///////////////////////////////////////////////////////////////////////////
- Dell Receipt Printer T200 -
Installation the USB vender class driver for Windows
Last Mod. 2005/05/27 11:57:58
///////////////////////////////////////////////////////////////////////////
This README file contains the following sections:
1. Installation the USB vender class driver for OPOS/JavaPOS
1-1. In case using Windows XP
1-2. In case using Windows 2000
1-3. In case using Windows 98
=====================================================================
1. Installation the USB vender class driver for OPOS/JavaPOS
=====================================================================
1-1. In case using Windows XP
======================================================
Take the following steps to install the USB vender class driver.
1. Turn the Printer off.
2. Remove the screw from the DIP switch cover and take off
the DIP switch cover.
3. Set the #5 of DIP switch1 off using a pointed tool.
4. Make sure that the PC is running.
5. When you connect the USB cable and turn on the printer,
the Found New Hardware Wizard appeared on your computer screen.
6. Select 'No. not this time', and then click 'Next'
Note: It's needed only on 'Windows XP SP2'
7. Select 'Install from a list or specific location (Advanced)',
and then click 'Next'.
8. Select 'Search for the best driver in these lacations' and
check 'Include this location in the search' only.
Specify a location where Dell T200 printer driver is located.
Click 'Browse' button and choose folder.
C:\dell\T200\USBVenderClassDriver\2K_XP\
Replace C:\ with the letter of system drive.
Click 'Next'.
The wizard copies all of the necessary files and installs
the drivers.
9. Click 'Finish' button.
The USB vender class driver installation is completed.
1-2. In case using Windows 2000
======================================================
Take the following steps to install the USB vender class driver.
1. Turn the Printer off.
2. Remove the screw from the DIP switch cover and take off
the DIP switch cover.
3. Set the #5 of DIP switch1 off using a pointed tool.
4. Make sure that the PC is running.
5. When you connect the USB cable and turn on the printer,
the Found New Hardware Wizard appeared on your computer screen.
6. Click 'Next' and select 'Search for a suitable driver...',
and then click 'Next'.
7. Select 'Specify a location' only, and then click 'Next'.
8. Browse to the location of the printer driver.
C:\dell\T200\USBVenderClassDriver\2K_XP\
Replace C:\ with the letter of system drive.
9. Click 'Open', and then click 'OK'.
10. Click 'Next' to install the driver that is displayed.
C:\dell\T200\USBVenderClassDriver\2K_XP\DLUSBCOM.inf
11. Click 'Finish' button.
The USB vender class driver installation is completed.
1-3. In case using Windows 98
======================================================
Take the following steps to install the USB vender class driver.
1. Turn the Printer off.
2. Remove the screw from the DIP switch cover and take off
the DIP switch cover.
3. Set the #5 of DIP switch1 off using a pointed tool.
4. Make sure that the PC is running.
5. Connect PC and Printer with USB cable.
6. Turn the Printer on.
7. The window is opened if you connected by the USB cable.
Click 'Next' button.
8. Check 'Search for the best driver.....', and click 'Next'.
9. Check 'Specify a location' only, and click 'Browse'.
10. Click 'Browse' button and choose folder.
C:\dell\T200\USBVenderClassDriver\9X\
Replace C:\ with the letter of system drive.
Click 'OK' and 'Next' button.
11. Click 'Next' and then Click 'Finish'.
12. Click 'Next' button.
13. Check 'Search for the best....', and click 'Next'.
14. Click 'Browse' button and choose folder.
C:\dell\T200\USBVenderClassDriver\9X\
Replace C:\ with the letter of system drive.
Click 'Next' button.
15. Click 'Next' and then Click 'Finish'.
The USB vender class driver installation is completed.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.