; This is a sample PROTOCOL.INI file for FPT's TCP/IP using SMC's NDIS driver.
# The generic version of FTP's TCP/IP is required (PC-210)
;
; SMC EtherCard Family (SMC 8003, SMC 8013, SMC 8216)
; v3.06 (940620)
;
[PROTOCOL MANAGER]
DRIVERNAME=PROTMAN$
[SMC8000]
DRIVERNAME=SMC8000$
# IRQ = 3
# RAMADDRESS = 0xD000
# IOBASE = 0x280
# NOTE: THE IRQ, IOBASE, AND RAMADDRESS ARE FOR THE JUMPER
CONFIGURED BOARDS.
# SLOT = 3
# NOTE SLOT = 3 IS FOR THE MICRO CHANNEL BOARD.
[PKTDRV]
DRIVERNAME=PKTDRV$
BINDINGS=SMC8000
INTVEC=0x60
CHAINVEC=0x65
# END OF SAMPLE PROTOCOL.INI FILE.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.