1. sc215win.exe Driver
2. 600u32.ini File Contents

600u32.ini Driver File Contents (sc215win.exe)

[DS]
PATH=\TWAIN_32\Scanner\SC-215\
DSNAME=600u32.DS
VERSION_INFO=Version 2.00
MANUFACTURER=MINOLTA-QMS
PRODUCTFAMILY=MINOLTA-QMS Scanner
PRODUCTNAME=SC-215/32 V2.00
INTERFACE=DS610CU.dll
UIALWAYSON=0
WARMUPTIMES=1
SAVEPATH=C:\Scanner\

[UI Version]
UI Num=3
0=&EASY
1=&BASIC
2=&EXPERT

[&EASY]
function=CreateSimpleDialog
Curve=0

[&BASIC]
function=_CreateBasicDialog
Curve=0

[&EXPERT]
function=CreateAdvanceDialog
Curve=1

[LANGUAGE]
LANGUAGE=English

[English]
&EASY=simple.dll
&BASIC=basic_e.dll
&EXPERT=advance.dll
TWDSM=twdsm_n.dll
SCANMODE=avscan_n.dll
UIDSM=uidsm_n.dll

Err999=(1)Power Off (2)Cable Failure (3)Device driver not find
Err1=Can not find scanner.
Err2=Scanner R/W test failed.
Err3=Scanner connection failed.
Err4=Scanner RAM test failed.
Err5=Scanner RAM test failed.
Err6=Scanner DMA test/power cable failed.
Err7=Calibration failed.
Err8=Scanner internel error.
Err9=Paper feed error.
Err10=Sensor error. Unlock the scanner by turning the scanner lock to the Use position.
Err11=Transparency calibration error.
Err101=Power off or Cable failure.
Err102=Please remove shipping retainer.
Err103=Paper Jam.
Err104=ADF Cover Open.
Err105=No paper in Auto Document Feeder.
Err106=Job separation sheet detected.
Err107=Can't find transparency kit.
Err108=Transparency it switch is off.
Err109=Internal Target Failure.
Err110=Fuse blown.
Err111=Fuse blown.
Err112=Fuse blown.
Err113=Fuse blown.
Err114=Mechanial system failure.
Err115=Optical system failure.
Err116=Illegal Scanner parameter.
Err117=Illegal Scanner parameter.
Err118=Illegal Scanner parameter.
Err119=Illegal Scanner parameter.
Err120=Illegal Scanner parameter.
Err121=Message Error.
Err122=Image transfer error.
Err123=Unknow error reason.
Err124=No ASPI managers were found.
Err125=Can't find SCSI ASPI.
Err126=An ASPI manager which  does not support windows is resident.
Err127=Memory is not enough.
Err128=Can't find winaspi.dll or wnaspi32.dll.
Err129=Can't find scanner.
Err130=Can't initialize SCSI mamager.
Err50=Termination Timeout.
Err51=Reverse Timeout.
Err52=Forward Timeout.
Err50=Negotiation Timeout.
Err150=Driver Busy.
Err151=Parameter Check Error.
Err152=Allocate Memory Failed.
Err153=Driver Initial Failed.
Err154=Scanner internel error.
Err155=Scanner Connect Failed.
Err156=Start Read Image Error.
Err157=Read Image Error.
Err158=End Image Error.
Err159=Read Abort. For push stop button.
Err160=Driver Initial Failed.
Err161=Send Scanner Parameter Failed.
Err162=Scanner Busy.
Err163=Send Command Error.
Err164=Scanner Warm up.
Err165=PowerOff.
Err170=Parallel Not Found.
Err171=Scanner Connect Failed.
Err172=Scanner Connect Failed.
Err173=Scanner Connect Failed.
Err174=Scanner Initial Failed.
Err175=Scanner Initial Failed.
Err176=Back to Home Position Failed.
Err177=Search Start Position Error
Err178=Can't lamp on.
Err179=Scanner lock error.
Err250=System Error.
Err251=Driver Internal Error.

IDS_LOWMEMORY=Low Memory Condition encountered. Free up some memory and try again.
IDS_NOPAPER=No paper in Auto Document Feeder
IDS_NOPAPER1=Please load paper, and try again.
IDS_NODISK=Not enough disk space
IDS_NODISK1=Please clean up disk and try again.
IDS_WRITEERROR=Write to file error.
IDS_WRITEERROR1=It may be either:
IDS_WRITEERROR2=1.) Disk full
IDS_WRITEERROR3=2.) Disk write protect
IDS_WRITEERROR4=Please check again.
IDS_TRANSFER=Transfert
IDS_CHUNKY=Data Chunky && Transfer
IDS_MEMORY_P=Buffered Memory  /  P
IDS_MEMORY_C=Buffered Memory  /  C
IDS_NATIVE=Native Memory
IDS_NATIVE_P=Native Memory / P
IDS_DISK=Disk File
IDS_DISK_P=Disk File  /  P
IDS_MEMORY=Buffered Memory
IDS_SCAN=Scanning...
IDS_PREVIEW=Preview...
IDS_TESTSCANNER=Scanner Testing
IDS_CONNECTING=Connecting scanner
IDS_CANCEL=Cancel
IDS_TRANSFERMODE=Transfer Mode :
CaliTitle=Do Calibrating...
IDS_PUTPAPERMSG=Put a white, clean paper on scanner
IDS_WAIT=Please wait...
IDS_BADSIZE=Scan size < 64 pixel or 0.5 inch
IDS_BADWIDTH=Scan width is too large
IDS_EASYUI=This UI will be changed to EASY version.
IDS_PRINTWORKING=There are print jobs in processing, please wait till all print jobs done.
IDS_SCANNERSUCCESS=Scanner successful!
IDS_SCANNERFALSE=Scanner disconnect!
IDS_SCANNERUNKNOW=Scanner unknown!
IDS_ENERGY=Closing 'Scanner Utility' will disable the 'Energy Saving' setting
IDS_WARING=Warning
IDS_ERRORCODE=Error Code
IDS_CHANGEMODE=To use the transparency feature, you must first install a transparency kit.
IDS_CONNECTSUCCESS=Scanner success !
IDS_CONNECTFAILURE=Scanner failure !
IDS_CONNECTUNKNOW=Scanner Unknown !
IDS_WARMUP=Scanner lamp has not warmed up yet...
IDS_SECOND=Second
IDS_WAIT=Please wait...
WARMUPTITLE=Warm up scanner
MATCHFILE=Can't find the color match file.