*****************************************************************************
* *
* Installation guide for DX200W / DX200V PCI IN Novell NetWare Server 3.12 *
* *
*****************************************************************************
Location of Driver: \NETWARE\SERVER.312\RTSSRV.LAN
Installaton Procedure :
---------------------
Before you start with the installation process, make sure that
the Novell NetWare v3.12 server is properly installed.
Similarly, your adapter should also be properly installed in your
server.
1. Insert the Driver Diskette into drive A and check the contents
of subdirectory A:\NETWARE\SERVER.312 , It should contain the
following file:
RTSSRV.LAN Novell NetWare V3.12 Server Driver
2. At the NetWare prompt (indicated by the Server name), type
server name: LOAD A:\NETWARE\SERVER.312\ETHERTSM <Enter>
3. To install the server driver, type
server name: LOAD A:\NETWARE\SERVER.312\RTSSRV <Enter>
4. Add the LOAD and BIND statements you require to the server's
AUTOEXEC.NCF file so that the LAN driver will load automatically
each time the server starts up.
Installation Notes:
-------------------
1.Installing Multiple LAN Adapters:
The keyword "SLOT" is provided for multiple LAN adapters in a
single server by the driver RTSSRV.LAN. So, add EtherID in LOAD
commands. For example:
LOAD RTSSRV FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1
BIND IPX TO LAN_A NET=11
LOAD RTSSRV FRAME=Ethernet_802.2 NAME=LAN_B SLOT=2
BIND IPX TO LAN_B NET=22
2. The keyword "MEDIUMTYPE" is provided for specifying adapter's speed
( AUTO, 100FULL, 100HALF, 10FULL, 10HALF ) , add MEDIUMTYPE in LOAD
commands. For example:
LOAD RTSSRV FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1 MEDIUMTYPE=100FULL
BIND IPX TO LAN_A NET=11
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.