1. R41465.EXE Driver
  2. OEMSETUP.INF File Contents

OEMSETUP.INF Driver File Contents (R41465.EXE)

 DOWNLOAD NOW
OEMSETUP.INF Driver Update Utility 
; *******************************************************************
; *
; *    DESCRIPTION: OEMSETUP.INF for Etherlink III (ISA, EISA, MCA)
; *
; *    HISTORY:
; *        v 1.0 - Microsoft Orginal file for only elpc3 (ISA)
; *        v 1.1 - Adapted to support EISA and MCA as well.
; *        v 1.2 - Adapted to support Windows NT 3.5/3.51
; *        v 1.3 - Adding support for elpc3r PCMCIA Card
; *
; *******************************************************************

[Identification]
    OptionType = NetAdapter

[PlatformsSupported]
    ISA
;    EISA
;    MCA
    PCMCIA
    "Jazz-Internal Bus"

[Options]
    ELNK16
    ELNK16B
    ELNK16D

[FileConstants]
UtilityInf                      = "UTILITY.INF"
ParamInf                        = "NCPARAM.INF"
subroutineinf                   = "SUBROUTN.INF"
SoftwareType                    = "driver"
Exit_Code                       = 0
NetEventDLL                     = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\elpc3rs.sys"
IoLogMsgDLL                     = "%SystemRoot%\System32\IoLogMsg.dll"
MS_Manufacturer                 = "Microsoft"
Manufacturer                    = "3Com"
ProductMajorVersion             = "4"
ProductMinorVersion             = "0"
ProductVersion                  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName             = "elpc3r"
ProductSoftwareImagePath        = "\SystemRoot\System32\drivers\elpc3rs.sys"
NetRuleSoftwareType             = "elpc3rSys ndisDriver elpc3rDriver"
NetRuleSoftwareUse              = $(SoftwareType)
NetRuleSoftwareBindForm         = """elpc3rSys"" yes no container"
NetRuleSoftwareClass            = {"elpc3rDriver basic"}
NetRuleSoftwareBindable         = {"elpc3rDriver elpc3rAdapter non exclusive 100"}
ProductHardwareName             = "elpc3r"
NetRuleHardwareType             = "elpc3r elpc3rAdapter"
NetRuleHardwareBindForm         = " yes yes container"
NetRuleHardwareClass            = {"elpc3rAdapter basic"}

ProductKeyName                  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
MS_ProductKeyName               = $(!NTN_SoftwareBase)"\"$(MS_Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName                    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

NETCARD_ID                      = { 25212, 25213, 25051, 25334, 25335 }

[GeneralConstants]
!G:DebugOutputControl           = 1
from                            = ""
to                              = ""
ExitCodeOk                      = 0
ExitCodeCancel                  = 1
ExitCodeFatal                   = 2
KeyNull                         = ""
MAXIMUM_ALLOWED                 = 33554432
RegistryErrorIndex              = NO_ERROR
KeyProduct                      = ""
KeyParameters                   = ""
TRUE                            = 1
FALSE                           = 0
NoTitle                         = 0
ExitState                       = "Active"
OldVersionExisted               = $(FALSE)
DriverPath                      = $(!STF_NTPATH)\drivers

[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate

[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 3, 1)
    Return $(Status) $(Identifier) $(Media)

[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
    ifstr(i) $($1) == ""
            goto returnoptions
    endif
    set PlatformList = ^(PlatformsSupported, 1)
    Ifcontains(i) $($1) in $(PlatformList)
            goto returnoptions
    else
            set Status = STATUS_NOTSUPPORTED
            goto finish_ReturnOptions
    endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif

returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL

finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

[InstallOption]
    set Status   = STATUS_FAILED
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
    Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
    set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Set ActivateDetection = FALSE
    Ifstr(i) $(!NTN_InstallMode) == deinstall
    set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
    set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
    set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
    set CommonStatus = STATUS_REBOOT
    set ActivateDetection = TRUE

    set StartLabel = elpc3rISA509configureadapter

    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Debug-Output "Cannot configure the EtherLink III driver software."
        Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error: cannot get an error string."
        goto ShellCodeError
        endif
        set Error = $($R0)
        set from = end
        set to = end
        goto nonfatalinfo
    endif
    else
    set ActivateDetection = TRUE
    set StartLabel = elpc3rISA509installadapter
    set OEM_ABANDON_OPTIONS = {}
    set OEM_ABANDON_SOFTWARE = FALSE
    set OEM_ABANDON_ON = TRUE
    endif
    set AdapterTypeValue = 256  ; set default adapter type
    Ifstr(i) $(Option) == ELNK16B
        set AdapterTypeValue = 257
    else-ifstr(i) $(Option) == ELNK16D
        set AdapterTypeValue = 259
    endif
    set OldOption = $(Option)
    Debug-Output "oemsetup.inf: =================================================="
    Debug-Output "oemsetup.inf: STF_CWDIR is: "$(!STF_CWDIR)
    Debug-Output "oemsetup.inf: STF_LANGUAGE is: "$(!STF_LANGUAGE)
    Debug-Output "oemsetup.inf: Option is: "$(Option)
    Debug-Output "oemsetup.inf: !STF_NCDETECT  is: "$(!STF_NCDETECT)
    Debug-Output "oemsetup.inf: !STF_NCOPTION  is: "$(!STF_NCOPTION)
    Debug-Output "oemsetup.inf: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
    Debug-Output "oemsetup.inf: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
    Debug-Output "oemsetup.inf: =================================================="
    Set DetectedCard = FALSE

    Ifstr(i) $(ActivateDetection) != TRUE
    Set from = $(fatal)
    Set to = $(fatal)
    Goto $(StartLabel)
    Endif

SkipDetection = +
    ; Don't need to set the IOBase in install mode for ISA adapters.
    ;

    Set TypeList = {{IRQ, IRQList, IRQValue}, {IOADDR, IOADDR_Addr_List, IOBaseAddrValue}}
    Debug-Output "oemsetup.inf: Calling Param_BuildTypeLists"
    Debug-Output ">>> Option=$(Option) TypeList=$(TypeList)"
    set Option = ELNK16
    Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList)
    set Option = $(OldOption);
    Set Status = $($R0)
    ifstr(i) $(Status) != STATUS_SUCCESSFUL
    Goto fataldetect
    Endif
    Debug-Output "oemsetup.inf: Calling Param_SetDefaults"
    Shell $(ParamInf) Param_SetDefaults {{IOADDR,768},{IRQ,10}}
    Shell $(ParamInf) HexListFromDecList $(IOADDR_Addr_List)
    Set IOADDR_Hex_List = $($R0)
    Shell $(UtilityInf) SortList $(IRQList) TRUE FALSE
    Set IRQList = $($R0)

    Set NewList = {Auto}
    ForListDo $(IRQList)
        Set NewList = >($(NewList),$($))
    EndForListDo
    Set IRQList = {}
    ForListDo $(NewList)
        Set IRQList = >($(IRQList),$($))
    EndForListDo
    Set IRQValue = 0

    Set NewList = {Auto}
    ForListDo $(IOADDR_Addr_List)
        Set NewList = >($(NewList),$($))
    EndForListDo
    Set IOADDR_Addr_List = {}
    ForListDo $(NewList)
        Set IOADDR_Addr_List = >($(IOADDR_Addr_List),$($))
    EndForListDo
    Set NewList = {Auto}
    ForListDo $(IOADDR_Hex_List)
        Set NewList = >($(NewList),$($))
    EndForListDo
    Set IOADDR_Hex_List = {}
    ForListDo $(NewList)
        Set IOADDR_Hex_List = >($(IOADDR_Hex_List),$($))
    EndForListDo
    ifstr(i) $(IOADDR_Addr_List) == ""
        Set IOBaseAddrValue = *($(IOADDR_Addr_List), 1)
    endif

    Ifstr(i) $(!STF_NCDETECT) == YES
    Ifstr(i) $(!STF_NCOPTION) == $(Option)
       Set DetectedCard = TRUE
       Debug-Output "oemsetup.inf: Setting DetectedCard to TRUE"
    Endif
    Endif
    Shell "" DebugConfiguration "After parameter querying"
SkipBuildTypeList = +
    Set from = $(fatal)
    Set to = $(fatal)
    Debug-Output "$(InfFile) $(Option): Jumping to $(StartLabel)"
    Goto $(StartLabel)

;*******************************************************************************
;
; Etherlink III ISA Specific routines for the this .inf file.
;
;
elpc3rISA509installadapter = +
    Debug-Output "$(InfFile) $(Option): Installadapter"
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
    CloseRegKey $(KeyProduct)
    ; @@1
    ifstr(i) $(!NTN_RegBase) == $(ProductKeyName)
       Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
           $(ProductVersion)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
           Debug-Output "ShellCode error: cannot get an error string."
           goto ShellCodeError
       endif
       goto end
    else
       Shell $(UtilityInf), CardExistedDlg
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
           Debug-Output "ShellCode error: cannot get an error string."
           goto ShellCodeError
       endif
       ifstr(i) $($R1) != "OK"
           set CommonStatus = STATUS_USERCANCEL
           goto end
       endif
       set OldVersionExisted = $(TRUE)
    endif
    endif
    Set CurrParamSettings = {}
    Ifstr(i) $(DetectedCard) != TRUE
    Goto elpc3rISA509adaptersetup2
    Endif
    StartWait
    Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
    EndWait
    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
    Goto elpc3rISA509adaptersetup2
    Endif
    Set DetectedParams = $($R1)
    Debug-Output "oemsetup.inf: Calling Param_SetDefaults to merge detected params"
    Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
    goto elpc3rISA509adaptersetup2

elpc3rISA509configureadapter = +
    Debug-Output "$(InfFile) $(Option): Configureadapter"
    Ifstr $(KeyProduct) == $(KeyNull)
    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        Debug-Output "Cannot find component product key"
        goto fatalregistry
    Endif
    Endif
    Debug-Output "INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
    Debug-Output "INF: FindService shell failure"
    Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
    Debug-Output "INF: FindService Shell error: "$($R0)
    Goto fatalregistry
    endif
    Set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
    set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
    Debug-Output "Cannot find component service"
    goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
    set ValueItem = $($)
    set ValueName = *($(ValueItem),1)
    set ValueData = *($(ValueItem),4)
    Ifstr(i) $(ValueName) == "IoBaseAddress"
        set IOBaseAddrValue = $(ValueData)
    else-ifstr(i) $(ValueName) == "InterruptNumber"
        set IRQValue = $(ValueData)
    ;Shradha
    else-ifstr(i) $(ValueName) == "AdapterName"
        set OldAdapterName = $(ValueData)
        Debug-Output "<DBG> AdapterName in registry = "$(OldAdapterName)
    ;Shradha
    endif
    EndForListDo
    set BusInterfaceType = 8    ; PCCARD
    set BusNumber = 0           ;
    Shell $(ParamInf) Param_SaveValues
    Set CurrParamSettings = $($R0)
    Debug-Output "CurrParamSettings: $(CurrParamSettings)"

elpc3rISA509adaptersetup = +
    Debug-Output "$(InfFile) $(Option): AdapterSetup"
    Shell "" DebugConfiguration "before displaying dialog"
    Set from = elpc3rISA509adapteroptions
    Set IOADDR_Hex_Value = *($(IOADDR_Hex_List), ~($(IOADDR_Addr_List),$(IOBaseAddrValue)))
    Shell $(ParamInf) Param_ParameterConfidence
    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
    Debug-Output "oemsetup.inf: parameter confidence too low to bypass configuration"
    Goto elpc3rISA509adapteroptions
    Endif
elpc3rISA509adaptersetup2 = +
    Ifstr(i) $(DetectedCard) == TRUE
    Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM
        Goto elpc3rISA509adapterverify
    Endif
    Endif

elpc3rISA509adapteroptions = +
    Debug-Output "$(InfFile) $(Option): AdapterOptions"
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
        ifstr(i) $(!AutoNetInterfaceType) != ""
            set BusInterfaceType = $(!AutoNetInterfaceType)
        else
            set BusInterfaceType = 1
        endif
        ifstr(i) $(!AutoNetBusNumber) != ""
            set BusNumber = $(!AutoNetBusNumber)
        else
            set BusNumber = 0
        endif
        goto elpc3rISA509adapterverify
    endif
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    Debug-Output "Calling ui start..."
    Debug-Output "Combo1List: $(Combo1List)"
    Debug-Output "Combo2List: $(Combo2List)"
    ui start "InputDlg"
    Debug-Output "Leaving ui start..."
    Debug-Output "Combo1Out: $(Combo1Out)"
    Debug-Output "Combo2Out: $(Combo2Out)"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
    set IOADDR_Hex_Value = $(Combo1Out)
    Set IOBaseAddrValue = *($(IOADDR_Addr_List), ~($(IOADDR_Hex_List),$(IOADDR_Hex_Value)))
    set IRQValue = $(Combo2Out)
    ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
    set CommonStatus = STATUS_USERCANCEL
    Debug-Output "Action: exit. Bye."
    ui pop 1
    goto end
    else
    Debug-Output "Action: unknown. Bye."
    ui pop 1
    goto end
    endif
;;************************************************************************************************
;; Specific to WinNT v3.5 and above..
getbustype = +

        ;Shradha
        ;Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber)
        ;ifint $($ShellCode) != $(!SHELL_CODE_OK)
            ;Debug-Output "ShellCode error."
            ;goto ShellCodeError
        ;endif
        ;set BusInterfaceType = $($R1)
        ;set BusNumber = $($R2)
        ;set BusInterfaceType = 1        ; force to use ISA
; The following line was already commented - Shradha
;        set BusNumber = 0
        ; Added the following lines - Shradha
        set BusInterfaceType = 1        ; force to use ISA
        set BusNumber = 0
        ; Shradha

elpc3rISA509adapterverify = +
    Debug-Output "$(InfFile) $(Option): Adapterverify"
    Shell "" DebugConfiguration "after running dialog"
    Ifstr(i) $(DetectedCard) != TRUE
    Shell $(ParamInf) Param_SaveValues
    Set NewParamSettings = $($R0)
    Debug-Output "NewParamSettings: $(NewParamSettings)"
    Ifstr(i) $(CurrParamSettings) == {}
        Set DiffParamSettings = $(NewParamSettings)
    Else
        Shell $(ParamInf) Param_DiffValues $(CurrParamSettings)
        Set DiffParamSettings = $($R0)
    Endif
    Debug-Output "oemsetup.inf: Calling Param_VerifyResources"
    Shell $(ParamInf) Param_VerifyResources $(DiffParamSettings)
    Ifstr(i) $($R0) == STATUS_SUCCESSFUL
        Debug-Output "oemsetup.inf: Param_VerifyResources succeeded"
        Goto elpc3rISA509skipoptions
    Endif
    Else
    Set CardVerifyIndex = $(!STF_NCDETCARD)
    Debug-Output "oemsetup.inf: Calling Param_VerifyCard"
    Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
    Ifstr(i) $($R0) == STATUS_SUCCESSFUL
        Debug-Output "oemsetup.inf: Param_VerifyCard succeeded"
        Goto elpc3rISA509skipoptions
    Endif
    Endif
    Set from = elpc3rISA509adapteroptions
    Set to = elpc3rISA509skipoptions
    Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    Debug-Output "ShellCode error: cannot get an error string."
    goto ShellCodeError
    endif
    set Error = $($R0)
    Goto Warning

elpc3rISA509skipoptions =+
    Debug-Output "$(InfFile) $(Option): SkipOptions"
    ifint $(OldVersionExisted) == $(TRUE)
    ifstr(i) $(!NTN_InstallMode) == configure
        goto elpc3rISA509writeparameters
    endif
    endif
    StartWait
    ifint $(OldVersionExisted) == $(FALSE)
    ifstr(i) $(!NTN_InstallMode) == "install"
       Ifstr(i) $(DoCopy) == "YES"
          Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
          Ifint $($ShellCode) != $(!SHELL_CODE_OK)
          Goto ShellCodeError
          Else-Ifstr(i) $($R0) == STATUS_FAILED
          Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
          ifint $($ShellCode) != $(!SHELL_CODE_OK)
              goto ShellCodeError
          endif
          set Error = $($R0)
          Goto fatal
          Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
          Goto successful
          Endif
          Set SrcDir = $($R1)
       Endif
       install "Install-Option"
       ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
          Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
          ifint $($ShellCode) != $(!SHELL_CODE_OK)
          goto ShellCodeError
          endif
          set Error = $($R0)
          goto fatal
       endif
    endif
    Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
        $(ProductSoftwareName), +
        $(ProductSoftwareName), +
        $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
        $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
        $(NetEventDLL)
    Set OEM_ABANDON_SOFTWARE = TRUE
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error"
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    set KeyProduct      = $($R1)
    Set SoftNetRulesKey = $($R2)
    CloseRegKey $($R3)
    CloseRegKey $($R4)
    CloseRegKey $($R5)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Registry error: add software components"
        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)
        goto fatalregistry
    endif
    set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
               {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
               {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
               {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
               {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
               {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
               {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
    Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Registry error: add value list."
        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)
        goto fatalregistry
    endif
    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
                {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
    Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    CloseRegKey $(KeyProduct)
    CloseRegKey $(SoftNetRulesKey)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Resgitry error: add value list."
        goto fatalregistry
    endif
    endif
    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
    ifint $($R4) != -1
    Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    Debug-Output "Cannot add hardware component"
    goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
    EndWait
    Debug-Output "Registry error: add hardware component"
    CloseRegKey $($R1)
    CloseRegKey $($R2)
    CloseRegKey $($R3)
    goto fatalregistry
    endif
    set KeyParameters = $($R3)
    set KeyAdapterRules = $($R2)
    set AdapterNumber = $($R4)
    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
               {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
               {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
               {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
               {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
               {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    Debug-Output "ShellCode error"
    goto ShellCodeError
    endif
    CloseRegKey $($R1)
    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
            {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    Debug-Output "ShellCode error."
    goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
    EndWait
    Debug-Output "Resgitry error: add value list."
    CloseRegKey $(KeyParameters)
    CloseRegKey $(KeyAdapterRules)
    goto fatalregistry
    endif
    CloseRegKey $(KeyAdapterRules)
    goto elpc3rISA509writeparameters

elpc3rISA509writeparameters = +
    Debug-Output "$(InfFile) $(Option): Write Pcmcia database"
    OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation\3C589" $(MAXIMUM_ALLOWED) MyPcmciaHandle
    Ifstr $(MyPcmciaHandle) == $(KeyNull)
        Debug-Output "CreatRegKey (3C589)"
        OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation" $(MAXIMUM_ALLOWED) MyPcmciaKey
        CreateRegKey $(MyPcmciaKey) {"3C589",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
        CloseRegKey ($MyPcmciaKey)
        OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation\3C589" $(MAXIMUM_ALLOWED) MyPcmciaHandle
    endif
    set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),"elpc3r"}}
    Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList)
    Debug-Output "<DBG> AddValueList - Driver:REG_SZ:elpc3r"
    CloseRegKey $(MyPcmciaHandle)

    Debug-Output "$(InfFile) $(Option): Write Pcmcia database"
    OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation\3C589D" $(MAXIMUM_ALLOWED) MyPcmciaHandle
    Ifstr $(MyPcmciaHandle) == $(KeyNull)
        Debug-Output "CreatRegKey (3C589D)"
        OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation" $(MAXIMUM_ALLOWED) MyPcmciaKey
        CreateRegKey $(MyPcmciaKey) {"3C589D",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
        CloseRegKey ($MyPcmciaKey)
        OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation\3C589D" $(MAXIMUM_ALLOWED) MyPcmciaHandle
    endif
    set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),"elpc3r"}}
    Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList)
    Debug-Output "<DBG> AddValueList - Driver:REG_SZ:elpc3r"
    CloseRegKey $(MyPcmciaHandle)

    ;Shradha
    ifstr $(OldAdapterName) == ""
            Debug-Output "<DBG> setting OldAdapterName"
            set OldAdapterName = $(ProductHardwareName)$(AdapterNumber)
    endif
    Debug-Output "<DBG> OldAdapterName = "$(OldAdapterName)
    ;Shradha

    Debug-Output "$(InfFile) $(Option): Write"
    Set NewValueList = {+
               {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
               {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
               {CardType,$(NoTitle),$(!REG_VT_DWORD),0},+
               {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
               {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
               {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
               {AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(AdapterTypeValue)},+
               ;Shradha
               ;{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+
               {SoftexPcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+
               {AdapterName,$(NoTitle),$(!REG_VT_SZ),$(OldAdapterName)},+
               ;Shradha
               {OSType,$(NoTitle),$(!REG_VT_DWORD),1}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
    Shell $(UtilityInf), AddDefaultNetCardParameters, $(KeyParameters)
    endif
    CloseRegKey $(KeyParameters)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    Debug-Output "ShellCode error."
    goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
    Debug-Output "Registry error: Add value list"
    goto fatalregistry
    endif
    EndWait
    goto successful

;*******************************************************************************
;
; Common routines for the entire .inf file.
;
;
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
    Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
        $(ProductSoftwareName)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error"
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
    else
    Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
        $(ProductSoftwareName), $(!NTN_RegBase)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error"
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
    endif
    goto end
UpgradeSoftware = +
    Debug-Output "Looking at Key: "$(ProductKeyName)
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    ;
    ; Also update if Microsoft installed the driver.
    ;
    Ifstr $(KeyProduct) == $(KeyNull)
        Debug-Output "Looking at Key: "$(MS_ProductKeyName)
        OpenRegKey $(!REG_H_LOCAL) "" $(MS_ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    endif
    Ifstr $(KeyProduct) != $(KeyNull)
    Debug-Output "Adding files to install list"
    install "Install-Update"
    ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
        goto fatal
    endif
    Debug-Output "Changing Reg Version Nubmers!"
    SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
    SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
    CloseRegKey $(KeyProduct)
    else
    goto fatalregistry
    endif
    goto end

successful = +
    goto end

abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
    Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
        $(ProductSoftwareName), $($)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error"
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
    Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
        $(ProductSoftwareName), FALSE
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error"
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
    endif
    goto end
warning = +
;    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
;    ifint $($ShellCode) != $(!SHELL_CODE_OK)
;    goto ShellCodeError
;    endif
;    ifstr(i) $($R1) == "OK"
    goto $(to)
;    else-ifstr(i) $($R1) == "CANCEL"
;    goto $(from)
;    else
;    goto "end"
;    endif
nonfatalinfo = +
    Set Severity = STATUS
    Set CommonStatus = STATUS_USERCANCEL
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
    Set Severity = NONFATAL
    Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
    goto $(from)
    else
    goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    Debug-Output "ShellCode error: cannot get an error string."
    goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
fatal = +
    ifstr(i) $(Error) == ""
    Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
    set OEM_ABANDON_ON = FALSE
    goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)

[DebugConfiguration]
    Set InfName = "Oemsetup.INF"
    Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0)
    Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue)
    return

[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        Debug-Output $(InfName)"Adding files: Files-$(Option), SrcDir=$(SrcDir)"
    AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
        AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    Exit

[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   Debug-Output $(InfName)"Adding files: Files-$(Option), SrcDir=$(SrcDir)"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit

[Source Media Descriptions]
    1  = "Windows NT Setup Disk #1"
    2  = "Windows NT Setup CD-ROM Disk"
    3  = "3Com Etherdisk for EtherLink III"

[Signature]
    FileType = MICROSOFT_FILE

[GetSignature]
    read-syms Signature
    return $(FileType)

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386

[Files-Inf]

[Files-ELNK16]
3,elpc3rs.sys , SIZE=35328

[Files-ELNK16B]
3,elpc3rs.sys , SIZE=35328

[Files-ELNK16D]
3,elpc3rs.sys , SIZE=35328

[LanguagesSupported]
    ENG

[OptionsTextENG]
    ELNK16       = "3Com EtherLink III (3C589) LAN PC Card"
    ELNK16B      = "3Com EtherLink III (3C589B/C) LAN PC Card"
    ELNK16D      = "3Com EtherLink III (3C589D) LAN PC Card"

[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
           "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle                           = "3Com EtherLink III PC Card"
ProductSoftwareDescription              = "3Com EtherLink III PC Card Driver"
ProductSoftwareTitle                    = "3Com EtherLink III PC Card Driver"
ProductHardwareELNK16Title              = "3Com EtherLink III (3C589) LAN PC Card"
ProductHardwareELNK16Description        = "3Com EtherLink III (3C589) LAN PC Card"
ProductHardwareELNK16BTitle             = "3Com EtherLink III (3C589B/C) LAN PC Card"
ProductHardwareELNK16BDescription       = "3Com EtherLink III (3C589B/C) LAN PC Card"
ProductHardwareELNK16DTitle             = "3Com EtherLink III (3C589D) LAN PC Card"
ProductHardwareELNK16DDescription       = "3Com EtherLink III (3C589D) LAN PC Card"
ShellCodeErrorTitle                     = "Error: "$(FunctionTitle)
ShellCodeErrorText                      = "Shell Code Error."

[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[FileDependentDlgENG]
Label1 = "I/O &Port Address:"
Label2 = "&Interrupt Number:"
DlgType = "Combination"
DlgTemplate = "NE2000"
Caption = $(FunctionTitle)
Combo1List = $(IOADDR_Hex_List)
Combo1Out  = $(IOADDR_Hex_Value)
Combo2List = $(IRQList)
Combo2Out = $(IRQValue)
ComboListItemsIn = {Combo1List, Combo2List}
ComboListItemsOut = {Combo1Out, Combo2Out}
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO, NO}
HelpContext = $(!IDH_DB_OEMNADE3_INS)
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2026 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web5, load: 1.05