D-Link DFE-530TX PCI Fast Ethernet Adapter Installation
for Windows 2000
Getting Started
---------------
The Windows 2000 installation CD are needed to complete this
installation. The driver of DFE-530TX rev.A adapter had been
supported on Windows 2000 RC2 or later. If you are DFE-530TX
rev.B user. Please following the steps below.
Windows 2000 Installation Procedure
-----------------------------------
1. Make sure your computer is power-off.
2. Plug the adapter into one PCI slot of your computer.
3. Turn on the power. Your computer should be booting.
4. Windows 2000 will find new hardware, and
"Found New Hardware Wizard" will appear.
5. Insert the driver diskette into the floppy disk, and
press "Next", and "Next" again in the following windows.
6. Select "Specify a location" in the checkbox, and press "Next"
to continue.
7. In the following dialog box, specify the directory of the driver
files. For example:
A:\ (A: is floppy drive)
and then click "OK".
8. The wizard should found the driver now. Follow the direction
to complete installation.
9. After finishing the installation, there should be a new
'Local Area Connection' will appear and the LAN card should works now.
Trouble Shooting
----------------
- Everything is OK in Device Manager, but network adapter still
does't function properly. Please make sure that your Computer
name is different from others in the same network. You can change
your Computer name in
"My Computer" -> "Control Panel" -> "System"
-> "Network Identification"
- Everything appears to be OK but network adapter still doesn't
function properly. Please make sure that the adapter is properly
connected to a network device (ex: HUB) and the "connection type"
for this adapter is set to "AutoSense" or the correct media type.
To check the media type setting, you should start 'Device Manager'
in
"My Computer" -> "Control Panel" -> "System"
In the 'Device Manager', you can find the adapter in 'Network adapters'.
Open the adapter's property and select "Advanced" item. You can find
the connection type setting.
Driver keywords
---------------
- Open 'Device Manager' in "My Computer" -> "Control Pannel" -> "System".
Double click "D-Link DFE-530TX ...", Select "Advanced" item.
Connection Type Specify the connection type for the adapter.
Default: AutoSense
Network Address You can set the Ethernet address for your
adapter. It is not recommended to use this
keyword. As you know two or more adapter in
the same network with same Ethernet address
will cause a little problem.
When using this keyword you need to input
exactly 6 bytes of Ethernet address using
one of the following format:
xx-xx-xx-xx-xx-xx
OR
xxxxxxxxxxxx
Default: read address from adapter ROM.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.