Standard Microsystems Corporation SMC8022T EZ PCMCIA 10Base-T Adapter SMC8022BT EZ PCMCIA Combo Adapter Packet Driver Installation PCMPD syntax: PCMPD [-d] [-h] <PD_INT_NO> [IRQ] [IO_BASE] where: [-d] The "-d" option does not start LAN card until this driver is called by the higher layer programs first. [-h] This option displays the on-line help. <PD_INT_NO> Specifies the software interrupt where to load the packet driver. This value must be specified, and it must be in one of the following ranges: 0x60-0x66 0x68-0x6f 0x78-0x7e 0x67 is the EMS interrupt, and 0x70 through 0x77 are used by the second 8259 interrupt controller. These values are thus not usable. Please note the 0x in front of the value to indicate a hexadecimal number. [IRQ] Specifies the interrupt (IRQ) for the LAN function. All legal IRQ values are supported. If Card Service is installed in the system, PCMPD checks with the Card Service to see if the IRQ you specified is free. If it is, PCMPD uses this IRQ. If it is not free, PCMPD asks the Card Service to assign an available IRQ and use that IRQ instead of the one you specified. If Card Service is not installed, PCMPD will try to use the IRQ you specified regardless whether it is free. In case the IRQ is not free, PCMPD will not be able to come up, or the system may hang. If Card Service is installed in the system, it is recommended that you do not specify the IRQ value and let PCMPD assign it for you. If Card Service in not installed, please make sure the IRQ you assigned, or the default value (5), is not used by another device in the system. [IO_BASE] Specifies the base I/O address. The comment about IRQ assignment also applies to the IO_BASE parameter. If Card Service is installed in the system, it is recommended that you do not specify the IO_BASE value and let PCMPD assign it for you. If Card Service in not installed, please make sure the IO Base you assigned, or the default value (0x300), is not used by another device in the system. Usage examples: 1) The following command loads the Packet Driver at software interrupt 0x60 (hexadecimal). PCMPD 0x60 2) Assuming no Card Service is installed, the next command loads the Packet Driver at software interrupt 60h, LAN hardware interrupt 12, and I/O base address 0x320. PCMPD 0x60 12 0x320 3) The next command line unloads a previously loaded packet driver. PCMPD -uDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.