1. Et32p.zip Driver
  2. OEMSETUP.INF File Contents

OEMSETUP.INF Driver File Contents (Et32p.zip)

 DOWNLOAD NOW
OEMSETUP.INF Driver Update Utility 
;
; KTI ET32/Px PCI Ethernet Adapter
;
[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    PCI
[Options]
    ET32NT
[FileConstants]
UtilityInf      = "UTILITY.INF"
ParamInf        = "NCPARAM.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "KTI"
ProductMajorVersion     = "1"
ProductMinorVersion     = "0"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName     = "ET32NT"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\et32nt.sys"
NetRuleSoftwareType     = "et32ntSys ndisDriver et32ntDriver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """Et32ntSys"" yes no container"
NetRuleSoftwareClass    = {"et32ntDriver basic"}
NetRuleSoftwareBindable = {"et32ntDriver et32ntAdapter non exclusive 100"}
ProductHardwareName     = "ET32NT"
NetRuleHardwareType     = "et32nt et32ntAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"et32ntAdapter basic"}
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
AdapterType = 5         ; PCI Bus
CFID = 805342766        ; 0x30008E2E
VendorID = 36398        ; 0x8E2E
DeviceID = 12288        ; 0x3000
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
           goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    set ActivateDetection = FALSE
    Ifstr(i) $(!NTN_InstallMode) == deinstall
                set StartLabel = removeadapter
        else-Ifstr(i) $(!NTN_InstallMode) == Update
                        set StartLabel = UpgradeSoftware
        else-Ifstr(i) $(!NTN_InstallMode) == bind
                set StartLabel = bindingadapter
        else-Ifstr(i) $(!NTN_InstallMode) == configure
                set CommonStatus = STATUS_REBOOT
                set ActivateDetection = TRUE
                set StartLabel = configureadapter
                Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
                        Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error: cannot get an error string."
                                goto ShellCodeError
                        endif
                        set Error = $($R0)
                        set from = end
                        set to = end
                        goto nonfatalinfo
                endif
    else
                set StartLabel = installadapter
                set OEM_ABANDON_OPTIONS = {}
                set OEM_ABANDON_SOFTWARE = FALSE
                set OEM_ABANDON_ON = TRUE
                set ActivateDetection = TRUE
    endif
    Set DetectedCard = FALSE
    Ifstr(i) $(ActivateDetection) != TRUE
        Goto skipdetection
    Endif
skipdetection =+
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           goto end
        else
           Shell $(UtilityInf), CardExistedDlg
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           ifstr(i) $($R1) != "OK"
               set CommonStatus = STATUS_USERCANCEL
               goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    endif
    CloseRegKey $(KeyProduct)
    Goto adaptersetup

configureadapter = +
    goto successful
    Ifstr $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
            Debug-Output "Cannot find component product key"
            goto fatalregistry
        Endif
    Endif
    Debug-Output "INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "INF: FindService shell failure"
        Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
        Debug-Output "INF: FindService Shell error: "$($R0)
        Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        Debug-Output "Cannot find component service"
        goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
; set initial value for every keyword from Configuration Registry Database.
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
       set ValueItem = $($)
       set ValueName = *($(ValueItem),1)
       set ValueData = *($(ValueItem),4)
       Ifstr(i) $(ValueName) == "InterruptNumber"
           set IRQValue = $(ValueData)
       else-ifstr(i) $(ValueName) == "IoBaseAddress"
           set IOBaseAddrValue = $(ValueData)
       else-ifstr(i) $(ValueName) == "BusType"
           set BusInterfaceType = $(ValueData)
       else-ifstr(i) $(ValueName) == "BusNumber"
           set BusNumber = $(ValueData)
       endif
   EndForListDo
; 84-7-31
adaptersetup =+
;    Shell $(ParamInf) Param_ParameterConfidence
;    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
;        Debug-Output "OEMNADE2.INF: parameter confidence too low to bypass configuration"
;        Goto adapteroptions
;    Endif
;    Ifstr(i) $(DetectedCard) == TRUE
;        Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM
;            Goto adapterverify
;        Endif
;    Endif
    goto adapteroptions
adapteroptions = +
    set from = adapteroptions
    Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
         goto ShellCodeError
    endif
    ifstr(i) $($R0) == {}
         set Error = "ET32/P Series PCI Ethernet Adapter is not present"
         set CommonStatus = USER_CANCEL
         set from = end
         goto nonfatal
    endif
    set AdapterList = $($R0)
adapterverify =+
    Ifstr(i) $(DetectedCard) != TRUE
        Goto skipoptions
    Endif
skipoptions =+
    ifint $(OldVersionExisted) == $(TRUE)
        ifstr(i) $(!NTN_InstallMode) == configure
                goto writeparameters
        endif
    endif
    StartWait
    ifint $(OldVersionExisted) == $(FALSE)
        ifstr(i) $(!NTN_InstallMode) == "install"
                Ifstr(i) $(DoCopy) == "YES"
                    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
                    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        Goto ShellCodeError
                    Else-Ifstr(i) $($R0) == STATUS_FAILED
                        Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                           goto ShellCodeError
                        endif
                        set Error = $($R0)
                        Goto fatal
                    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                        Goto successful
                    Endif
                    Set SrcDir = $($R1)
                Endif
                install "Install-Option"
                ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                    Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif
                    set Error = $($R0)
                    goto fatal
                endif
       endif
       Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
                        $(ProductSoftwareName), +
                        $(ProductSoftwareName), +
                        $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
                        $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
                        $(NetEventDLL)
       Set OEM_ABANDON_SOFTWARE = TRUE
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error"
                goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       set KeyProduct      = $($R1)
       Set SoftNetRulesKey = $($R2)
       CloseRegKey $($R3)
       CloseRegKey $($R4)
       CloseRegKey $($R5)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Registry error: add software components"
                CloseRegKey $(KeyProduct)
                CloseRegKey $(SoftNetRulesKey)
                goto fatalregistry
       endif
       set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
       Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Registry error: add value list."
                CloseRegKey $(KeyProduct)
                CloseRegKey $(SoftNetRulesKey)
                goto fatalregistry
       endif
       set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                        {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                        {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
       Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       CloseRegKey $(KeyProduct)
       CloseRegKey $(SoftNetRulesKey)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Resgitry error: add value list."
                goto fatalregistry
       endif
    endif
    ForListDo $(AdapterList)
        set BusNum = *($($),1)
        set DeviceNum = *($($),2)
        set FunctionNum = *($($),3)
        Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
            $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        ifstr $($R0) != "NO_ERROR"
            set Error = $($R0)
            goto fatal
        endif
        ifstr(i) $($R1) != "YES"
            Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
            ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
            endif
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "Cannot add hardware component"
                goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Registry error: add hardware component"
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
            endif
            set KeyParameters = $($R3)
            set KeyAdapterRules = $($R2)
            set AdapterNumber = $($R4)
            set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
            Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error"
                goto ShellCodeError
            endif
            CloseRegKey $($R1)
            set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
            set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
            set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
            Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Resgitry error: add value list."
                CloseRegKey $(KeyParameters)
                CloseRegKey $(KeyAdapterRules)
                goto fatalregistry
            endif
            CloseRegKey $(KeyAdapterRules)
            goto writeparameters
writeparameters = +
            set BusInterfaceType = 5
            set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
                {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
		{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
		{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
            Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
            ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
                Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
            endif
            CloseRegKey $(KeyParameters)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                Debug-Output "Registry error: Add value list"
                goto fatalregistry
            endif
        endif
    EndForListDo
    EndWait
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
                Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
                                $(ProductSoftwareName)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error"
                                goto ShellCodeError
                endif
                set RegistryErrorIndex = $($R0)
                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                                goto fatalregistry
                endif
    else
                Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
                        $(ProductSoftwareName), $(!NTN_RegBase)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error"
                                goto ShellCodeError
                endif
                set RegistryErrorIndex = $($R0)
                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                                goto fatalregistry
                endif
    endif
    goto end
UpgradeSoftware = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        install "Install-Update"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            goto fatal
        endif
        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
        CloseRegKey $(KeyProduct)
    else
        goto fatalregistry
    endif
    goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error: cannot get an error string."
        goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   exit
[Source Media Descriptions]
    1 = "ET32/P Series PCI Ethernet Adapter Drivers Disk"
[Signature]
    FileType = MICROSOFT_FILE
[GetSignature]
    read-syms Signature
    return $(FileType)
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
[Files-Inf]
1,      oemsetup.inf,    SIZE=31930,     RENAME=$(!UG_Filename)
[Files-ET32NT]
1,ET32NT.SYS , SIZE=30720
[LanguagesSupported]
    ENG
[OptionsTextENG]
    ET32NT     = "KTI ET32/Px Series PCI Ethernet Adapter"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "KTI ET32/Px Series PCI Ethernet Adapter Setup"
ProductSoftwareDescription      = "KTI ET32/Px Series PCI Ethernet Adapter Driver"
ProductHardwareET32NTDescription        = "KTI ET32/Px Series PCI Ethernet Adapter"
ProductSoftwareTitle    = "KTI ET32/Px Series PCI Ethernet Adapter Driver"
ProductHardwareET32NTTitle      = "KTI ET32/Px Series PCI Ethernet Adapter"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2026 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web2, load: 1.32