I92XXD4.INI Driver File Contents (WDM.zip)

[Models]
HDAUDIO\FUNC_01&VEN_8384&DEV_7618&SUBSYS_80862601=this     
Default=this
[DelRegKeys]
HKR\Settings=yes
HKLM\Software\SigmaTel\StacGUI=yes
HKCU\Software\SigmaTel\Settings=yes
HKLM\Software\Sigmatel\STSysTray=yes
HKLM\SOFTWARE\SigmaTel\GlobalState=yes
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=yes
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio2=yes
HKCU\Software\Microsoft\Multimedia\Sound Mapper=Yes
[APPS]
sonicfocussetup=yesinvisible
[CopyFiles]
sttray.exe = 0x24
stacgui.cpl = 0x25
stlang.dll = 0x25
stacsv.exe = 0x25
[RegisterDlls]
stacapi.dll
[LaunchPrograms]
STacSV -r
[HKLM\Software\Microsoft\Windows\CurrentVersion\Run]
SigmatelSysTrayApp="sttray.exe"
[HKLM\SOFTWARE\SigmaTel\GlobalState\STSysTray\1.0]
ShowEventDialog = dword: 1
[HKLM\Software\Sigmatel\STSysTray\1.0]
HideTrayIcon   = dword: 0
PollingPeriod  = dword: 500
RecordPriority = dword: 0
ControlPanel   = "stacgui.cpl"
Automatic      = dword: 1
PopUpType      = dword: 1
HwSpkCfg       = dword: 1
[HKR]
CodecName = "STAC9227"
[HKR\Settings]
InitVerbs                            = hex:
TraceFlags                           = dword: 0x89B3
CPL_SaveExtraPower                   = hex: 0
CPL_MaySwitchExtAmpPowerState        = hex: 0
CPL_UserControlsMaySwitchExtAmpPowerState = hex: 0
CPL_SecondsAfter                     = dword: 5
CPL_SpdifTransmitterEnabledByUser    = hex: 0
CPL_UserControlsFixedDigitalOutRate  = hex: 0
CPL_FixedDigitalOutRate              = dword: 0
MicBoostLevel                        = dword: 0x000A0000
Mic2BoostLevel                       = dword: 0x000A0000
[HKR\Settings\pin]
[HKR\Settings\Pin\0A]
CfgDflt = dword: 0x0221121F     
[HKR\Settings\Pin\0B]
CfgDflt = dword: 0x02A1102E     
Action = hex: 09,0B
[HKR\Settings\Pin\0C]
CfgDflt = dword: 0x01813221     
Action = hex: 09,0C
[HKR\Settings\Pin\0D]
CfgDflt = dword: 0x01014210     
AltCfg = hex: 10,42,21,01     
[HKR\Settings\Pin\0E]
CfgDflt = dword: 0x01A19220     
AltCfg = hex: 20,92,81,01     
Action = hex: 09,0E
[HKR\Settings\Pin\0F]
CfgDflt = dword: 0x400000FF     
[HKR\Settings\Pin\10]
CfgDflt = dword: 0x01216230     
AltCfg = hex: 30,62,01,01     
[HKR\Settings\Pin\11]
CfgDflt = dword: 0x400000FB     
[HKR\Settings\Pin\12]
CfgDflt = dword: 0x400000FC     
[HKR\Settings\Pin\21]
CfgDflt = dword: 0x400000FD     
[HKR\Settings\Pin\22]
CfgDflt = dword: 0x400000FE     
[HKR\Settings\GPIO]
[HKR\Settings\Connselector]
[HKR\Settings\filter\Rear]
UniqueID                             = hex: 0
LegacyIoctlHere                      = hex: 1
RenderConverter                      = hex: 2
SlavedHpConverter                    = hex: 4
CaptureConverter                     = hex: 7
EnableCompositeMuxAndAdcCtrl         = hex: 0
Associations                         = hex: 1,3,2
DisableSPDIFControl                  = hex: 1
DigitalVolumeControl                 = hex: 1
EnableInputMonitor                   = hex: 0
KeepAdcAlwaysOn                      = hex: 0
MasterControlsIndependentMixerInputs = hex: 0
DigitalInputMonitor                  = hex: 1
DIMGainOffsetdB                      = hex: 0
DIMAttenOffsetdB                     = hex: 3
DIMMaxBufferSize                     = dword: 40
DIMBufferPrefill                     = dword: 0
DIMBufferZerofill                    = dword: 1
DigitalStereoMix                     = hex: 1
DSMGainOffsetdB                      = hex: 0
DSMAttenOffsetdB                     = hex: 0
DSMMaxBufferSize                     = dword: 1000
DSMBufferZerofill                    = dword: 1
MicBoost                             = hex: 0
Mic2Boost                            = hex: 0
EnableSetFormatSupport               = hex: 1
EnableHwSpeakerConfigurationSupport  = hex: 0
TurnBiasOffOnNotSelectedPin          = hex: 1
EnabledPcmRenderBitsAndRates         = dword: 0x1F0040
EnabledPcmCaptureBitsAndRates        = dword: 0x1F0040
LoadInputPlugin                      = dword: 104
LoadOutputPlugin                     = dword: 105
[HKR\Settings\filter\Rear\plugins]
RegVersion                           = dword: 1
[HKR\Settings\filter\Rear\plugins\Render]
[HKR\Settings\filter\Rear\TopoNames]
MicIn                                = "{A72A6A9C-896A-45ce-AD88-6BB096B11B36}"   
Mic2In                               = "{D811314C-4178-4F9D-AEBA-5560848ECEF6}"   
Line2In                              = "{CC57D9E2-9750-4B74-B509-41B9B30DC0B5}"   
[HKR\Settings\filter\Rear\MaxLvlLimiters]
MicIn                                = dword: 0x000c0000
Mic2In                               = dword: 0x000c0000
[HKLM\SOFTWARE\Sigmatel\STacGUI]
Config_Tab                           = dword: 0xF
Config_Spk                           = dword: 0x1
Config_Adv                           = dword: 0x109
Config_Digital                       = dword: 0x5
Config_Rates                         = dword: 0x3F
Config_MicLevN                       = dword: 0x1
MicBoost[0]                          = dword: 0xA
Config = dword: 0x0
[HKLM\Software\SigmaTel\StacGUI\XML]
Nconfigs = dword: 0x1
GroupOffset = dword: 0x1
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[0]]
Name      = "Stereo"
Desc      = "Stereo"
Njacks    = dword: 0x6
SpkConfig = dword: 0x4
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[0]\Panel[1]]
X1 = dword: 0x118
X2 = dword: 0x1B8
Y1 = dword: 0xA7
Y2 = dword: 0x14E
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[0]\Panel[2]]
X1 = dword: 0x118
X2 = dword: 0x1B8
Y1 = dword: 0x21
Y2 = dword: 0x7E
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[0]\Jack[0]]
Pos = dword: 0x2
Port = dword: 0xA
Color = dword: 0x1  
Label = dword: 0x0
X1 = dword: 0xE
Y1 = dword: 0x14
X2 = dword: 0x4A
Y2 = dword: 0x50
Ntypes = dword: 0x1
Dev[0] = dword: 0x2  
Seq[0] = hex: 0xF
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[0]\Jack[1]]
Pos = dword: 0x2
Port = dword: 0xB
Color = dword: 0x1  
Label = dword: 0x1
X1 = dword: 0x57
Y1 = dword: 0x14
X2 = dword: 0x93
Y2 = dword: 0x50
Ntypes = dword: 0x1
Dev[0] = dword: 0xA  
Seq[0] = hex: 0xE
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[0]\Jack[2]]
Pos = dword: 0x1
Port = dword: 0xC
Color = dword: 0x3  
Label = dword: 0x0
X1 = dword: 0xD
Y1 = dword: 0x5D
X2 = dword: 0x49
Y2 = dword: 0x99
Ntypes = dword: 0x1
Dev[0] = dword: 0x8  
Seq[0] = hex: 0x1
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[0]\Jack[3]]
Pos = dword: 0x1
Port = dword: 0xD
Color = dword: 0x4  
Label = dword: 0x1
X1 = dword: 0x57
Y1 = dword: 0x14
X2 = dword: 0x93
Y2 = dword: 0x50
Ntypes = dword: 0x2
Dev[0] = dword: 0x0  
Seq[0] = hex: 0x0
Dev[1] = dword: 0x2  
Seq[1] = hex: 0x0
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[0]\Jack[4]]
Pos = dword: 0x1
Port = dword: 0xE
Color = dword: 0x9  
Label = dword: 0x1
X1 = dword: 0x57
Y1 = dword: 0x5D
X2 = dword: 0x93
Y2 = dword: 0x99
Ntypes = dword: 0x2
Dev[0] = dword: 0xA  
Seq[0] = hex: 0x0
Dev[1] = dword: 0x8  
Seq[1] = hex: 0x0
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[0]\Jack[5]]
Pos = dword: 0x1
Port = dword: 0x10
Color = dword: 0x6  
Label = dword: 0x0
X1 = dword: 0xD
Y1 = dword: 0x14
X2 = dword: 0x49
Y2 = dword: 0x50
Ntypes = dword: 0x2
Dev[0] = dword: 0x2  
Seq[0] = hex: 0x0
Dev[1] = dword: 0x0  
Seq[1] = hex: 0x0
[HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio\Volume Control]
LineStates=hex:00,00,00,00,56,00,6f,00,6c,00,75,00,6d,00,65,00,20,00,43,00,6f,00,6e,00,74,00,72,00,6f,00,6c,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,57,00,61,00,76,00,65,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,53,00,57,00,20,00,53,00,79,00,6e,00,74,00,68,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,43,00,44,00,20,00,50,00,6c,00,61,00,79,00,65,00,72,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,49,00,6e,00,70,00,75,00,74,00,20,00,4d,00,6f,00,6e,00,69,00,74,00,6f,00,72,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
[HKLM\Software\Microsoft\Windows\CurrentVersion\RunOnce]
STacAPI = "RegSvr32 /s stacapi.dll"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.86