MIMAKI ENGINEERING CO., LTD. http://www.mimaki.co.jp/ Special notice for use of Windows NT 4.0 vector/raster plotter driver 1. Applicable Plotters JV-1300 Color Inkjet Plotter 4 colors JV2-130 Color Inkjet Plotter 6 colors CG-LX CG-100LX/130LX Cutting Plotter CG-ST CG-60ST Cutting Plotter CG-EX CG-60EX/100EX/130EX Cutting Plotter CG-T8 CG-51/61/101/121/131 Cutting Plotter CG-T4 CG-3/5/6/9/12 Cutting Plotter CG-T1 CG-50/100SD Cutting Plotter CG-PR CG-45/90SD/120/60/90/60I/90I Cutting Plotter [MX] MX-11P/10P Pen Plotter MX-11PII/10PII Pen Plotter MX-740/760/790 Pen Plotter MX-340/360/390 Pen Plotter MX-340EX/360EX/390EX Pen Plotter MX-340VX/360VX/390VX Pen Plotter [CF] X Y CF-60P 640mm 1270mm CF-60T 590mm 1190mm CF-60D 610mm 1120mm CF-120P 1270mm 1270mm CF-120T 1220mm 1190mm CF-120Tex 1220mm 1250mm CF-150P 1570mm 1270mm CF-150D 1540mm 1120mm CF-150C 1520mm 1160mm CF-150T 1520mm 1190mm CF-150Tex 1520mm 1250mm CF-0907 700mm 900mm CF-0912 1200mm 900mm CF-1215 1500mm 1200mm CF-1215Tex 1500mm 1230mm CF-1218 1800mm 1200mm CF-1218Tex 1800mm 1230mm CF-4620P 4600mm 2000mm 2. Confirmed Special Notices (1)In some cases, printing as specified in the application is unavailable due to gradient of TrueType font. (2)A printing may be partially lost from a drawing in some case. (3)No printing or incompletion of printing may be occurred whenever capacity in the hard disk in which a system is installed is insufficient. Ensure to provide sufficient memory capacity. (4)Since the maximum numerical printing capability is limited to 16 bit and below in setting up for some application, printing may be impracticable on a selected paper size. 3. Installing Method of Driver (1)When a previous version of this driver is installed, remove the old driver. (2)Restart the computer before installing the driver. (3)Double click "My Computer" and "Printers" icon in this order so as to open the printer dialog box. Double click "Add Printer" icon therefrom. (4)"Add Printer Wizard" will be opened. First selecting either Local printer, or Network Printer, then push the button for the "Next" processing. Hereinafter, the case to select "Local printer" shall explain. (5)Selecting a port to be connected from the "Available ports", push the button for the "Next" processing. (6)Install a floppy disk into the FD drive, push the button to "Have Disk...", then push the OK button. (7)Hence the printer name will be appeared, select the plotter so as to push the button for the "Next" processing. (8)Input the printer name to change, push the button for the "Next" processing. (9)Selecting the "Shared/Not shared" of network users, push the button for the "Next" processing. (10)After selecting the "Yes/No" of test page, push the "Finish" button. (for JV series only) 3. Examples for Elimination of Troubles (1)Please use JV2-130 when the plotter's ROM version is vl.28 and over. (2)When a cutting is to be achieved by "Adobe Illustrator7", the following precaution shall be followed. Character: Only outline with void of maximum 0.5 point in line-width Graphic : Without intermediate coat of maximum 0.5 point in line-width (3)RS-232C Set up. DATA BITS:8 BITS 10/07/1999 Windows NT 4.0 are the trademarks of Microsoft Inc. Adobe Illustrator is the trademark of Adobe Systems Inc. 76filesDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.