Demo testing of Wake-On-LAN on RE100ATX/WOL adapter
--------------------------------------------------
1) Install RE100ATX/WOL card in a free PCI slot of motherboard.
The PC (Station A) use must support power management.
2) The PC must be in the power off state. Standby power is supply to
RE100ATX/WOL adapter through the PCI bus.
3) Install another RE100TX-PCI or RE100ATX/WOL card in another PC (Station B).
Boot up MS-DOS and run the diagnost utility.
4) Select Power Management option and then Magic packet option.
It will prompt to input the destination MAC address of the RE100ATX/WOL
adapter. Enter the MAC address of the RE100ATX/WOL that is installed in
Station A and press Enter key.
Immediately Station A on receiving the Magic packet will be wake up and
the PC will start to boot.
5) Wake-On-LAN using Magic packet test is successfully executed.
--------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.