;*********************************************************************** ; ISDN 128K Driver Setup File for WINDOWS NT ;*********************************************************************** [Identification] OptionType = NetAdapter ;*********************************************************************** [PlatformsSupported] ISA EISA PCI ;*********************************************************************** [Options] IINWANNT ;*********************************************************************** [FileConstants] Company = "Multi-Tech Systems" ProductName = "MT128ISA" SwitchType = "6" VoiceType_Speech = "1" VoiceType_31KAudio = "4" aLawType = "0" uLawType = "1" CodecType = $(aLawType) VoiceType = $(VoiceType_31KAudio) OurMajorVersion = "2" OurMinorVersion = "30" BinList = { 0, 0, 0, 0, 0, 0, 0, 0,+ 0, 0, 0, 0, 32, 0, 0, 0,+ 34, 0, 0, 0, 0, 0, 0, 0,+ 34 } IIN100KeyName = "IIN100" IIN100PropName = "IIN100\Properties" IIN100EventLog = "EventLog\System\iin100" MessageFileName = "%SystemRoot%\System32\netevent.dll;"+ "%SystemRoot%\System32\Drivers\iin100.sys" RunCode = 6 ; ---------------------------------------------------------------------- InfName = "OEMINWAN.INF" UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = $(Company) ProductGroupName = $(ProductName) ProductMajorVersion = $(OurMajorVersion) ProductMinorVersion = $(OurMinorVersion) ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "IINWANNT" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\IINWANNT.sys" NetRuleSoftwareType = "IINWANNTSys IINWANNTDriver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """IINWANNTSys"" yes no container" NetRuleSoftwareClass = {"IINWANNTDriver basic"} NetRuleSoftwareBindable = {"IINWANNTDriver IINWANNTAdapter non exclusive 100"} ProductHardwareName = "IINWANNT" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareIINWANNTType = "IINWANNT IINWANNTAdapter" NetRuleHardwareIINWANNTClass = {"IINWANNTAdapter basic"} BindableIINWANNTTxt = {"IINWANNTDriver IINWANNTAdapter non exclusive 100"} DeviceMap = "HARDWARE\DEVICEMAP" TapiDevices = "TAPI DEVICES" TapiDeviceKey = $(ProductHardwareName) TapiMediaType = "ISDN" ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"+ $(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)+ "\Parameters" LineType = 1 ;*********************************************************************** [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers IIN100Key = "" ;*********************************************************************** [Date] Now = {} ? $(!LIBHANDLE) GetSystemDate ;*********************************************************************** [Identify] Read-Syms Identification Set Status = STATUS_SUCCESSFUL Set Identifier = $(OptionType) Set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) ;*********************************************************************** [ReturnOptions] Set Status = STATUS_FAILED Set OptionList = {} Set OptionTextList = {} Set LanguageList = ^(LanguagesSupported, 1) IfContains(i) $($0) in $(LanguageList) IfStr(i) $($1) == "" GoTo SetOptions EndIf Set PlatformList = ^(PlatformsSupported, 1) IfContains(i) $($1) in $(PlatformList) GoTo SetOptions Else Set Status = STATUS_NOTSUPPORTED GoTo ExitReturnOptions EndIf Else Set Status = STATUS_NOLANGUAGE GoTo ExitReturnOptions EndIf SetOptions = + Set OptionList = ^(Options, 1) Set OptionTextList = ^(OptionsText$($0), 1) Set Status = STATUS_SUCCESSFUL ExitReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) ;*********************************************************************** [InstallOption] Set Status = STATUS_FAILED Set Option = $($1) Set SrcDir = $($2) Set RasDir = $($2) Set AddCopy = $($3) Set DoCopy = $($4) Set DoConfig = $($5) Set LanguageList = ^(LanguagesSupported, 1) IfContains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE EndIf Set-Subst LF = "\n" Read-Syms GeneralConstants Read-Syms FileConstants IfStr(i) $(!NTN_Origination) == "NCPA" Set Continue = $(OK) EndIf Read-Syms FileConstants$(!STF_LANGUAGE) Detect Date Set-Title $(FunctionTitle)$(Option) Set to = Begin Set from = Begin Set CommonStatus = STATUS_SUCCESSFUL EndWait ;*********************************************************************** Begin = + Set ActivateDetection = FALSE IfStr(i) $(!NTN_InstallMode) == deinstall Set StartLabel = RemoveAdapter Else-IfStr(i) $(!NTN_InstallMode) == Update Set StartLabel = UpgradeSoftware Else-IfStr(i) $(!NTN_InstallMode) == bind Set StartLabel = BindingAdapter Else-IfStr(i) $(!NTN_InstallMode) == configure Set StartLabel = ConfigureAdapter Set ActivateDetection = TRUE Set CommonStatus = STATUS_REBOOT IfStr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set Error = $($R0) Set from = end Set to = end GoTo NonFatalInfo EndIf Else Set StartLabel = InstallAdapter Set ActivateDetection = TRUE Set OEM_ABANDON_OPTIONS = {} Set OEM_ABANDON_SOFTWARE = FALSE Set OEM_ABANDON_ON = TRUE EndIf Set DetectedCard = FALSE IfStr(i) $(ActivateDetection) != TRUE GoTo $(StartLabel) EndIf Shell $(ParamInf) Param_SetDefaults {} IfStr(i) $(!STF_NCDETECT) == YES IfStr(i) $(!STF_NCOPTION) == $(Option) Set DetectedCard = TRUE EndIf EndIf Shell "" DebugConfiguration "After parameter querying" Set from = FatalError Set to = FatalError GoTo $(StartLabel) ;*********************************************************************** InstallAdapter = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct IfStr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) IfStr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf GoTo end Else Shell $(UtilityInf), CardExistedDlg IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf IfStr(i) $($R1) != "OK" Set CommonStatus = STATUS_USERCANCEL GoTo end EndIf Set OldVersionExisted = $(TRUE) EndIf EndIf Set CurrParamSettings = {} IfStr(i) $(DetectedCard) != TRUE GoTo AdapterSetup EndIf StartWait Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD) EndWait IfStr(i) $($R0) != STATUS_SUCCESSFUL GoTo AdapterSetup EndIf Set DetectedParams = $($R1) Shell $(ParamInf) Param_SetDefaults $(DetectedParams) GoTo AdapterSetup ;*********************************************************************** ConfigureAdapter = + IfStr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct IfStr $(KeyProduct) == $(KeyNull) Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE GoTo FatalRegistry EndIf EndIf Shell $(UtilityInf) FindService, $(KeyProduct) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf IfStr(i) $($R0) != NO_ERROR GoTo FatalRegistry EndIf Set KeyParameters = $($R2) CloseRegKey $($R1) IfStr $(KeyParameters) == $(KeyNull) Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE GoTo FatalRegistry EndIf Set OldVersionExisted = $(TRUE) Set ValueName = "" Set ValueData = "" Set ValueStr = "" Set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) Set ValueItem = $($) Set ValueName = *($(ValueItem),1) Set ValueData = *($(ValueItem),4) IfStr(i) $(ValueName) == "LineType" Set LineType = $(ValueData) Else-IfStr(i) $(ValueName) == "BusNumber" set BusNumber = $(ValueData) Else-IfStr(i) $(ValueName) == "BusType" set BusType = $(ValueData) Else-IfStr(i) $(ValueName) == "ADP_Number" set AdpNumber = $(ValueData) EndIf EndForListDo Shell $(ParamInf) Param_SaveValues Set CurrParamSettings = $($R0) ;*********************************************************************** AdapterSetup = + Shell "" DebugConfiguration "before displaying dialog" Set from = AdapterOptions Shell $(ParamInf) Param_ParameterConfidence IfStr(i) $($R0) != STATUS_SUCCESSFUL GoTo AdapterOptions EndIf IfStr(i) $(DetectedCard) == TRUE IfStr(i) $(!STF_INSTALL_MODE) != CUSTOM GoTo AdapterVerify EndIf EndIf ;*********************************************************************** AdapterOptions = + IfStr(i) $(!STF_NCDETINFO) == {} Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusType) $(BusNumber) ifInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set BusType = $($R1) Set BusNumber = $($R2) Else Set BusType = *($(!STF_NCDETINFO),5) Set BusNumber = *($(!STF_NCDETINFO),6) EndIf ;*********************************************************************** AdapterVerify = + Shell "" DebugConfiguration "after running dialog" IfStr(i) $(DetectedCard) != TRUE Shell $(ParamInf) Param_SaveValues Set NewParamSettings = $($R0) IfStr(i) $(CurrParamSettings) == {} Set DiffParamSettings = $(NewParamSettings) Else Shell $(ParamInf) Param_DiffValues $(CurrParamSettings) Set DiffParamSettings = $($R0) EndIf Shell $(ParamInf) Param_VerifyResources $(DiffParamSettings) IfStr(i) $($R0) == STATUS_SUCCESSFUL GoTo SkipOptions EndIf Else Set CardVerifyIndex = $(!STF_NCDETCARD) Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD) IfStr(i) $($R0) == STATUS_SUCCESSFUL GoTo SkipOptions EndIf EndIf Set from = AdapterOptions Set to = SkipOptions Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set Error = $($R0) GoTo WarningMsg ;*********************************************************************** SkipOptions =+ IfInt $(OldVersionExisted) == $(TRUE) IfStr(i) $(!NTN_InstallMode) == configure ; ;Modify the bustype in our registry ---Bustype = 5 (PCI) 1 (ISA) ; OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services" $(MAXIMUM_ALLOWED) BaseKey shell "" AsCreateRegKey $(BaseKey) $(IIN100PropName) IfStr(i) $($R0) != NO_ERROR GoTo FatalRegistry EndIf Set IIN100Key = $($R1) IfStr(i) $(BusType) == "5" Set ISDNBusType = "1" Else Set ISDNBusType = "0" Endif ; Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", + ; "Bustype"+$(BusType) Set NewValueList = { + {BUS, $(NoTitle), $(!REG_VT_DWORD), $(ISDNBusType)} } Shell $(UtilityInf), AddValueList, $(IIN100Key), $(NewValueList) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR GoTo FatalRegistry EndIf ; ;--------------------- ; GoTo WriteParameters EndIf EndIf StartWait IfInt $(OldVersionExisted) == $(FALSE) IfStr(i) $(!NTN_InstallMode) == "install" IfStr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError Else-IfStr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set Error = $($R0) GoTo FatalError Else-IfStr(i) $($R0) == STATUS_USERCANCEL GoTo SuccessfulOption EndIf Set SrcDir = $($R1) EndIf Install "Install-Option" IfStr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set Error = $($R0) GoTo FatalError EndIf EndIf ; add the registry entries for IIN100 ;========================================================================= OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services" $(MAXIMUM_ALLOWED) BaseKey shell "" AsCreateRegKey $(BaseKey) $(IIN100KeyName) IfStr(i) $($R0) != NO_ERROR GoTo FatalRegistry EndIf Set IIN100Key = $($R1) Set NewValueList = { {DisplayName,$(NoTitle),$(!REG_VT_SZ),"ISDN Driver"},+ {Type,$(NoTitle),$(!REG_VT_DWORD),"1"},+ {Start,$(NoTitle),$(!REG_VT_DWORD),"1"},+ {Group,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ErrorControl,$(NoTitle),$(!REG_VT_DWORD),"1"} } Shell $(UtilityInf), AddValueList, $(IIN100Key), $(NewValueList) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR GoTo FatalRegistry EndIf CloseRegKey $(IIN100Key) shell "" AsCreateRegKey $(BaseKey) $(IIN100PropName) IfStr(i) $($R0) != NO_ERROR GoTo FatalRegistry EndIf Set IIN100Key = $($R1) IfStr(i) $(BusType) == "5" Set ISDNBusType = "1" Else Set ISDNBusType = "0" Endif Set NewValueList = { {RECORD,$(NoTitle),$(!REG_VT_BIN), $(BinList) },+ {SWITCH,$(NoTitle),$(!REG_VT_DWORD),$(SwitchType)},+ {CODEC,$(NoTitle),$(!REG_VT_DWORD),$(CodecType)},+ {CALLTYPE(VOICE),$(NoTitle),$(!REG_VT_DWORD),$(VoiceType)},+ {MSN(POTS),$(NoTitle),$(!REG_VT_SZ),""},+ {SPID1,$(NoTitle),$(!REG_VT_SZ),""},+ {SPID2,$(NoTitle),$(!REG_VT_SZ),""},+ {MAJ,$(NoTitle),$(!REG_VT_DWORD),$(OurMajorVersion)},+ {MIN,$(NoTitle),$(!REG_VT_DWORD),$(OurMinorVersion)},+ {MFNAME,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {STANDBYTIME,$(NoTitle),$(!REG_VT_DWORD),"3"},+ {Action,$(NoTitle),$(!REG_VT_DWORD),"262149"},+ {Auto,$(NoTitle),$(!REG_VT_DWORD),"0"},+ {Param1,$(NoTitle),$(!REG_VT_DWORD),"0"},+ {Param2,$(NoTitle),$(!REG_VT_DWORD),"0"}, + {BUS, $(NoTitle), $(!REG_VT_DWORD), $(ISDNBusType)} } Shell $(UtilityInf), AddValueList, $(IIN100Key), $(NewValueList) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR GoTo FatalRegistry EndIf shell "" AsCreateRegKey $(BaseKey) $(IIN100EventLog) IfStr(i) $($R0) != NO_ERROR GoTo FatalRegistry EndIf Set IIN100Key = $($R1) Set NewValueList = { {EventMessageFile,$(NoTitle),$(!REG_VT_EXPAND_SZ), $(MessageFileName) },+ {TypesSupported,$(NoTitle),$(!REG_VT_DWORD),"7"} } Shell $(UtilityInf), AddValueList, $(IIN100Key), $(NewValueList) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR GoTo FatalRegistry EndIf CloseRegKey $(IIN100Key) CloseRegKey $(BaseKey) ;================================================ Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernelautostart", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set RegistryErrorIndex = $($R0) Set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) IfStr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) GoTo FatalRegistry EndIf Set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) GoTo FatalRegistry EndIf Set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(Bindable$(Option)Txt)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) IfStr(i) $(RegistryErrorIndex) != NO_ERROR EndWait GoTo FatalRegistry EndIf EndIf Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) Set AdpNumber = $($R4) IfInt $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) EndIf IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) GoTo FatalRegistry EndIf Set KeyParameters = $($R3) Set KeyAdapterRules = $($R2) Set AdapterNumber = $($R4) Set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf CloseRegKey $($R1) Set TempProdName = """"$(ProductHardwareName)$(AdpNumber)"""" Set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) Set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) GoTo FatalRegistry EndIf CloseRegKey $(KeyAdapterRules) GoTo WriteParameters ;*********************************************************************** WriteParameters = + Set TapiAddressList = {$(AdpNumber)"-1-0"} Set TapiAddressList = >($(TapiAddressList),$(AdpNumber)"-2-0") ;======================================== ; run configure program ;======================================== RunProgram RunCode "ISDN Driver Setup Disk" "" $(!STF_WINDOWSSYSPATH)\iincfg32.exe ;======================================== Set NewValueList = {+ {AddressList,$(NoTitle),$(!REG_VT_MULTI_SZ),$(TapiAddressList)},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusType)},+ {DeviceName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {LineType,$(NoTitle),$(!REG_VT_DWORD),$(LineType)},+ {MediaType,$(NoTitle),$(!REG_VT_SZ),$(TapiMediaType)},+ {ADP_Number,$(NoTitle),$(!REG_VT_DWORD),$(AdpNumber)},+ } Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) CloseRegKey $(KeyParameters) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR GoTo FatalRegistry EndIf ; IfStr(i) $(!NTN_InstallMode) == configure GoTo SuccessfulOption EndIf ; ; Create the HARDWARE\DEVICEMAP\TAPI DEVICES\IINWANNT key ; OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP" $(MAXIMUM_ALLOWED) BaseKey Set TapiKeyName = "TAPI DEVICES\IINWANNT" shell "" AsCreateRegKey $(BaseKey) $(TapiKeyName) IfStr(i) $($R0) != NO_ERROR GoTo FatalRegistry EndIf Set TapiDeviceKey = $($R1) Set NewValueList = {+ {Address,$(NoTitle),$(!REG_VT_MULTI_SZ),$(TapiAddressList)},+ {"Media Type",$(NoTitle),$(!REG_VT_SZ),$(TapiMediaType)}} Shell $(UtilityInf), AddValueList, $(TapiDeviceKey), $(NewValueList) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR GoTo FatalRegistry EndIf CloseRegKey $(TapiDeviceKey) CloseRegKey $(BaseKey) ; ; Check RAS installed or not. To invoke RAS if not ; ; Read-Syms InvokeRasDlg$(!STF_LANGUAGE) Shell "oemnsvra.inf" CheckRasInstalled IfInt $($ShellCode) != $(!SHELL_CODE_OK) Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), + "STATUS", $(InvokeRasError) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf EndIf ; Set RasInstalled = $($R0) IfStr(i) $(RasInstalled) == FALSE Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", + $(InvokeRasSetupMsg) GoTo SuccessfulOption IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo SuccessfulOption EndIf Else Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", + $(InvokeRasConfigMsg) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo SuccessfulOption EndIf EndIf ; ; IfStr(i) $(!STF_IDW) == TRUE Set AddCopy = NO Set DoCopy = NO Set DoConfig = NO Else Set AddCopy = YES Set DoCopy = YES Set DoConfig = YES EndIf ; ; change the NTN_InstallMode to configure if RAS was already installed ; IfStr(i) $(RasInstalled) == TRUE Set SaveNTN_InstallMode = $(!NTN_InstallMode) Set !NTN_InstallMode = configure Else GoTo SuccessfulOption EndIf ; ; now invoke RAS setup ; Shell "oemnsvra.inf" InstallOption $(!STF_LANGUAGE) "RAS" $(RasDir) $(AddCopy) $(DoCopy) $(DoConfig) IfStr(i) $(RasInstalled) == TRUE Set !NTN_InstallMode = $(SaveNTN_InstallMode) EndIf IfInt $($ShellCode) != $(!SHELL_CODE_OK) Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", + $(InvokeRasError) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf GoTo SuccessfulOption EndIf EndWait GoTo SuccessfulOption ;*********************************************************************** BindingAdapter =+ Set Error = "Binding: Sorry, not yet implemented." GoTo FatalError ;*********************************************************************** RemoveAdapter = + IfStr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR GoTo FatalRegistry EndIf Else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR GoTo FatalRegistry EndIf EndIf ;============================================================= ; Remove the IIN100 entry and isdncfg.cpl ;============================================================= Shell $(UtilityInf), RemoveService, $(IIN100KeyName), "NO" IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR GoTo FatalRegistry EndIf ;====================== GoTo end ;*********************************************************************** UpgradeSoftware = + ; IfStr(i) $(ProductKeyName) == $(!NTN_RegBase) OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct IfStr $(KeyProduct) != $(KeyNull) GetRegValue $(KeyProduct),"MajorVersion", VersionInfo Set Version = *($(VersionInfo), 4) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set !UG_Filename = $($R0) IfStr(i) $(!UG_Filename) != "" install "Install-Update" IfStr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS GoTo FatalError EndIf EndIf SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} IfInt $(Version) != $(ProductVersion) EndIf CloseRegKey $(KeyProduct) Else GoTo FatalRegistry EndIf GoTo end ;*********************************************************************** SuccessfulOption = + GoTo end ;*********************************************************************** Abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR GoTo FatalRegistry EndIf EndForListDo IfStr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR GoTo FatalRegistry EndIf EndIf GoTo end ;*********************************************************************** WarningMsg = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf IfStr(i) $($R1) == "OK" GoTo $(to) Else-IfStr(i) $($R1) == "CANCEL" GoTo $(from) EndIf GoTo end ;*********************************************************************** NonFatalInfo = + Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL IfStr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set Error = $($R0) EndIf Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf IfStr(i) $($R1) == "OK" GoTo $(from) EndIf GoTo end ;*********************************************************************** FatalRegistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set Error = $($R0) GoTo FatalError ;*********************************************************************** FatalDetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set Error = $($R0) GoTo FatalError ;*********************************************************************** FatalError = + IfStr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf Set Error = $($R0) EndIf Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) IfInt $($ShellCode) != $(!SHELL_CODE_OK) GoTo ShellCodeError EndIf GoTo SetFailed ;*********************************************************************** ShellCodeError = + Set DlgType = "MessageBox" Set STF_MB_TITLE = $(ShellCodeErrorTitle) Set STF_MB_TEXT = $(ShellCodeErrorText) Set STF_MB_TYPE = 1 Set STF_MB_ICON = 3 Set STF_MB_DEF = 1 UI Start "Error Message" GoTo SetFailed ;*********************************************************************** SetFailed = + Set CommonStatus = STATUS_FAILED IfStr(i) $(OEM_ABANDON_ON) == TRUE Set OEM_ABANDON_ON = FALSE GoTo Abandon EndIf GoTo end ;*********************************************************************** end = + Set !DebugOutputControl = $(OldDebugControl) IfStr(i) $(!NTN_InstallMode) == "install" Return $(CommonStatus) Else IfInt $(RunCode) == 0 Return STATUS_USERCANCEL Else Return $(CommonStatus) Endif Endif ;*********************************************************************** [AsCreateRegKey] Set ECR_Result = NO_ERROR Set ECR_BaseKeyHandle = $($0) Set ECR_NewPath = $($1) Set KeyNull = "" Set MAXIMUM_ALLOWED = 33554432 OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_NewPath) $(MAXIMUM_ALLOWED) + ECR_BaseKey IfStr $(ECR_BaseKey) == $(KeyNull) Else Set ECR_KeyHandle = $(ECR_BaseKey) GoTo ECR_Return EndIf Set ECR_TmpPath = "" Split-String $(ECR_NewPath) "\" ECR_PList ForListDo $(ECR_PList) IfStr(i) $($) != "\" IfInt $(#) == 1 Set ECR_TmpPath = $($) Else Set ECR_TmpPath = $(ECR_TmpPath)"\"$($) EndIf OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_TmpPath) $(MAXIMUM_ALLOWED) ECR_BaseKey IfStr $(ECR_BaseKey) == $(KeyNull) CreateRegKey $(ECR_BaseKeyHandle) {$(ECR_TmpPath),0,GenericClass} "" $(MAXIMUM_ALLOWED) "" ECR_KeyHandle IfStr(i) $(ECR_KeyHandle) == $(KeyNull) Set ECR_Result = $($R0) GoTo ECR_Return EndIf EndIf EndIf EndForListDo ECR_Return = + Return $(ECR_Result) $(ECR_KeyHandle) ;*********************************************************************** [DebugConfiguration] Return ;*********************************************************************** [Install-Option] Set STF_VITAL = "" IfStr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-System $(SrcDir) $(!STF_WINDOWSSYSPATH) EndIf IfStr(i) $(DoCopy) == "YES" Set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList EndIf Exit ;*********************************************************************** [Install-Update] Set STF_VITAL = "" Set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-System $(SrcDir) $(!STF_WINDOWSSYSPATH) Set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit ;*********************************************************************** [Source Media Descriptions] 1 = "ISDN Driver Setup Disk" , TAGFILE = IIN100.SYS 2 = "ISDN Driver Setup Disk" , TAGFILE = IINWANNT.SYS 3 = "ISDN Driver Setup Disk" , TAGFILE = CAPI2032.dll 4 = "ISDN Driver Setup Disk" , TAGFILE = LOG32.EXE 5 = "ISDN Driver Setup Disk" , TAGFILE = IINCFG32.EXE 6 = "ISDN Driver Setup Disk" , TAGFILE = LT32.EXE ;*********************************************************************** [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 ;*********************************************************************** [Files-Inf] 1, oemsetup.inf, SIZE=49000, RENAME=$(!UG_Filename) ;*********************************************************************** [Files-IINWANNT] 1, IIN100.SYS, SIZE=190000 2, IINWANNT.SYS, SIZE=320000 ;*********************************************************************** [Files-System] 1, CAPI2032.DLL, SIZE=7680 2, LOG32.EXE, SIZE=160256 3, LT32.EXE, SIZE=163840 4, IINCFG32.EXE, SIZE=98816 ;*********************************************************************** [Files-RemoveList] IINWANNTSYS = $(!STF_WINDOWSSYSPATH)\drivers\iinwannt.sys IIN100SYS = $(!STF_WINDOWSSYSPATH)\drivers\iin100.sys CAPI2032DLL = $(!STF_WINDOWSSYSPATH)\capi2032.dll LOG32EXE = $(!STF_WINDOWSSYSPATH)\log32.exe IINCFG32 = $(!STF_WINDOWSSYSPATH)\iincfg32.exe LT32 = $(!STF_WINDOWSSYSPATH)\lt32.exe ;*********************************************************************** [LanguagesSupported] ENG ;*********************************************************************** [OptionsTextENG] IINWANNT = "ISDN MT128ISA Adapter" ;*********************************************************************** [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" FunctionTitleIINWANNT = $(Company)"'s "$(ProductName)" ISDN Driver Setup" ProductSoftwareDescription = $(Company)"'s "$(ProductName)" ISDN Driver" ProductHardwareIINWANNTDescription = $(Company)"'s "$(ProductName)" ISDN Driver" ProductSoftwareTitle = $(Company)"'s "$(ProductName)" ISDN Driver" ProductHardwareIINWANNTTitle = $(Company)"'s "$(ProductName)" ISDN Driver" ShellCodeErrorTitle = "Error: "$(FunctionTitle)$(Option)) ShellCodeErrorText = "Shell Code Error." ;*********************************************************************** [InvokeRasDlgENG] InvokeRasSetupMsg = $(Company)"'s "$(ProductName)" ISDN Driver setup is "+ "complete. Remote Access "+ "Services (RAS) must now be installed."+ "Please configure the ISDN ports in RAS setup to "+ "enable you to use RAS over the ISDN." InvokeRasConfigMsg = $(Company)"'s "$(ProductName)" ISDN Driver setup is "+ "complete. Remote Access "+ "Services (RAS) setup must now be invoked. "+ "Please configure the ISDN ports in RAS setup to "+ "enable you to use RAS over the ISDN." InvokeRasError = $(Company)"'s "$(ProductName)" ISDN Driver setup "+ "encountered an error while "+ "invoking the RAS setup INF file (OEMNSVRA.INF). "+ "Please make sure that the file is present in the "+ "System32 directory and is the proper file."Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.