INSTALLATION INSTRUCTIONS FOR
APPLE POWER MACINTOSH
The following instructions are for installing the KTI NETWORKS' KF221
100Base-TX PCI adapter on an Apple Power Macintosh computer that supports
the PCI bus(7200/7500/7600/8500/9500):
1. Install the adapter in any one of the PCI slots available.
To install the adapter, please follow the instructions in the
chapter on "Installing an Expansion Card" in your Power Macintosh
User's Guide.
2. Connect the adapter to a 100Base-TX hub.
Please follow the instructions in the "Connecting to the Network"
section in the Installation Guide to attach the cable. Make sure it
has a good connection. The driver won't be loaded if the connection
is not good.
3. Install the driver:
Insert the driver diskette, double click the diskette icon, then
go to the "apple" directory by double clicking the icon labeled "apple."
You should see a file called KTXDLPI, this is the driver for the KF221
adapter. Drag KTXDLPI and drop it into System | Extensions folder on
your hard disk.
4. Check the driver.
Restart your computer, go to Control Panels | AppleTalk and check
"Connect via:" field, you should see Ethernet built-in, Modem port,
Printer port, and one of the following Ethernet slots: A1/B1/C1/D1/E1/F1.
If you see one of the Ethernet slots (A-F1), the adapter and driver
are installed successfully. To use the KF221 adapter, select Ethernet
slot A-F1 (whichever Ethernet slot is listed in the "Connect via" field)
in AppleTalk and TCP/IP.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.