applicable #################################################################### RELEASE HIGHLIGHTS #################################################################### Release Highlights: Includes support for additional Serial Mux mode #################################################################### INSTALLATION #################################################################### Installation: Note: A flash utility must be used to program the BMC. Please use utility bmcfl16d.exe with the included bmcflsh.dat for flashing in the DOS environment. To install BMC firmware: 1. Copy the following files to a temporary directory: bmcfl16d.exe bmcflsh.dat bmccfg.def 2. Open a DOS Command window. 3. Change to the temporary directory referenced in step 1. 4. Run the bmcfl16d.exe program. The program will provide status prompts during the load, erase, and flash update process. 5. Verify that the program completes successfully and displays "Flash Completed. Checking Revision Completed.". OR Use Dell Update Package for Microsoft(R) Windows(R) OR Use Dell Update Package for Red Hat(R) Linux #################################################################### KNOWN ISSUES #################################################################### Known Limitations: None. #################################################################### HISTORY #################################################################### History: v1.52: Maintenance Release (03-07-2006) Includes support for additional Serial Mux mode v1.40: Maintenance Release (05-26-2005) Updated voltage message v1.38: Maintenance Release. (04-15-2005) 2 - Recommended Includes additional support for Chassis Status command. Removed setting of OEM bit in error condition. v1.33: No firmware change, only DUP release package update (5-12-2005) v1.33: Initial Release. (03-07-2005) 2 - Recommended Initial release of IPMI 1.5 firmware. Includes Onboard sensor support. Includes SDR Repository for 1U, 2U, and 5U platforms. Includes FRU Inventory information. (Serial #, part #, asset tag, etc.) Includes Event Receiver/Generator support. Includes support for Platform Event Filters. Includes support for Chassis Control commands. v1.23: Maintenance Release. (1-21-2005) 2 - Recommended Added SysRq over Serial Over LAN (SOL) support BMC renew DHCP lease too soon. BMC may process DHCP packets for other BMCs. v1.07: Initial Release. (8-9-2004) 2 - Recommended Initial release of IPMI 1.5 firmware. Includes Onboard sensor support. Includes SDR Repository for 1U, 2U, and 5U platforms. Includes FRU Inventory information. (Serial #, part #, asset tag, etc.) Includes Event Receiver/Generator support. Includes support for Platform Event Filters. Includes support for Chassis Control commands. #################################################################### Information in this document is subject to change without notice. (C) 2006 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: "Dell" and "PowerEdge" are trademarks of Dell Inc.; "Microsoft" and "Windows" are registered trademarks of Microsoft Corporation; "Red Hat" is a registered trademark of Red Hat, Inc.) Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. March 2006Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.