Workstation for DOS ODI Client Introduction: ------------- This document describes the procedure to setup the NetWare V3.x,V4.x,V5.x workstation driver for Tamarack TC902x Based 10/100/1000 Ethernet Adapter Location of Driver: \NETWARE\DOSODI\tc902x.COM Sample Configuration Files: --------------------------- STARTNET.BAT: LSL RTSODI IPXODI NETX or VLM (VLM's for NetWare 4.x ) Setup Procedures for NetWare 3.11/3.12 Client : ----------------------------------------------- Before you start with the installation process, make sure that the adapter is properly installed and configured. Make sure that your NetWare workstation is properly installed. 1. Copy RTSODI.COM from the Driver Diskette subdirectory A:\NETWARE\DOSODI to your harddisk. 2. Create a batch file, or add to your STARTNET.BAT file the commands listed above under STARTNET.BAT 3. Edit the NET.CFG file that you copied over. Edit the file per your requirements (see examples above). If there are two frame types listed, whichever frame type is listed first, that is the one that the driver will load. See above for examples. The NET.CFG file should be in the same directory with the LSL.COM file.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.