readme.txt Driver File Contents (en9220f.zip)

   INSTALLATION
  ---------------

This version of the driver requires a base Linux Kernel V2.2.x,
basic utilities and the C development system.

To install the driver, login as root, and extract the files into an 
appropriate directory.

        # mkdir TC902
	# cd TC902
	# tar -zxf tc902x.tar

To create a new driver object module, run

	# make

To install the current driver object module in the filesystem run,

	# make install

To make the driver load when the system boots up, the following lines
needs to be put in any of the startup scripts like /etc/rc.d/rc.local 
or /etc/rc.d/init.d/network

        # /sbin/insmod tc902x.o 
        # /sbin/ifconfig <interface-name> <ip-addr> 

The driver can be dynamically loaded and unloaded from a running kernel 
with the following commands,

	# insmod tc902x
	# rmmod tc902x

To install and test the driver, shutdown the network stack, install
the driver, and re-start the startup the stack again.

	# sh /etc/rc.d/init.d/network stop
	# insmod tc902x
	# sh /etc/rc.d/init.d/network start


PS.If you Linux is RedHat 7.0,RedHat 7.0 is a mixed distribution.
   That is, the version of the kernel is 2.2.16, but the version
   of its include header files is 2.4.0.Therefore, compiling a
   driver becomes a never-succeed problem. To overcome the problem,
   the include header files must be changed from 2.4.0 to 2.2.16.
   To do that, you have to follow procedures below.

      cd /usr/include
      mv asm asm2.4
      mv linux linux2.4
      ln -s /usr/src/linux/include/asm asm
      ln -s /usr/src/linux/include/linux linux

   This essentially makes the header files be the 2.2.16 header
   files. Note that /usr/src/linux is typically where the kernel
   sources are installed.
   For this reason, you have to make sure the kernel sources are
   installed there.

PS.If your Kernel is V2.4.x,you should compiler driver by yourself.
   Please contact http://www.edimax.com.tw to get source code. 
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.38