Jan. 1996 Pocket Lan Ethernet Card Setup/Diagnostic program ================================================== The SETUP.EXE program (Setup/Diagnostic) lets you configure the PE-EPP hardware settings, and test the state and cable connection of the card. To run the program, insert the PE-EPP driver program diskette in drive 'A' and do the following: > cd \UTILITY --change directory to UTILITY > SETUP --run the SETUP.EXE program or > cd \UTILITY --change directory to UTILITY > SETUP /F --run the SETUP.EXE with parameter /F if the data in your EEPROM has been corrupted or you cannot configure your card through normal Please run "SETUP /F". Menu Options ============ 1. SETUP lets you configure the hardware settings of PE-EPP. You have the option to view/change : Node ID Printer Port's Base Address Printer Port's IRQ Adapter Model Connector Printer Port's Mode RAM Size Printer Port Writes to Adapter Printer Port Reads from Adapter Runtime Configuration by 2. DIAGNOSTIC lets you diagnose the state and cable connections of PE-EPP.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.