Driver Installation for LAN Manager Workstation/Server
(1) Introduction:
-----------------
This document describes the procedure to setup LAN Manager 2.1
Workstation/Server driver for PRO120(A) PCI Fast Ethernet adapter.
(2) Location of Driver:
-----------------------
(DOS) \MSLANMAN.DOS\DRIVERS\ETHERNET\MXNICF.DOS
(OS/2)\MSLANMAN.OS2\DRIVERS\ETHERNET\MXNICF.OS2
(3) Sample Configuration Files:
-------------------------------
%%% CONFIG.SYS (for DOS will contain) %%%
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\MXNICF.DOS
%%% CONFIG.SYS (for OS/2 will contain) %%%
DEVICE=C:\LANMAN.OS2\DRIVERS\PROTMAN\PROTMAN.OS2 /I:C:\LANMAN.OS2
DEVICE=C:\LANMAN.OS2\DRIVERS\ETHERNET\MXNICF.OS2
%%% PROTOCOL.INI (will contain) %%%
[MXNICF_NIF]
; PRO120(A) RPOTOCOL.INI SAMPLE
DriverName = MXNICF$
;; Range: 0-7.
;; Usage: "Board=nn"
;------------------
; Board = 0
;; Options: TX100, TX100FD, TX10, TX10FD, NWAY.
;; Usage: "MEDIA_TYPE=xxx"
;-------------------------
MEDIA_TYPE = NWAY
(4) Setup Procedures:
---------------------
Before you start with the installation process, make sure that the
adapter is properly installed and configured. Make sure your
Microsoft LAN Manager is properly installed.
1. Run the appropriate Microsoft LAN Manager SETUP for computer you
are setting up.(DOS, OS/2 or OS/2 Server). Select "Configuration"
item ,(the PRO120(A)'s driver isn't included on the LAN Manager disk)
and insert the driver diskette, select the PRO120(A) driver and
follow the directions.
2. When completed, reboot your computer .
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.