;***********************************************************************
;
; Windows NT 4 Network Setup File (for NDIS4)
; NT Card Services Support
; Xircom Cardbus Ethernet 10/100 Network Adapters
; (c) 1996-1999 Xircom, Inc.
;
; $Revision: 1.13 $
; $Date: Sep 03 1999 15:54:02 $
;
;***********************************************************************
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
MCA
PCI
[Options]
CBENT
[OptionsTextENG]
CBENT = "Xircom CardBus Ethernet 10/100 Adapter for NT Card Services"
[AllFileConstants]
GenericInfVersion = " v2.60"
; File names, etc. ----------------------------------------
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
; EventLog Message File ----------------------------------------
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
; Product Info ----------------------------------------
Manufacturer = "Xircom"
; Flow control variables ----------------------------------------
;DISABLEPCMCIASYS = "1"
DISABLEPCMCIASYS = "0"
[FileConstants-CBENT]
GenericAdapterName = "Xircom CardBus Ethernet 10/100 for NT Card Services"
GenericDriverName = "Xircom CardBus Ethernet 10/100 for NT Card Services"
GenericSysName = "CBENT.sys"
GenericName = "CBENT"
; Product Info ----------------------------------------
ProductMajorVersion = "3"
ProductMinorVersion = "12"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
; Software ----------------------------------------
ProductSoftwareName = "CBENT"
ProductSoftwareDescription = "Xircom CardBus Ethernet 10/100 for NT Card Services"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType = "cbentSys ndisDriver cbentDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """cbentSys"" yes no container"
NetRuleSoftwareClass = {"cbentDriver basic"}
NetRuleSoftwareBindable = {"cbentDriver cbentAdapter non exclusive 100"}
; Hardware ----------------------------------------
ProductHardwareName = "CBENT"
ProductHardwareDescription = "Xircom CardBus Ethernet 10/100"
NetRuleHardwareType = "cbent cbentAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"cbentAdapter basic"}
; Registry Key ----------------------------------------
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
; Tuple Information -----------------------------------
VERS1Manufacturer = "Xircom"
VERS1Product = "CardBus Ethernet 10/100"
VERS1Product2 = "CardBus Ethernet II 10/100"
VERS1Type = "CBE-10/100"
PCMCIA = 0
PCIVendorID = 4445
[GeneralConstants]
; Program flow control variables.
from = ""
to = ""
; Return codes; Exit_Code is set to one of these
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
;---------------------------------
; Default list choices
;---------------------------------
DEFAULT_MEMORY = 27
DEFAULT_IO = 1
DEFAULT_IRQ = 6
[date]
; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
; Minute, Second }
Now = {} ? $(!LIBHANDLE) GetSystemDate
;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION: To verify that this INF deals with the same type of options
; as we are choosing currently.
;
; INPUT: None
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Option Type (COMPUTER ...)
; $($R2): Diskette description
;---------------------------------------------------------------------------
[Identify]
;
;
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
; STATUS_NOTSUPPORTED
;
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------------------
[ReturnOptions]
;
;
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
;
; Check if the platforms requested is supported
;
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
;
; form a list of all the options and another of the text representing
;
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;------------------------------------------------------------------------
;
; InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
;
; Set default values for
;
set Status = STATUS_FAILED
;
; extract parameters
;
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
Set !DebugOutputControl = 1
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms AllFileConstants
read-syms FileConstants"-"$(Option)
read-syms DialogConstants$(!STF_LANGUAGE)"-"$(Option)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms AllFileConstants$(!STF_LANGUAGE)
read-syms FileConstants$(!STF_LANGUAGE)"-"$(Option)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
;
; Assume all is well.
;
set CommonStatus = STATUS_SUCCESSFUL
EndWait
;
; Set up the operation-mode-based variables and gaily welcome
; the user. If the "install mode" variable is improperly set,
; assume this is a new installation.
;
Begin = +
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
; set ActivateDetection = TRUE
set StartLabel = configureadapter
;
; You cannot config the software component
;
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
;Debug-Output "Cannot configure the software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
; set ActivateDetection = TRUE
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
; Set the Default values
set MemoryAddrValue = *($(MemoryAddrList), $(DEFAULT_MEMORY)) ; Memory Address = 0x5B80000
set IOBaseAddrValue = *($(IOBaseAddrList), $(DEFAULT_IO)) ; IOBase Address = Default
set IRQValue = *($(IRQList), $(DEFAULT_IRQ)) ; IRQ Level = Default
set InterruptStyleValue = *($(InterruptStyleList), 1) ; InterruptStyle = Auto Detect
set LineSpeedValue = *($(LineSpeedList), 1) ; LineSpeed = Auto Detect
set LineModeValue = *($(LineModeList), 1) ; LineMode = Auto Detect
set SocketValue = *($(SocketList), 1) ; Socket = Auto Detect
set InitDelayValue = *($(InitDelayList), 1) ; InitDelay = 0
set EarlyTransmitValue = "ON" ; Early Transmit = on
set EarlyReceiveValue = "OFF" ; Early Receive = on
set LinkIntegrityValue = "ON" ; Link Integrity = Enabled
set CableDetectValue = "ON" ; Cable(Energy) Detect = Enabled
set AutoPolarityValue = "ON" ; Auto Polarity = Enabled
set MemoryModeValue = "OFF" ; Memory Mode = off
set DynamicLinkDetectValue = "ON" ; Dynamic Link Detection = on
set TxBufferSizeValue = 10
set RxBufferSizeValue = 30
Set from = $(fatal)
Set to = $(fatal)
Goto $(StartLabel)
;-----------------------------------------------
; Installation Section
;-----------------------------------------------
installadapter = +
;
; First, check whether the same version of the software exists
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
;
; Same version already existed in the local machine
; Popup the dialog and ask the user whether he wants to continue
;
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
;
; Cannot Install the same software again
;
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
;
; Add a new adapter card?
;
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
;
; dll load addition
;
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
install "Install-Dll"
goto adaptersetup
;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
; Get the current values of all the parameters
;
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
;
; Get the other parameters; they're attached to the service parameters key
;
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
;
; We don't need the services key, so close it.
;
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
;
; Get the old values from the Registry [Get Values]
; *********************************************************
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "MemoryBaseAddress"
set MemoryAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "IoBaseAddress"
set IOBaseAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptStyle"
set InterruptStyleIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "LineSpeed"
set LineSpeedIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "LineMode"
set LineModeIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "SocketNumber"
set SocketIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InitDelay"
set InitDelayIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "EarlyTransmit"
set EarlyTransmitValue = $(ValueData)
else-ifstr(i) $(ValueName) == "EarlyReceive"
set EarlyReceiveValue = $(ValueData)
else-ifstr(i) $(ValueName) == "LinkIntegrity"
set LinkIntegrityValue = $(ValueData)
else-ifstr(i) $(ValueName) == "CableDetect"
set CableDetectValue = $(ValueData)
else-ifstr(i) $(ValueName) == "AutoPolarity"
set AutoPolarityValue = $(ValueData)
else-ifstr(i) $(ValueName) == "MemoryMode"
set MemoryModeValue = $(ValueData)
else-ifstr(i) $(ValueName) == "DynamicLinkDetect"
set DynamicLinkDetectValue = $(ValueData)
else-ifstr(i) $(ValueName) == "TxBufferSize"
set TxBufferSizeValue = $(ValueData)
else-ifstr(i) $(ValueName) == "RxBufferSize"
set RxBufferSizeValue = $(ValueData)
endif
EndForListDo
set MemoryAddrValue = *($(MemoryAddrList), ~($(MemoryAddrValues),$(MemoryAddrIndex)))
ifstr(i) $(MemoryAddrValue) == ""
set MemoryAddrValue = *($(MemoryAddrValues), $(DEFAULT_MEMORY))
endif
set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex)))
ifstr(i) $(IOBaseAddrValue) == ""
set IOBaseAddrValue = *($(IOBaseAddrList), $(DEFAULT_IO))
endif
set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex)))
ifstr(i) $(IRQValue) == ""
set IRQValue = *($(IRQList), $(DEFAULT_IRQ))
endif
set InterruptStyleValue = *($(InterruptStyleList), ~($(InterruptStyleValues),$(InterruptStyleIndex)))
ifstr(i) $(InterruptStyleValue) == ""
set InterruptStyleValue = *($(InterruptStyleList), 0)
endif
set LineSpeedValue = *($(LineSpeedList), ~($(LineSpeedValues),$(LineSpeedIndex)))
ifstr(i) $(LineSpeedValue) == ""
set LineSpeedValue = *($(LineSpeedValues), 1)
endif
set LineModeValue = *($(LineModeList), ~($(LineModeValues),$(LineModeIndex)))
ifstr(i) $(LineModeValue) == ""
set LineModeValue = *($(LineModeValues), 1)
endif
set SocketValue = *($(SocketList), ~($(SocketValues),$(SocketIndex)))
ifstr(i) $(SocketValue) == ""
set SocketValue = *($(SocketValues), 1)
endif
set InitDelayValue = *($(InitDelayList), ~($(InitDelayValues),$(InitDelayIndex)))
ifstr(i) $(InitDelayValue) == ""
set InitDelayValue = *($(InitDelayValues), 1)
endif
ifstr(i) $(EarlyTransmitValue) == ""
set EarlyTransmitValue = 1
endif
ifstr(i) $(EarlyReceiveValue) == ""
set EarlyReceiveValue = 0
endif
ifstr(i) $(LinkIntegrityValue) == ""
set LinkIntegrityValue = 1
endif
ifstr(i) $(CableDetectValue) == ""
set CableDetectValue = 1
endif
ifstr(i) $(AutoPolarityValue) == ""
set AutoPolarityValue = 1
endif
ifstr(i) $(MemoryModeValue) == ""
set MemoryModeValue = 0
endif
ifstr(i) $(DynamicLinkDetectValue) == ""
set DynamicLinkDetectValue = 1
endif
ifint $(EarlyTransmitValue) == 1
set EarlyTransmitValue = "ON"
else
set EarlyTransmitValue = "OFF"
endif
ifint $(EarlyReceiveValue) == 1
set EarlyReceiveValue = "ON"
else
set EarlyReceiveValue = "OFF"
endif
ifint $(LinkIntegrityValue) == 1
set LinkIntegrityValue = "ON"
else
set LinkIntegrityValue = "OFF"
endif
ifint $(CableDetectValue) == 1
set CableDetectValue = "ON"
else
set CableDetectValue = "OFF"
endif
ifint $(AutoPolarityValue) == 1
set AutoPolarityValue = "ON"
else
set AutoPolarityValue = "OFF"
endif
ifint $(MemoryModeValue) == 1
set MemoryModeValue = "ON"
else
set MemoryModeValue = "OFF"
endif
ifint $(DynamicLinkDetectValue) == 1
set DynamicLinkDetectValue = "ON"
else
set DynamicLinkDetectValue = "OFF"
endif
set CheckItemsIn = {$(EarlyTransmitStr),$(EarlyReceiveStr),$(LinkIntegrityStr),$(CableDetectStr),+
$(AutoPolarityStr),$(MemoryModeStr),$(DynamicLinkDetectStr)}
;set CheckItemsIn = {"OFF", "ON", "OFF"}
; Save the settings as they were read from the Registry.
; Shell $(ParamInf) Param_SaveValues
; Set CurrParamSettings = $($R0)
;
; Put up the adapter configuration dialog if necessary.
;
; Note that $(CurrParamSettings) has the old known parameter values.
;
adaptersetup = +
;Shell "" DebugConfiguration "before displaying dialog"
Set from = adapteroptions
adapteroptions = +
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
goto skipoptions
endif
set CheckItemsIn = {$(EarlyTransmitStr),$(EarlyReceiveStr),$(LinkIntegrityStr),$(CableDetectStr),+
$(AutoPolarityStr),$(MemoryModeStr),$(DynamicLinkDetectStr)}
LoadLibrary "disk 1" $(DialogDllName) hLib
read-syms FileDependentDlg$(!STF_LANGUAGE)"-"$(Option)
set ENABLER = 0
;------------------------------------------------------
ui start "InputDlg" $(hLib)
set ExitButton = $(ButtonPressed)
FreeLibrary $(hLib)
ifstr(i) $(DLGEVENT) == "CONTINUE"
set MemoryAddrIndex = $(Combo1Out)
set IOBaseAddrIndex = $(Combo2Out)
set IRQValueIndex = $(Combo3Out)
set InterruptStyleIndex = $(Combo4Out)
set LineSpeedIndex = $(Combo5Out)
set LineModeIndex = $(Combo6Out)
set SocketIndex = $(Combo7Out)
set InitDelayIndex = $(Combo8Out)
set EarlyTransmitValue = *($(CheckItemsOut), 1)
set EarlyReceiveValue = *($(CheckItemsOut), 2)
set LinkIntegrityValue = *($(CheckItemsOut), 3)
set CableDetectValue = *($(CheckItemsOut), 4)
set AutoPolarityValue = *($(CheckItemsOut), 5)
set MemoryModeValue = *($(CheckItemsOut), 6)
set DynamicLinkDetectValue = *($(CheckItemsOut), 7)
set TxBufferSizeValue = *($(EditTextOut), 1)
set RxBufferSizeValue = *($(EditTextOut), 2)
set ExitButton = $(ButtonPressed)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
goto end
else
set CommonStatus = STATUS_USERCANCEL
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
;
; If installing, go create the necessary keys;
; if configuring, they're already open.
;
skipoptions =+
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
;
; Add Software Component
;
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
;
; At this point:
; $R1 contains the product version key handle;
; $R2 contains the NetRules subkey handle;
; $R3 contains the new Services key handle; and
; $R4 contains the Parameters key
; $R5 contains the Linkage Key
;
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
;
; Create the HARDWARE\Netcard region and its corresponding service
;
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
;
; At this point:
; $R1 Registry key variable for HARDWARE\Netcard\(n)
; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules
; $R3 Registry key handle for <service>\Parameters key
; $R4 Adapter number assigned to adapter
; $R5 Service name generated by combining svc name with adapter number
;
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
;
; REQUIRED: $(KeyParameters) contains service Parameters key handle
;
writeparameters = +
Shell $(UtilityInf), GetBusTypeNum
set BusTypeNum = $($R1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
;
; Add the rest of the parameters to the Services area
;
ifstr(i) $(EarlyTransmitValue) == "ON"
set EarlyTransmitValue = "1"
else
set EarlyTransmitValue = "0"
endif
ifstr(i) $(EarlyReceiveValue) == "ON"
set EarlyReceiveValue = "1"
else
set EarlyReceiveValue = "0"
endif
ifstr(i) $(LinkIntegrityValue) == "ON"
set LinkIntegrityValue = "1"
else
set LinkIntegrityValue = "0"
endif
ifstr(i) $(CableDetectValue) == "ON"
set CableDetectValue = "1"
else
set CableDetectValue = "0"
endif
ifstr(i) $(AutoPolarityValue) == "ON"
set AutoPolarityValue = "1"
else
set AutoPolarityValue = "0"
endif
ifstr(i) $(MemoryModeValue) == "ON"
set MemoryModeValue = "1"
else
set MemoryModeValue = "0"
endif
ifstr(i) $(DynamicLinkDetectValue) == "ON"
set DynamicLinkDetectValue = "1"
else
set DynamicLinkDetectValue = "0"
endif
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
set MemoryAddrValue = *($(MemoryAddrValues), $(DEFAULT_MEMORY))
set IOBaseAddrValue = *($(IOBaseAddrValues), $(DEFAULT_IO))
set IRQValue = *($(IRQValues), $(DEFAULT_IRQ))
set InterruptStyleValue = *($(InterruptStyleValues), 1)
set LineSpeedValue = *($(LineSpeedValues), 1)
set LineModeValue = *($(LineModeValues), 1)
set SocketValue = *($(SocketValues), 1)
set InitDelayValue = *($(InitDelayValues), 1)
else
set MemoryAddrValue = *($(MemoryAddrValues),~($(MemoryAddrList), $(MemoryAddrIndex)))
set IOBaseAddrValue = *($(IOBaseAddrValues),~($(IOBaseAddrList), $(IOBaseAddrIndex)))
set IRQValue = *($(IRQValues), ~($(IRQList), $(IRQValueIndex)))
set InterruptStyleValue = *($(InterruptStyleValues), ~($(InterruptStyleList), $(InterruptStyleIndex)))
set LineSpeedValue = *($(LineSpeedValues), ~($(LineSpeedList), $(LineSpeedIndex)))
set LineModeValue = *($(LineModeValues), ~($(LineModeList), $(LineModeIndex)))
set SocketValue = *($(SocketValues), ~($(SocketList), $(SocketIndex)))
set InitDelayValue = *($(InitDelayValues), ~($(InitDelayList), $(InitDelayIndex)))
endif
set NewValueList = {{AutoPolarity, $(NoTitle),$(!REG_VT_DWORD),$(AutoPolarityValue)},+
{BusNumber, $(NoTitle),$(!REG_VT_DWORD),0},+
{BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{CableDetect, $(NoTitle),$(!REG_VT_DWORD),$(CableDetectValue)},+
{DynamicLinkDetect, $(NoTitle),$(!REG_VT_DWORD),$(DynamicLinkDetectValue)},+
{EarlyReceive, $(NoTitle),$(!REG_VT_DWORD),$(EarlyReceiveValue)},+
{EarlyTransmit, $(NoTitle),$(!REG_VT_DWORD),$(EarlyTransmitValue)},+
{IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{InitDelay, $(NoTitle),$(!REG_VT_DWORD),$(InitDelayValue)},+
{InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{InterruptStyle, $(NoTitle),$(!REG_VT_DWORD),$(InterruptStyleValue)},+
{LineMode, $(NoTitle),$(!REG_VT_DWORD),$(LineModeValue)},+
{LineSpeed, $(NoTitle),$(!REG_VT_DWORD),$(LineSpeedValue)},+
{LinkIntegrity, $(NoTitle),$(!REG_VT_DWORD),$(LinkIntegrityValue)},+
{MediaType, $(NoTitle),$(!REG_VT_DWORD),1},+
{MemoryBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(MemoryAddrValue)},+
{MemoryMode, $(NoTitle),$(!REG_VT_DWORD),$(MemoryModeValue)},+
{PCIVendorID, $(NoTitle),$(!REG_VT_DWORD),4445},+
{PCMCIA, $(NoTitle),$(!REG_VT_DWORD),0},+
{RXBUFFERSIZE, $(NoTitle),$(!REG_VT_DWORD),$(RxBufferSizeValue)},+
{SocketNumber, $(NoTitle),$(!REG_VT_DWORD),$(SocketValue)},+
{TXBUFFERSIZE, $(NoTitle),$(!REG_VT_DWORD),$(TxBufferSizeValue)}+
}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell $(UtilityInf), AddDefaultNetCardParameters, $(KeyParameters)
endif
CloseRegKey $(KeyParameters)
; --------------------------------------------------------------------------------
; Version 1.0 of the driver requires that PCMCIA.sys be disabled to avoid
; contention problems with the cardbus controller chip. Should be fixed with
; updated PCMCIA.sys due from MS in Dec96
; --------------------------------------------------------------------------------
ifint $(DISABLEPCMCIASYS) == 1
set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia"
OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MAXIMUM_ALLOWED) PCMCIAKey
; Set the values --------------------------------------------------------------------------------------
SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),4} ; '4' disables the driver
CloseRegKey $(PCMCIAKey)
endif
; --------------------------------------------------------------------------------
; --------------------------------------------------------------------------------
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
goto successful
;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
;-----------------------------------------------
; Remove Manufacturer Key
;-----------------------------------------------
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_SoftwareBase) $(MAXIMUM_ALLOWED) KeyManf
Ifstr $(KeyManf) == $(KeyNull)
Debug-Output "INF: Could not open HKLM\SOFTWARE registry key"
else
DeleteRegKey $(KeyManf) $(Manufacturer)
Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS)
Debug-Output "INF: Could not delete Manufacturer registry key"
else
Debug-Output "INF: Deleted Manufacturer registry key"
Endif
CloseRegKey $(KeyManf)
endif
;-----------------------------------------------
; From version 1.0 of the driver, re-enable the PCMCIA.sys driver
; when removing this adapter from the system.
;-----------------------------------------------
ifint $(DISABLEPCMCIASYS) == 1
set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia"
OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MAXIMUM_ALLOWED) PCMCIAKey
; Set the values --------------------------------------------------------------------------------------
SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),0} ; '0' restores the driver to "BOOT"
CloseRegKey $(PCMCIAKey)
endif
goto end
;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------
UpgradeSoftware = +
;
; First determine whether we want to do upgrade or update for software
; or hardware component. Then we will determine whether the Mode is
; update or upgrade.
;
; If the same version of the product existed in the registry, we do
; update. Otherwise, we will do a upgrade
;
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Upgrade software component
;
; see whether the same version exist or not
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
;
; Update the binaries
;
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
; Upgrade the version number
;
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
;
; do nothing for update
;
ifint $(Version) != $(ProductVersion)
;
; If the major version number is not the same,
; it is major upgrade. So let Upgrade the product
;
;
; make other upgrade change if necessary
;
endif
CloseRegKey $(KeyProduct)
else
;
; Cannot Open software key, goto ERROR
;
goto fatalregistry
endif
else
;
; upgrade/update hardware component
; There is no different between upgrade and update for hardware
; component
;
; 1. Get the Service Name
; 2. Change the NetRule section if necessary
;
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
$(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
;
; Get Service name
;
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
;
; Change the NetRule if necessary
;
OpenRegKey $(NetworkCardKey) "" "NetRules" +
$(MAXIMUM_ALLOWED) NetRuleKey
Ifstr(i) $(NetRuleKey) != $(KeyNull)
;
; Make the change....
;
else
;
; Error, cannot open net rules key
;
goto fatalregistry
endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
else
;
; Error, cannot open network card key
;
goto fatalregistry
endif
;
; 3. Change the service section of the hardware. i.e.,
; ParameterName change, value change, etc.
;
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
Ifstr(i) $(ServiceKey) != $(KeyNull)
;
; Get the ServiceKey to change the Start value
; or Type value. Or open Parameters key to
; change the hardware parameters if necessary.
;
CloseRegKey $(ServiceKey)
else
;
; Error, cannot open network card key
;
goto fatalregistry
endif
endif
goto end
;
; End of Upgrade Software
;
;
; Escape hatches
;
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;
; warning display
;
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
;
; non fatal error display
;
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
;
; Registry is broken
;
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
;
; Netcard detection failure
;
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
;
; fatal error display
;
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
;
; Shelling error
;
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
;
; if OEM_ABANDON_ON == TRUE, then remove the registry entries
;
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[DebugConfiguration]
Set InfName = "OEMSETNT.INF"
;Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0)
;Debug-Output $(InfName)" IRQ_Level is "$(!p:IRQ_Level)
;Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue)
;Debug-Output $(InfName)" TransceiverValue is "$(!p:TransceiverValue)
;Debug-Output $(InfName)" MemoryAddr is "$(!p:MemoryAddr)
;Debug-Output $(InfName)" MappedValue is "$(!p:MappedValue)
return
;***************************************************************
; INSTALL SECTIONS
;***************************************************************
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
;
; Copy files in the copy list
;
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
;set STF_VERSION = "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-Dll]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "Xircom Setup Disk for NT"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1, OEMSETNT.INF, SIZE=58000, RENAME=$(!UG_Filename)
[Files-Dll]
1, CBE.DLL, SIZE=21000
[Files-CBENT]
1, CBENT.SYS, SIZE=53000
[LanguagesSupported]
ENG
[AllFileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
DialogDllName = "CBE.DLL"
; START CBE -------------------------------------------------------------------------------------------
[FileConstantsENG-CBENT]
FunctionTitle = $(GenericAdapterName)" Setup"$(GenericInfVersion)
ProductSoftwareTitle = $(GenericDriverName)
ProductHardwareTitle = $(GenericAdapterName)
MemoryAddrList = ^(MemoryAddrChoices,1)
MemoryAddrValues = ^(MemoryAddrChoices,2)
IOBaseAddrList = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(IOBaseAddrChoices, 2)
IRQList = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
InterruptStyleList = ^(InterruptStyleChoices, 1)
InterruptStyleValues = ^(InterruptStyleChoices, 2)
LineSpeedList = ^(LineSpeedChoices, 1)
LineSpeedValues = ^(LineSpeedChoices, 2)
LineModeList = ^(LineModeChoices, 1)
LineModeValues = ^(LineModeChoices, 2)
SocketList = ^(SocketChoices, 1)
SocketValues = ^(SocketChoices, 2)
InitDelayList = ^(InitDelayChoices, 1)
InitDelayValues = ^(InitDelayChoices, 2)
[DialogConstantsENG-CBENT]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG-CBENT]
DlgType = "RadioCombination"
DlgTemplate = "CBE"
Caption = $(FunctionTitle)
HelpContext = $(!IDH_DB_OEMNADE2_INS)
CBOptionsGreyed = {}
NotifyFields = {NO, NO, NO, NO, NO, NO, NO}
Combo1Label = "Memory Address:"
Combo2Label = "I/O Port:"
Combo3Label = "Interrupt:"
Combo4Label = "Interrupt Style:"
Combo5Label = "Line Speed:"
Combo6Label = "Line Mode:"
Combo7Label = "PCCard Socket:"
Combo8Label = "Initialization Delay:"
Check1 = "Early &Transmit"
Check2 = "Early &Receive"
Check3 = "Link &Integrity"
Check4 = "Cable &Detect"
Check5 = "Auto &Polarity"
Check6 = "&Memory Mode"
Check7 = "Dynamic &Link Detect"
Edit1Label = "Tx Buffer Size"
Edit2Label = "Rx Buffer Size"
Combo1List = $(MemoryAddrList)
Combo1Out = $(MemoryAddrValue)
Combo2List = $(IOBaseAddrList)
Combo2Out = $(IOBaseAddrValue)
Combo3List = $(IRQList)
Combo3Out = $(IRQValue)
Combo4List = $(InterruptStyleList)
Combo4Out = $(InterruptStyleValue)
Combo5List = $(LineSpeedList)
Combo5Out = $(LineSpeedValue)
Combo6List = $(LineModeList)
Combo6Out = $(LineModeValue)
Combo7List = $(SocketList)
Combo7Out = $(SocketValue)
Combo8List = $(InitDelayList)
Combo8Out = $(InitDelayValue)
ComboListItemsIn = {Combo1List,Combo2List,Combo3List, Combo4List, Combo5List, Combo6List, Combo7List, Combo8List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out, Combo5Out, Combo6Out, Combo7Out, Combo8Out}
CheckItemsIn = {$(EarlyTransmitValue),$(EarlyReceiveValue),$(LinkIntegrityValue),$(CableDetectValue),+
$(AutoPolarityValue),$(MemoryModeValue),$(DynamicLinkDetectValue)}
CheckItemsOut = {Check1Out, Check2Out, Check3Out, Check4Out, Check5Out, Check6Out, Check7Out}
EditTextIn = {$(TxBufferSizeValue), $(RxBufferSizeValue)}
EditTextLim = {"",""}
EditTextOut = {Edit1Out, Edit2Out}
; END CBE -------------------------------------------------------------------------------------------
[MemoryAddrChoices]
MA_0 = "Auto Detect", 0
MA_1 = "0xC0000", 786432
MA_2 = "0xC4000", 802816
MA_3 = "0xC8000", 819200
MA_4 = "0xCC000", 835584
MA_5 = "0xD0000", 851968
MA_6 = "0xD4000", 868352
MA_7 = "0xD8000", 884736
MA_8 = "0xDC000", 901120
MA_9 = "0xE0000", 917504
MA_10 = "0xE4000", 933888
MA_11 = "0xE8000", 950272
MA_12 = "0xEC000", 966656
MA_13 = "0x5B80000", 95944704
MA_14 = "0x5B84000", 95961088
MA_15 = "0x5B88000", 95977472
MA_16 = "0x5B8C000", 95993856
MA_17 = "0x10000000", 268435456
MA_18 = "0x10004000", 268451840
MA_19 = "0x10008000", 268468224
MA_20 = "0x1000C000", 268484608
MA_21 = "0x50000000", 1342177280
MA_22 = "0x50004000", 1342193664
MA_23 = "0x50008000", 1342210048
MA_24 = "0x5000C000", 1342226432
MA_25 = "0x55B80000", 1438121984
MA_26 = "0x55B84000", 1438138368
MA_27 = "0x55B88000", 1438154752
MA_28 = "0x55B8C000", 1438171136
MA_29 = "0xB0000000", 2952790016
MA_30 = "0xB0004000", 2952806400
MA_31 = "0xB0008000", 2952822784
MA_32 = "0xB000C000", 2952839168
[IRQChoices]
IRQ_0 = "Auto Detect", 0
IRQ_1 = "3", 3
IRQ_2 = "4", 4
IRQ_3 = "5", 5
IRQ_4 = "7", 7
IRQ_5 = "9", 9
IRQ_6 = "10", 10
IRQ_7 = "11", 11
IRQ_8 = "12", 12
IRQ_9 = "13", 13
IRQ_10 = "14", 14
IRQ_11 = "15", 15
[SocketChoices]
S_0 = "Auto Detect",0
S_1 = "1",1
S_2 = "2",2
S_3 = "3",3
S_4 = "4",4
[InterruptStyleChoices]
IS_1 = "Auto Detect", 0
IS_2 = "PCI IRQ", 1
IS_3 = "ISA IRQ", 2
[LineSpeedChoices]
LS_1 = "Auto Detect", 0
LS_2 = "10 Mbps", 1
LS_3 = "100 Mbps", 2
[LineModeChoices]
DPX_1 = "Auto Detect", 0
DPX_2 = "Half Duplex", 1
DPX_3 = "Full Duplex", 2
[IOBaseAddrChoices]
IOBase_0 = "Auto Detect",0
IOBase_1 = "0x1000",4096
IOBase_2 = "0x1800",6144
IOBase_3 = "0x2000",8192
IOBase_4 = "0x2800",10240
IOBase_5 = "0x3000",12288
IOBase_6 = "0x3800",14336
IOBase_7 = "0x4000",16384
IOBase_8 = "0x4800",18432
IOBase_9 = "0x5000",20480
IOBase_10 = "0x5800",22528
IOBase_11 = "0x6000",24576
IOBase_12 = "0x6800",26624
IOBase_13 = "0x7000",28672
IOBase_14 = "0x7800",30720
IOBase_15 = "0x8000",32768
IOBase_16 = "0x8800",34816
IOBase_17 = "0x9000",36864
IOBase_18 = "0x9800",38912
IOBase_19 = "0xA000",40960
IOBase_20 = "0xA800",43008
IOBase_21 = "0xB000",45056
IOBase_22 = "0xB800",47104
IOBase_23 = "0xC000",49152
IOBase_24 = "0xC800",51200
IOBase_25 = "0xD000",53248
IOBase_26 = "0xD800",55296
IOBase_27 = "0xE000",57344
IOBase_28 = "0xE800",59392
IOBase_29 = "0xF000",61440
IOBase_30 = "0xF500",62720
IOBase_31 = "0xF800",63488
[InitDelayChoices]
InitD_0 = "0",0
InitD_1 = "1",1
InitD_2 = "2",2
InitD_3 = "3",3
InitD_4 = "4",4
InitD_5 = "5",5
InitD_6 = "10",10
InitD_7 = "20",20
InitD_8 = "30",30
InitD_9 = "40",40
InitD_10 = "50",50
InitD_11 = "60",60
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.