Readme.txt Driver File Contents (151366.EXE)

Dell Laser Printer S2500 Firmware Update

The following files are found in this release:
• This instruction sheet in .txt format
• 224_009.flm – update package for the printer network code. 

To upgrade the S2500 printer network firmware:
1. Make sure the printer is in the Ready state, i.e. the “Ready” is displayed on the printer LCD.
2. Go to the Printer’s Embedded Web Server by opening a web browser and entering the IP address of the printer into the address field, and click "GO".
3. Once the embedded web page has displayed, click the “Configurations” link on the left frame of the web page.
4. Click on "Update Print Server Firmware"
5. On the Update Print Server Firmware page, click the “Browse” button to browse to the location where the files were saved 
 (i.e. C:\Dell\Drivers\R151366) and select the file 224_009.flm, then click the “Open” button.
6. On the Update Print Server Firmware page, verify the “File Name:” entry contains the file 224_009.flm, then click the “Flash” button.
7. Once 100% of the file has been sent to the printer, the firmware in the printer will be updated.  DO NOT POWER OFF THE PRINTER WHILE THIS IS OCCURING.
8. The printer will automatically perform a power on reset when the firmware has successfully updated. This normally takes about 60 seconds.


Adjusted DST begin and end dates for AST, EST, CST, MST, PST, Alaska, and Newfoundland time zones to comply with
     2007 DST changes.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.39