Readme_c.txt Driver File Contents (s0023v22.exe)

                                                  MIMAKI ENGINEERING CO., LTD.
                                                  http://www.mimaki.co.jp/


Special notice for use of Windows NT 4.0 vector/raster plotter driver

1. Applicable Plotters
    JV-1300            Color Inkjet Plotter 4 colors
    JV2-130            Color Inkjet Plotter 6 colors
    CG-LX              CG-100LX/130LX Cutting Plotter
    CG-ST              CG-60ST Cutting Plotter
    CG-EX              CG-60EX/100EX/130EX Cutting Plotter
    CG-T8              CG-51/61/101/121/131 Cutting Plotter
    CG-T4              CG-3/5/6/9/12 Cutting Plotter
    CG-T1              CG-50/100SD Cutting Plotter
    CG-PR              CG-45/90SD/120/60/90/60I/90I Cutting Plotter
[MX]
    MX-11P/10P           Pen Plotter
    MX-11PII/10PII       Pen Plotter
    MX-740/760/790       Pen Plotter
    MX-340/360/390       Pen Plotter
    MX-340EX/360EX/390EX Pen Plotter
    MX-340VX/360VX/390VX Pen Plotter
[CF]                    X            Y
    CF-60P              640mm        1270mm
    CF-60T              590mm        1190mm
    CF-60D              610mm        1120mm
    CF-120P            1270mm        1270mm
    CF-120T            1220mm        1190mm
    CF-120Tex          1220mm        1250mm
    CF-150P            1570mm        1270mm
    CF-150D            1540mm        1120mm
    CF-150C            1520mm        1160mm
    CF-150T            1520mm        1190mm
    CF-150Tex          1520mm        1250mm
    CF-0907             700mm         900mm
    CF-0912            1200mm         900mm
    CF-1215            1500mm        1200mm
    CF-1215Tex         1500mm        1230mm
    CF-1218            1800mm        1200mm
    CF-1218Tex         1800mm        1230mm
    CF-4620P           4600mm        2000mm

2. Confirmed Special Notices
 (1)In some cases, printing as specified in the application is unavailable due
    to gradient of TrueType font.
 (2)A printing may be partially lost from a drawing in some case.
 (3)No printing or incompletion of printing may be occurred whenever capacity
    in the hard disk in which a system is installed is insufficient.
    Ensure to provide sufficient memory capacity.
 (4)Since the maximum numerical printing capability is limited to 16 bit and
    below in setting up for some application, printing may be impracticable on
    a selected paper size.

3. Installing Method of Driver
 (1)When a previous version of this driver is installed, remove the old driver.
 (2)Restart the computer before installing the driver.
 (3)Double click "My Computer" and "Printers" icon in this order so as to open
    the printer dialog box.
    Double click "Add Printer" icon therefrom.
 (4)"Add Printer Wizard" will be opened. First selecting either
     Local printer, or Network Printer,
    then push the button for the "Next" processing.
    Hereinafter, the case to select "Local printer" shall explain.
 (5)Selecting a port to be connected from the "Available ports", push the button
    for the "Next" processing.
 (6)Install a floppy disk into the FD drive, push the button to "Have Disk...",
    then push the OK button.
 (7)Hence the printer name will be appeared, select the plotter so as to push
    the button for the "Next" processing.
 (8)Input the printer name to change, push the button for the "Next" processing.
 (9)Selecting the "Shared/Not shared" of network users, push the button
    for the "Next" processing.
(10)After selecting the "Yes/No" of test page, push the "Finish" button.
    (for JV series only)
3. Examples for Elimination of Troubles
 (1)Please use JV2-130 when the plotter's ROM version is vl.28 and over.
 (2)When a cutting is to be achieved by "Adobe Illustrator7", the following
    precaution shall be followed.
      Character: Only outline with void of maximum 0.5 point in line-width
      Graphic  : Without intermediate coat of maximum 0.5 point in line-width
 (3)RS-232C Set up.
    DATA BITS:8 BITS

10/07/1999

     Windows NT 4.0 are the trademarks of Microsoft Inc.
     Adobe Illustrator is the trademark of Adobe Systems Inc.

76files
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 4.56