***************************************************************************** Linksys LNE100TX Fast Ethernet Adapter (LNE100TX v4) NetWare ODI Client Driver For DOS Workstation ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Copyright (C) 2000 Linksys. All rights reserved. ***************************************************************************** This section describes the procedure to install the NetWare DOS ODI workstation driver for your adapter. Installation Procedure ====================== Before you start with the installation process, make sure that the adapter is properly installed and configured. Make sure that your NetWare operating system is properly installed. If there are NetWare client programs such as: LSL.COM, IPXODI, and VLM.EXE in your system already, you can use the following procedures to setup your system. 1. Copy the A:\NETWARE\Client\DOS\LNE100TX.COM file to the NetWare client directory which contains NET.CFG, LSL.COM, IPXODI.COM, and VLM.EXE with related *.VLM files. 2. Update the NET.CFG file. You can refer to the NET.CFG sample. 3. Make sure to add LASTDRIVE=Z in your CONFIG.SYS file. 4. Enter the following commands to connect to your Novell server: LSL LNE100TX IPXODI VLM F: LOGIN <user_name> ** NOTE ** Multiple LAN Adapters in a system: If you want to install multiple LAN adapter in your system, you have to use "SLOT" keyword in NET.CFG to select which adapter to use with your netware client. Configuration Files =================== File Name: NET.CFG Sample of configuration file: ----------------------------------------------------------------------------- Link Driver LNE100TX FRAME Ethernet_802.2 FRAME Ethernet_802.3 FRAME Ethernet_SNAP FRAME Ethernet_II ; No_Early_Rx_Interrupt_Enable ; Certification, please remove the ; first ";" of this line ; FORCE_MEDIA ; Connection_Type = 10MFD ; 10M 10MFD 100M 100MFD, default is AUTO TX_THRESHOLD = 0 ; 0..3, 4=Store and forward, default=0 RX_THRESHOLD = 1 ; 0..2, 2=Store and forward, default=1 CAL = 2 ; 0..3, default = 2 PBL = 10 ; 0,1,2,4,8,10,20, default = 10 Rx_Buffer_Size = 100 ; Hex number, 100-600 ; Slot 1 RX_FIFO_SIZE = 2 ; 0..2, 0 ~ 2:2K, 3:1K; 0 is default NetWare DOS Requester FIRST NETWORK DRIVE = F NETWARE PROTOCOL = NDS BIND ; MAX IPG = 0 ; PBURST READ WINDOW SIZE=45 ; PBURST WRITE WINDOW SIZE=45 ----------------------------------------------------------------------------- All trademarks and brand names mentioned belong to their respective owners. ** Note ** Its PCI cycle maybe slower on some machines. At this time, you should enable store and forward function in NET.CFG.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.